Parts for Lg LRE3194BD/01: Controller (Ii) Parts

Secures interior panels and components. Replace when stripped, corroded, or missing to stop rattles and secure loose trim. Verify fit with your model number.

A factory screw for securing specified components in your appliance. Replaces a missing or damaged fastener to restore a tight, reliable hold and help reduce vibration, rattling, and misalignment.

• Secures brackets, covers, or internal assemblies where this exact screw is specified by the manufacturer
• Useful when the original screw is missing, stripped, or corroded
• Helps eliminate looseness, vibration, and rattling noises
• Matches the original fastener for proper fit and thread engagement

• Disconnect power (and shut off water supply if applicable) before servicing
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Replace any damaged clips or inserts to ensure a secure repair

Replacement washer that secures fasteners and distributes load at connection points in ranges and ovens. Needed when original is missing, worn, or damaged.

Replacement screw for electric and gas ranges. Secures internal components and panels. Needed when original is stripped, missing, or damaged during repair.

Secures panels, brackets, and internal components in your range. Replace this screw if the original is missing, stripped, or rusted for proper fit.

This customized screw secures appliance components where a standard fastener won't fit, helping keep panels, brackets and small assemblies stable. It's a direct-fit replacement when the original specialized screw is missing or damaged. What it does:

• Fastens and holds appliance panels, brackets or small parts in place
• Prevents rattling, loose trim or misaligned components caused by a missing or stripped screw
• Matches the OEM fit and thread pattern for proper engagement and alignment
• Used in locations that require a non-standard or customized fastener

• Disconnect power and water before servicing the appliance
• Use the correct screwdriver or driver bit to avoid stripping the head
• Tighten securely but do not overtighten; overtightening can strip threads or crack parts
• Keep removed hardware organized so you can reinstall in the original location

This hardware washer helps distribute fastener load and maintain proper spacing in your LG appliance. Replacing a missing or worn washer restores secure mounting and alignment, reducing vibration and rattling from loose assemblies.

• Distributes the load of a screw or bolt and protects mating surfaces to maintain alignment
• Helps keep components secure and at the correct spacing
• A damaged or missing washer can lead to loosening, vibration, or rattling during operation
• Ensures correct hardware stack-up during reassembly after service

• Disconnect power and shut off water or gas before servicing
• Note the order and orientation of any washers/spacers; take a reference photo
• Use the correct driver or wrench and tighten snugly—do not overtighten
• Replace companion hardware if corroded, stripped, or damaged

The Common Nut is an OEM part for LG ranges. It secures the fan blade to the motor shaft. This nut maintains the fan's stability and preventing it from becoming dislodged during use.

Causes of a bad common nut can include loosening over time due to vibration, improper installation, or damage from impact or mishandling.

Symptoms of a bad common nut include:

• Excessive noise or vibration from the fan assembly
• The fan blade becoming loose or detached, causing poor air circulation
• Potential risk of the fan blade becoming a projectile if completely detached

This OEM LG part is also compatible with some Kenmore models.a

The Screw is an OEM component specifically designed for LG ranges. It plays an important mounting and fastening role by securely attaching internal components together.

The screws utilized within the range cabinet ensure sturdy construction and reliable mechanical cohesion. They allow for simple assembly and proper alignment of inner parts. 

Causes of bad screws can include wear and tear over time, or damage from overtightening leading to stripped threads or heads.

Symptoms of bad screws include:

• Loose, detached, or misaligned inner parts  
• Hardware that does not fit or interface as designed
• Unintended noises or movement during the operation

This OEM LG replacement part is also compatible with Sears/Kenmore and some GE ranges utilizing similar fasteners. Replacement ensures the range remains mechanically sound.
 

This idle bracket is the support bracket that holds the dryer idler/roller assembly in place to keep the drum turning smoothly and reduce noise. Replaces a worn or bent support bracket to restore stable drum alignment. What it does:

• Secures the idler or roller assembly so the drive belt stays tensioned and aligned
• Prevents drum wobble and sag that can cause rubbing or scraping noises
• Reduces bearing and belt wear by keeping the idler assembly stable
• Commonly replaced when the bracket is bent, cracked, or causing loud squeaking/grinding

• Disconnect power before beginning any service; follow all safety guidelines for your appliance
• Remove exterior panels and the drum or front bulkhead as required to access the bracket
• Inspect the idler/roller and belt; replace damaged components together for best results
• Use existing fasteners unless new hardware is supplied; avoid over-tightening to prevent cracking

Outer door frame assembly for electric ranges. Restores door structure and appearance when original is cracked, bent, or worn. Mounts door panel securely.

Replaces damaged or missing poise cover on your range. Restores finished appearance and protects components from dust. Direct-fit trim piece.

Insulator for electric and gas ranges. Replaces cracked, broken, or missing insulation components. Restores proper heat protection and spacing.

Cushion pad insulator that mounts between internal range components and cabinet. Reduces noise and vibration while preventing wear. Replace if cracked or missing.

Replacement window glass for range oven doors. Restores clear viewing area when original glass is cracked, chipped, cloudy, or shattered. Installs inside door.

Door mounting bracket for electric ranges. Secures the door assembly to the frame. Replace if bracket is bent, cracked, or missing for proper door alignment.

Secures and pivots your range door for smooth operation. Replace if door sags, rubs, or won't close evenly. Confirm fit with your model number.

Bracket that secures the door handle to your range. Replace if cracked, broken, or missing to properly mount and support the handle assembly.

Mounting bracket secures internal components and panels in your range. Replace if cracked, bent, or missing to restore proper alignment and support.

Fixes unresponsive controls, display errors, or oven not heating in electric ranges. Main power control board manages all cooking functions. Moderate difficulty repair, 30-45 minutes with basic tools.

Fix burners not working, unresponsive buttons, or display issues. This range display control board manages the digital interface and burner controls.

Range controls not responding or functions intermittent? This wire harness restores electrical connections between components. Moderate DIY repair for most models.

Fix intermittent power issues or burnt wiring in your range with this wire harness. Restores electrical connections between control boards and components.

This Supporter, PCB is the mounting bracket that secures a refrigerator control circuit board in place, helping prevent movement and vibration so electrical connections stay stable for reliable operation. What it does:

• Holds the PCB assembly securely in the control compartment to prevent dislodging or contact with other components
• Reduces vibration and strain on wire connectors and solder joints that can cause intermittent electrical issues
• Keeps the board positioned for correct connector alignment and airflow around electronics
• Helps protect the PCB from incidental contact during routine service

• 1 support bracket for the PCB

• Power off and unplug the appliance before accessing the control compartment
• Remove any covers or panels to reach the PCB; note connector positions before disconnecting
• Secure the bracket and PCB with the original fasteners; do not overtighten plastic mounting points

The Range Control Panel is an OEM replacement part for LG electric ranges and cooktops. It contains an electronic interface including touch buttons, icons, and displays to operate burners and oven functions.

Symptoms of a faulty control panel can include:

• Unresponsive or inaccurate touch controls  
• Illegible or non-functional LED readings
• Inability to program oven temperature or time
• Error codes or control lockout issues

Causes may involve prolonged moisture degrading circuits, cracked/broken circuit boards from impact or flexing, or wear over repeated usage cycles and cleanings. 

This authentic LG control panel is compatible with select Kenmore brand models.

This is a circular wire harness holder that secures and organizes internal wiring within the range. It clips onto the frame or mounting points to keep wires routed properly and away from heat sources. Replace this part if it is broken or missing, which can cause loose wiring or potential contact with hot surfaces.

This is a warming zone heating element assembly designed for a range cooktop. It provides low, even heat to keep food warm without further cooking. Replace this element if the warming zone no longer heats up, heats unevenly, or fails to maintain a consistent temperature.

Protective cover that installs over the power cord connection on your electric range. Replace if cracked, broken, or missing to restore appearance.

This is the glass main cooktop assembly that forms the top cooking surface of the range. It provides the smooth glass platform over the heating elements where cookware is placed. Replace this assembly if the glass is cracked, chipped, scratched deeply, or if heat damage has caused discoloration or warping.

Idle packing bushing for electric and gas ranges. Replaces worn, cracked, or missing bushings. Ensures proper fit and cushioning for range components.

Rear cover panel for electric ranges. Replaces cracked, broken, or missing back covers. Installs on the rear exterior of the range body. Direct fit.

Fix loose or rattling heating elements with this range heater bracket. Secures the heater assembly in proper alignment to prevent movement and damage.

Burner not heating? This radiant surface element restores heat to your electric range's smooth-top cooking surface. DIY-friendly replacement part.

This Radiant Surface Element is an OEM replacement part for LG electric ranges and cooktops. It is a high-power coil heating unit located below the cooktop surface that provides efficient, customizable heat for various cooking needs.

Causes of failure can be wear and damage to coiled filaments from prolonged heating cycles, cracking of ceramic insulators, or loose wiring connections suffering arcing or resistance over time.

Symptoms of a faulty element include:

• Slow or inadequate heating of cookware even on high settings
• Temperature fluctuations within the heating zone
• Burning or charring of spills and foods on the element itself
• Tripped circuit breakers obstructing range operation

This replacement is also compatible with some Kenmore models

This is a radiant surface heating element measuring 5-1/2 inches in diameter and rated at 1200 watts. It sits beneath the glass cooktop surface and provides heat to the burner area when activated. Replace this element if the burner fails to heat, heats unevenly, or does not reach full temperature.

Rubber bumper grommet for electric and gas ranges. Replaces cracked, worn, or missing grommets that cushion and support range components.

Oven rack for electric and gas ranges. Provides stable surface for cookware during cooking. Replace if bent, warped, cracked, or missing.

Fix unresponsive control panel buttons with this tactile switch replacement. Restores reliable button response. Simple DIY repair, typically under 5 minutes.

The Convection Fan Motor is an OEM component for LG stove tops and ranges. It refers to the small electric motors used within certain LG gas or electric range models. 

Causes of a faulty cooking range motor include normal wear from years of operation in high-heat environments. Grease and food deposits can also impair motor performance over time.

Symptoms of a bad motor include:

• Loud grinding or humming noises from inside the range
• Reduced or no ventilation/air flow during cooking  
• Convection bake features not functioning properly
• Motors failing to start or run at all

This OEM LG part can also be used on Kenmore/Sears appliances. 

The HARNESS, SINGLE is an OEM component specifically designed for LG gas ranges. It is a custom wiring assembly that electrically connects critical range functions such as ignition, valve operation, and thermostats/sensors. Proper signal transmission through this single integrated harness is essential for safe and effective cooking performance.

Causes of a bad single gas harness can include damaged insulation from abrasion over time or loose connections disrupted by normal range movement. Physical impacts or overheating could also degrade individual harness wires. 

Symptoms of a bad single harness include:

• Inability to ignite burners or light doesn't stay lit 
• Burners failing to turn off automatically  
• Faulty burner temperature control
• Error codes or safety issues triggering range lockouts

Replace yours today with this genuine OEM wiring harness to ensure all range systems communicate reliably. This ensures your LG gas range remains durable and dependable for years to come.

The Magnetron Thermostat is an OEM part for LG microwaves and built-in ranges. Its primary function is to monitor the temperature and ensure that it remains within a safe operating range. If the temperature exceeds the preset limit, the thermostat will interrupt the power supply to the magnetron, preventing overheating and potential damage.

Causes of a faulty magnetron thermostat can include electrical malfunctions, component failures, or physical damage. These factors can result in issues such as erratic heating, microwave not heating properly, or the appliance shutting off unexpectedly.

Symptoms of a bad magnetron thermostat may include:

• Microwave not heating food evenly or at all
• Inconsistent or weak heating performance
• Microwave shutting off or displaying error codes related to temperature issues

This OEM LG part can also be used on Kenmore/Sears appliances. 

Replace your range's wire harness if the existing wiring is damaged, frayed, or showing signs of wear. Connects electrical components inside your range.

If your oven won't reach the right temperature or shows an F9 error, the temperature sensor may be faulty. Simple DIY repair in under 45 minutes.

Replace a damaged or corroded wire harness in your range. This single-connection harness restores proper electrical connections when original wiring is frayed, melted, or broken.

Charcoal filter removes cooking odors and smoke in recirculating range hoods. Replace every 6 months for optimal air quality. Verify fit with model number.

A replacement bracket assembly that secures internal components and maintains correct alignment for reliable operation. Restores proper mounting and reduces noise or movement caused by loose or damaged supports. What it does:

• Provides a secure mounting point for internal appliance components to prevent shifting or sagging
• Restores alignment that can stop rattling, vibration, or intermittent contact issues
• Supports housings, panels or subassemblies to maintain proper clearance and function
• Replaces bent, cracked, or broken brackets that compromise component stability

• One bracket assembly as shown

• Recommend disconnecting power (and water, where applicable) before beginning any repair
• Remove panels or covers as needed to access the mounting location; keep fasteners organized
• Use appropriate hand tools; inspect adjacent parts and replace any damaged fasteners or clips

Bake element not heating? This relay control board restores voltage to heating elements and regulates oven temperature controls and cooking functions.

Wire harness for electric ranges. Connects internal electrical components. Replace if wires are frayed, damaged, or connectors are broken or melted.

Range not baking evenly or convection mode not working? This convection fan circulates hot air for even cooking. Common repair for uneven baking issues.

This replacement bar serves as the exterior door handle/trim that lets you open and close the appliance door smoothly while restoring the unit's original appearance. It's a direct-replacement style part designed to fit the factory mounting points. What it does:

• Provides a secure grip for opening and closing the appliance door
• Restores damaged, cracked, or cosmetically worn door trim/handle areas
• Helps maintain proper door alignment and fit when installed correctly
• Reduces draft and keeps the door sealing surface operating as intended

• One replacement bar

• Disconnect power (and for refrigerators, unplug the unit) before attempting removal/installation
• Remove any door shelves or trim blocking access; support the door during handle removal to avoid damage
• Reuse any required screws or brackets only if shown in OEM instructions; replace damaged fasteners

This is an AC synchronous motor and switch assembly that controls the oven door lock mechanism during the self-clean cycle. It engages to lock the door before high-temperature cleaning begins and unlocks it once the cycle is complete and the oven has cooled. Replace this assembly if the oven door fails to lock or unlock, or if the self-clean cycle will not start or complete properly.

Mounting supporter bracket that stabilizes internal components in your electric range. Replace if cracked, broken, or missing to restore proper alignment.

Fix uneven heating or loose heating elements with this electric range heater bracket. Secures the bake or broil element in proper position for consistent cooking.

Replace your burned-out or dim oven light bulb to restore interior visibility while cooking. Direct-fit incandescent lamp for safe food monitoring. Verify fit with your model number.

Oven won't brown or crisp food on top? Replace the broil element. This upper heating component restores efficient broiling in electric ranges.

Oven won't heat or reach temperature? A failed bake element causes inconsistent temps and uneven cooking. Direct replacement, moderate DIY repair.

Oven door gasket seals the door to retain heat and improve energy efficiency. Replace if torn, cracked, or heat escapes. Verify fit with your model number.

The range packing seal creates an airtight barrier around oven doors or other range components to maintain proper cooking temperatures and prevent heat loss. Positioned around door edges or component joints, it needs replacement if heat escapes, cooking becomes uneven, or the seal appears cracked or compressed.

This sheath heater is the electric element that delivers radiant heat for the unit's heating cycles, such as grill/broil or convection. Replacing a failed heater restores proper temperature performance and consistent results.

• Generates radiant heat when energized to help reach and maintain set temperature
• Supports grill/broil or convection functions for browning and even cooking
• Common failure signs: no heat in those modes, extended preheat times, uneven results, tripped breaker, or a visibly blistered/broken element
• Restores reliable heating performance when the original element is open or shorted

• Disconnect power and let components cool before servicing
• If servicing a microwave, remember high-voltage components can retain a dangerous charge; discharge the capacitor and consider service if you're not experienced
• Handle the element by its brackets; avoid bending the sheath or stressing terminals
• Move wires one at a time to the new part and verify element continuity with a multimeter before reassembly

Secures and supports your range oven door hinge for proper alignment and smooth operation. Replace if bracket is cracked, bent, or damaged to restore door fit.

This is an exterior side panel that forms part of the range cabinet, providing a finished appearance and structural support. It is made of metal with a black finish and attaches to the side of the unit. Replace this panel if it is dented, rusted, scratched, or otherwise damaged.

Base plate for electric and gas ranges. Provides structural support at the bottom of the range. Replace if cracked, warped, or damaged from wear.

Front plate for electric ranges. Installs on the range front panel. Replace if cracked, chipped, damaged, or missing to restore appearance.

This is a panel that covers and encloses the storage or warming drawer area at the bottom of the range. It provides a finished exterior surface and helps protect internal components behind the drawer. Replace this panel if it is dented, cracked, warped, or missing, which can affect the appearance and proper closure of the drawer.

Rubber foot pad that supports and stabilizes your range on the floor. Replace if cracked, broken, worn, or missing to keep your appliance level.

This is a metal anti-tip bracket that secures the range to the floor or wall to prevent it from tipping forward. It is a critical safety device, especially when heavy items are placed on an open oven door. Replace or install this bracket if yours is missing, damaged, or if you are repositioning the range after a move or kitchen remodel.

Replacement slider for range drawers and panels. Restores smooth movement when original is worn, cracked, or broken. Mounts to moving components for alignment.

Replace worn range drawer sliders to restore smooth, quiet operation and proper alignment. Prevents damage to surrounding trim. Confirm fit with your model.

Mounting anchor for range door handles. Replaces worn, broken, or missing anchors to restore secure handle attachment and eliminate wobbling or loose fit.