Parts for Lg LRE3060ST/00: Controller Parts

A factory screw for securing specified components in your appliance. Replaces a missing or damaged fastener to restore a tight, reliable hold and help reduce vibration, rattling, and misalignment.

• Secures brackets, covers, or internal assemblies where this exact screw is specified by the manufacturer
• Useful when the original screw is missing, stripped, or corroded
• Helps eliminate looseness, vibration, and rattling noises
• Matches the original fastener for proper fit and thread engagement

• Disconnect power (and shut off water supply if applicable) before servicing
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Replace any damaged clips or inserts to ensure a secure repair

This customized washer is a small hardware piece that secures fasteners and helps distribute load where screws or bolts attach to appliance components. It restores proper fit and reduces movement at the connection point. What it does:

• Provides a stable bearing surface for screws or bolts to prevent pull-through and material damage
• Helps keep fasteners tight and reduces vibration-related loosening or rattling
• Maintains correct spacing and alignment of panels or internal parts
• Can help form a seal on fasteners in locations prone to vibration or minor movement

• Disconnect power and water (if applicable) before servicing the appliance
• Retain or replace the associated fastener; small parts can be easily lost—work on a clean surface

This factory-specified fastener secures designated panels and components, restoring a precise fit and helping keep your appliance solid and quiet. Replace a missing, stripped, or rusted original with the correct OEM match for the specified locations.

• Secures brackets, panels, and internal parts where this part number is called out
• Replaces damaged, stripped, corroded, or lost screws
• Helps reduce looseness and vibration that can cause rattling noises
• Exact OEM replacement for positions requiring this specific screw

• Disconnect power and shut off water/gas before servicing
• Match to the removed screw and install only in the locations specified for this part number
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening, especially into plastic
• If multiple screws are involved, start all fasteners before final tightening to ensure alignment

This customized screw secures appliance components where a standard fastener won't fit, helping keep panels, brackets and small assemblies stable. It's a direct-fit replacement when the original specialized screw is missing or damaged. What it does:

• Fastens and holds appliance panels, brackets or small parts in place
• Prevents rattling, loose trim or misaligned components caused by a missing or stripped screw
• Matches the OEM fit and thread pattern for proper engagement and alignment
• Used in locations that require a non-standard or customized fastener

• Disconnect power and water before servicing the appliance
• Use the correct screwdriver or driver bit to avoid stripping the head
• Tighten securely but do not overtighten; overtightening can strip threads or crack parts
• Keep removed hardware organized so you can reinstall in the original location

This control board assembly directs power and communication to key components, interpreting inputs and sensor signals so the appliance runs the correct functions and cycles. Replaces a failed electronics module to restore reliable operation.

• Distributes power and control signals to major components per the unit's programmed logic
• Interfaces with sensors and the user controls to execute selected functions
• Coordinates cycle timing and safety monitoring
• Common signs of failure: no power or won't start, unresponsive controls/display, intermittent operation, error codes, or unexpected shutdowns

• Disconnect power to the appliance before servicing
• Handle the board by the edges; use ESD protection to avoid static damage
• Photograph and label connectors, then transfer them one at a time to the new board
• Secure wiring to avoid pinching; follow the unit's tech sheet or service manual

The Screw is an OEM component specifically designed for LG ranges. It plays an important mounting and fastening role by securely attaching internal components together.

The screws utilized within the range cabinet ensure sturdy construction and reliable mechanical cohesion. They allow for simple assembly and proper alignment of inner parts. 

Causes of bad screws can include wear and tear over time, or damage from overtightening leading to stripped threads or heads.

Symptoms of bad screws include:

• Loose, detached, or misaligned inner parts  
• Hardware that does not fit or interface as designed
• Unintended noises or movement during the operation

This OEM LG replacement part is also compatible with Sears/Kenmore and some GE ranges utilizing similar fasteners. Replacement ensures the range remains mechanically sound.
 

This idle bracket is the support bracket that holds the dryer idler/roller assembly in place to keep the drum turning smoothly and reduce noise. Replaces a worn or bent support bracket to restore stable drum alignment. What it does:

• Secures the idler or roller assembly so the drive belt stays tensioned and aligned
• Prevents drum wobble and sag that can cause rubbing or scraping noises
• Reduces bearing and belt wear by keeping the idler assembly stable
• Commonly replaced when the bracket is bent, cracked, or causing loud squeaking/grinding

• Disconnect power before beginning any service; follow all safety guidelines for your appliance
• Remove exterior panels and the drum or front bulkhead as required to access the bracket
• Inspect the idler/roller and belt; replace damaged components together for best results
• Use existing fasteners unless new hardware is supplied; avoid over-tightening to prevent cracking

This replacement door handle restores a secure, easy-grip opening to your refrigerator door. It matches the OEM shape and mounting points so the door operates smoothly and looks factory-fresh. What it does:

• Replaces a cracked, loose, or broken refrigerator door handle so the door is easier and safer to open.
• Restores proper grip and leverage for normal daily use.
• Reinstalls to existing factory mounting points to maintain door alignment and appearance.
• Helps prevent further cabinet or door damage caused by using a compromised handle.

• One refrigerator door handle

• Requires removing the old handle and securing the replacement to the same factory screw bosses; use the original screws unless new hardware is explicitly listed.
• Handle hardware may be hidden under trim—check for set screws or clips before prying.
• Support the door while working to avoid strain on hinges; two-person assistance recommended for larger doors.
• Disconnect power only if required for surrounding panels—this is an exterior handle replacement and typically does not require electrical disconnection.

Replacement window glass that restores a clear viewing area in the appliance door and helps maintain a clean, sealed surface. Ideal for replacing cracked, chipped, or cloudy glass to improve visibility and safety. What it does:

• Provides a transparent viewing window so you can monitor cycles without opening the door.
• Replaces cracked, chipped, or fogged glass to restore appearance and function.
• Serves as the door's viewing surface and works with the door assembly and trim.
• Inspect surrounding gaskets, trim, and fasteners when replacing the glass to ensure a proper fit.

• Disconnect power (and water, if applicable) before attempting any repair.
• Wear cut-resistant gloves and eye protection when handling or removing glass.
• Door disassembly and removal of trim or retaining clips is commonly required.
• If the glass is shattered, remove broken pieces carefully and dispose of them per local regulations.

Hinge assembly that secures and pivots the appliance door for smooth, stable operation. Restores proper alignment and sealing to reduce sagging, rubbing, and help the door close evenly. What it does:

• Supports and guides the door pivot to maintain correct opening and closing motion.
• Restores proper door alignment and sealing to improve performance and reduce leaks or cold spots.
• Reduces sagging, rubbing, and noisy or stiff door movement.
• Helps the door latch and close evenly for reliable use.

• Always disconnect power (and water supply, if applicable) before starting repairs.
• Support the door before removing the old hinge to prevent dropping or damage.
• Use appropriate hand tools; avoid forcing parts and do not overtighten fasteners.

This mounting bracket secures internal components or panels to restore proper alignment and support. Replacing a damaged bracket helps stop rattling, sagging, or loose panels for safer, more reliable appliance operation. What it does:

• Provides structural support for panels, trim, or internal components.
• Prevents movement that can cause rattling or noise during operation.
• Restores proper alignment when a worn or broken bracket lets parts sag or shift.
• Helps maintain secure fitment after repair or component replacement.

• One mounting bracket as shown.

• Disconnect power to the appliance before starting any repair.
• Basic hand tools (screwdriver, nut driver) are typically required; for exact fasteners.
• Remove surrounding trim or panels carefully to access the bracket; keep hardware for reassembly.
• If multiple brackets show wear, inspect and replace as needed to ensure even support.

The Main PCB Assembly is an OEM component specifically designed for LG gas ranges. Housed within the control panel housing, this printed circuit board directs all cooking functions from ignition systems to oven baking elements and temperature displays. Precise programming optimizes every meal preparation.

Symptoms of a bad main PCB include:

• Burners failing to light or operating intermittently  
• Inability to adjust oven temperatures or timers
• Erratic sounds, lights, or error notifications   
• Diagnostic trouble codes appearing

Causes of a bad main PCB can include water damage damaging circuits, power surges deteriorating components, or loose connections preventing communications. Without directing burners and ovens properly, the range cannot cook foods effectively or efficiently. 

This LG OEM replacement ensures dependable performance. Compatible also with select Kenmore gas ranges.

The Display PCB Assembly is an OEM part for LG ranges. This part controls and displays the digital interface of the range, providing users with important information such as temperature settings, cooking modes, and timers.

Causes of a bad display PCB assembly can include electrical surges, moisture damage, or general wear and tear over time. 

Symptoms of a bad display PCB assembly include:

• The display not lighting up or being dim
• Inaccurate or scrambled information shown on the screen
• Unresponsive touchpad or buttons
• Error codes appearing without an apparent cause

This OEM LG part is also compatible with some Kenmore models.

This single wire harness connects controls and components to deliver power and signals so affected functions run correctly. It replaces a damaged harness to restore reliable electrical connections and consistent operation. What it does:

• Transfers power and control signals between the control board and individual components
• Restores missing or intermittent power to components when a harness is damaged
• Prevents shorts and poor connections caused by frayed wires or broken terminals
• Typical symptom: appliance or specific functions do not power up, run intermittently, or behave erratically

• Disconnect power to the appliance before starting any work.
• Match connector shapes and wire colors; seat each connector fully until it clicks.
• Route the harness following existing clips and retainers to avoid chafing or pinching.
• If terminals are corroded or connectors are damaged, replace the harness rather than attempting repairs.

This single wiring harness connects electrical components to restore reliable power and signal routing within the appliance. It replaces damaged or burnt harnesses to help return normal operation and prevent intermittent faults. What it does

• Routes power and signal between control boards, sensors, and motors for proper operation
• Replaces frayed or melted wiring that can cause intermittent function or component failures
• Helps resolve symptoms like no power to a component, intermittent operation, or error codes related to open circuits
• Restores factory wiring organization and secure connector fit for reliable connections

• One wiring harness assembly

• Disconnect power before servicing to avoid shock or damage
• Verify connector orientation and fully seat all plugs; do not force connectors
• Replace only with the exact harness to maintain correct wire lengths and connector types

The Range High Limit Thermostat is an OEM part for LG ranges and cooktops. It monitors surface heating elements and oven temperatures, acting as an important safety device. 

Causes of a bad high-limit thermostat can include wear over time, exposure to excessive heat or moisture, or damage from impact. Without a properly functioning thermostat, there is risk of overheating.

Symptoms of a bad high limit thermostat include:

• Heating elements or oven fail to heat or heat unevenly
• Recurring error codes related to temperature 
• "Clicking" sounds from components trying to heat
• Safety issues like food not properly cooking through

This OEM LG part is also compatible with select Sears/Kenmore models.

A circular lug designed to join a stripped wire to a threaded terminal for a secure electrical connection. Helps restore reliable contact at terminals and reduces the chance of intermittent power or arcing at connection points. What it does:

• Provides a strong mechanical and electrical connection between a wire and a screw or bolt terminal.
• Helps prevent loose connections that can cause intermittent operation, sparking, or overheating.
• Commonly used where a ring-style termination is required for safe, stable wiring.
• Works with properly sized wire and fasteners to maintain consistent conductivity.

• Always disconnect power to the appliance before inspecting or replacing electrical parts.
• Use the correct lug size and gauge for the wire and terminal; crimp or solder per manufacturer recommendations.
• Tighten terminal hardware to the appliance manufacturer's specified torque; avoid over-tightening which can damage the lug or terminal.
• If wiring insulation or the terminal is damaged or corroded, replace the affected components rather than reusing them.

The HARNESS, SINGLE is an OEM component specifically designed for LG ranges. It is a custom wiring assembly that electrically connects critical range functions such as ignition, valve operation, and thermostats/sensors. Proper signal transmission through this single integrated harness is essential for safe and effective cooking performance.

Causes of a bad single gas harness can include damaged insulation from abrasion over time or loose connections disrupted by normal range movement. Physical impacts or overheating could also degrade individual harness wires. 

Symptoms of a bad single harness include:

• Inability to ignite burners or light doesn't stay lit 
• Burners failing to turn off automatically  
• Faulty burner temperature control
• Error codes or safety issues triggering range lockouts

Replace yours today with this genuine OEM wiring harness to ensure all range systems communicate reliably. This ensures your LG gas range remains durable and dependable for years to come.

This heater assembly replaces the dryer's heating unit to restore warm air for effective drying. It fits into the dryer's blower/air path and provides the heat source needed to evaporate moisture from clothing. What it does:

• Houses the heating element and directs warm air through the drum
• Restores normal drying temperatures when the original heater fails
• Common symptom: dryer runs but clothes remain damp or take much longer to dry
• Common symptom: reduced or no warm air coming from the dryer

• Disconnect power (and gas supply for gas models) before beginning any repair
• Handle heating elements and terminals carefully to avoid damage
• After installation, test dryer operation and check for proper airflow and secure electrical connections

This plate assembly is the glass turntable that supports and rotates food for even cooking in a microwave. It restores a stable, flat surface so cookware and dishes can turn smoothly during operation. What it does:

• Provides the rotating surface that transfers microwave-heated food through steady motion
• Helps promote even cooking and reheating by allowing the turntable to rotate
• Replaces cracked, chipped, or unstable plates that can rattle or impede rotation
• Fits on the microwave's roller support and couples with the drive hub to spin correctly

• Unplug the appliance before installing to avoid electrical hazard
• Handle glass with care; inspect for chips or cracks before use
• Place plate onto the roller support and ensure it seats properly on the drive hub

This heater bracket is a metal mounting support that holds the appliance's heater or heating element securely in place, helping maintain proper alignment and reduce movement. Replacing a bent or broken bracket restores stable support for the heater assembly. What it does:

• Secures the heater or heating element to the appliance frame so the element stays aligned and does not contact other components.
• Prevents rattling, shifting, or sagging of the heater assembly that can cause noise or uneven heating.
• Helps maintain safe clearances between the heater and surrounding parts.
• Used when the original bracket is cracked, bent, or missing hardware.

• Disconnect power (and gas, if applicable) before beginning work to avoid electrical shock or gas hazards.
• Handle metal parts carefully — edges may be sharp. Wear gloves and eye protection.
• Match the part number and orientation, secure all fasteners, and ensure the heater is properly aligned before restoring power.

This radiant surface element fits beneath the glass cooktop and delivers direct, even heat to your cookware. Replace a burned-out or damaged burner to restore consistent heating when a smoothtop zone no longer performs correctly.

• Generates radiant heat under the ceramic-glass surface for a surface burner
• Helps resolve no-heat, very slow/uneven heating, or only part of the element glowing
• Restores reliable temperature control when a cooking zone won't respond to settings
• Suitable replacement when burn marks or breaks are visible beneath the glass

• Disconnect power at the breaker and let the cooktop cool completely before servicing
• Lift or remove the glass top to access the element; note and label wire positions
• Handle the element carefully; avoid flexing the coil or disturbing insulation
• Transfer any mounting clips/brackets from the old element if required, then reassemble and test

This Radiant Surface Element is an OEM replacement part for LG electric ranges and cooktops. It is a high-power coil heating unit located below the cooktop surface that provides efficient, customizable heat for various cooking needs.

Causes of failure can be wear and damage to coiled filaments from prolonged heating cycles, cracking of ceramic insulators, or loose wiring connections suffering arcing or resistance over time.

Symptoms of a faulty element include:

• Slow or inadequate heating of cookware even on high settings
• Temperature fluctuations within the heating zone
• Burning or charring of spills and foods on the element itself
• Tripped circuit breakers obstructing range operation

This replacement is also compatible with some Kenmore models

This radiation heater is the element that delivers direct radiant heat for the microwave's grill/browning feature. Replacing a failed heater restores proper grilling performance and helps foods brown and crisp during grill or combination-cook settings. What it does:

• Supplies radiant heat for grill/browning and combo-cook modes
• Typically mounted at the top of the cavity to radiate heat downward
• Common failure symptoms: no heat in grill mode, element does not glow, poor or uneven browning
• Visual clues can include cracks, blistering, or burnt spots on the heater

• 1 radiation heater element

• Disconnect power before servicing; microwaves contain high-voltage components that can retain a charge even when unplugged
• Access may require removing the outer case and interior shroud; beware of sharp metal edges
• Note wire positions before removal; route leads away from hot or moving parts during reassembly
• Verify secure mounts and connections before testing the grill function

The Oven Rack is an OEM part for LG ranges. This part provides a stable surface for placing cookware during baking, roasting, and broiling.

Causes of a bad oven rack can include exposure to high temperatures over time, which can weaken the metal, or accidental damage that causes bending or warping.  

Symptoms of a bad oven rack include:

• Warping or bending of the rack
• Difficulty sliding the rack in and out of the oven
• The rack not sitting level within the oven

This OEM LG part is also compatible with some Kenmore models.

This small, board-mounted tactile push-button switch is used on the control panel. It registers a momentary press so the control board can accept your selection. Replacing a worn switch restores reliable button response and consistent operation.

• Mounts to the user interface board and provides momentary contact when a button is pressed
• Sends a low-voltage signal to the control, enabling cycle or option selection
• Typical failure symptoms: unresponsive or intermittent buttons, needing extra force to register, stuck/always-on input, or unintended beeps/changes
• Helps restore consistent user-interface input when an individual button switch has failed

• Disconnect power to the appliance before servicing; shut off gas/water if applicable
• Access the control panel to reach the user interface board
• This is a board-level repair; note switch orientation. Replacement may require desoldering/soldering per OEM procedure
• Use ESD precautions and avoid overheating PCB pads; test button function before reassembly

This single-wire harness connects electrical circuits in compatible LG appliances to restore reliable power and signal routing. It replaces a damaged or worn harness to help resolve intermittent operation or loss of function caused by broken wires or connectors. What it does:

• Re-establishes electrical connections between controls, sensors, or motors
• Helps stop intermittent operation caused by frayed or broken wires
• Replaces harnesses with damaged connectors or visible insulation wear
• Prevents arcing and poor contact from corroded terminals when installed correctly

• Disconnect power (unplug or turn off breaker) before starting any repair
• Match connectors and wire routing to the original harness to avoid pin miswiring
• Inspect connectors and mating terminals for damage before installation

The Magnetron Thermostat is an OEM part for LG microwaves and built-in ranges. Its primary function is to monitor the temperature and ensure that it remains within a safe operating range. If the temperature exceeds the preset limit, the thermostat will interrupt the power supply to the magnetron, preventing overheating and potential damage.

Causes of a faulty magnetron thermostat can include electrical malfunctions, component failures, or physical damage. These factors can result in issues such as erratic heating, microwave not heating properly, or the appliance shutting off unexpectedly.

Symptoms of a bad magnetron thermostat may include:

• Microwave not heating food evenly or at all
• Inconsistent or weak heating performance
• Microwave shutting off or displaying error codes related to temperature issues

This OEM LG part can also be used on Kenmore/Sears appliances. 

The Thermistor is an OEM replacement part for LG gas ranges. It serves as a highly sensitive temperature sensor mounted inside the oven cavity. 

Symptoms of a bad thermistor include:  

• Inability to select certain cooking modes like bake or convection that involve temperature control
• Fluctuating or inaccurate temperature readouts on oven displays
• Irregular cooking outcomes like hot/cold spots inside the oven
• Repeated error codes regarding temperature sensing issues

Causes can be attributed to prolonged exposures to heat and intermittent combustion byproducts inside the oven. Over a decade of use, these conditions may degrade the thermal and electrical properties of sensor components. 

This genuine LG replacement thermistor installs effortlessly. Installing a new thermistor restores temperature monitoring required for reliable gas oven performance. 

The Main Control Board is an OEM part for LG electric ranges. As the central processing component, it operates all cooktop and oven functions including heating element control, temperature regulation, timers, and safety features.

Symptoms of a faulty main control board involve:

• Heating coils or burners failing to switch on or reaching proper heat levels  
• Oven temperature displays flickering or failing to read accurately
• Timers malfunctioning or failing to countdown correctly
• Recurring error codes disabling use of oven or cooktop functions

Causes can be moisture damage seeping circuitry over time. Electrical anomalies from power fluctuations are also possible causes of failure. 

This LG replacement is compatible with select Kenmore models as well.

The Terminal block connect is an OEM part for LG ranges. It serves as a terminal connection point for various control boards and components within the range. The terminal block provides a secure connection hub where multiple wires can reliably transmit power and signals between electrical parts. 

Causes of a bad terminal block can include loose or corroded connections due to age, wear and tear over excessive use, or failure of electronic components it supports. 

Symptoms of a bad terminal block include:

• Intermittent or complete loss of function for certain range features  
• Electrical shorts, sparks, or unexpected shutdowns
• Inability to power on the entire appliance
• Error codes related to control boards it connects

This OEM LG part is also compatible with Sears/Kenmore ranges. 

This incandescent oven lamp provides interior illumination so you can safely check food without opening the door. Direct replacement for a burned or dim oven/range light to restore cooking visibility. What it does

• Replaces a burned-out or flickering oven interior light bulb
• Restores clear visibility of the oven cavity for monitoring cooking progress
• Helps avoid opening the oven door unnecessarily, preserving oven temperature
• Fits the original lamp socket and installs in the oven light housing

• Disconnect power to the appliance before replacing the lamp to prevent electric shock
• Allow the oven and old bulb to cool completely before handling
• Use a cloth or gloves when installing the new lamp to avoid transferring oils from skin

The Broil Element is an OEM replacement part for LG electric ranges. As a vital upper heating system, this broil element helps efficiently brown and crisp foods placed directly under or on the top rack of the oven.

Causes of a defective broil element may relate to normal wear and tear on the coils from repeated high-heat cooking. Food residues adhering over time can reduce performance.

Symptoms of a problematic broil element include:

• Inadequate or uneven browning from the top-level heating system   
• Diminished functionality of the broil setting on the control panel
• Potential thermal damage or exposed wiring from a failed element

This OEM component fits some Kenmore/Sears electric range models as well. 

The Bake Element is an OEM replacement part for LG wall ovens and ranges. It is responsible for providing heat during the bake functions.

Symptoms of a bad bake element include:

• Inconsistent or unreliable bake temperatures
• Hot/cold spots leading to uneven cooking results
• Premature failure of bake cycles or overload tripping

Causes can be normal wear over thousands of heating cycles. Improper cleaning allowing residue buildup may also degrade element performance prematurely. Accurate, dependable heat is required for successful baking.

This OEM LG part is also compatible with Kenmore and Frigidaire wall ovens and ranges.

The Oven Door Gasket is an OEM part for LG ranges. This seal creates an insulating barrier between the hot oven interior and the external environment. The gasket ensures proper heat retention for energy efficiency and is responsible for safely containing heat inside during baking and broiling.

Causes of a faulty door gasket can include wear and tear from frequent opening and closing of the oven door over the years. Damage caused by aggressive cleaning chemicals or abrasive scrubbing is also possible. 

Symptoms of a bad gasket include:

• Premature heat loss that reduces the oven's cooking capability  
• Discomfort from direct heat radiating around the outer door surface
• Physical deterioration or gaps in the insulation compromising the seal

This OEM LG part is also compatible with some Kenmore ranges featuring LG oven systems. Replacing the worn gasket ensures safe, efficient oven operation.

This control panel assembly is the front user interface that holds the touchpad/buttons and display, restoring responsive controls and a finished look to the appliance. It replaces a cracked, faded, or unresponsive front control surface. What it does

• Provides the front-mounted buttons/touchpad and display lens used to select cycles and functions.
• Routes user input to the appliance's control electronics so commands register correctly.
• Restores a damaged, cracked, or scratched control surface that interferes with button use.
• Helps address symptoms such as unresponsive or stuck buttons, missing or obscured markings, and visible panel damage.

• One control panel assembly (front user interface)

• Disconnect power to the appliance before beginning work to avoid shock.
• Remove outer trim or screws as needed; handle the display lens and ribbon cables gently to avoid damage.
• Keep small screws and clips organized during disassembly; reconnect all cables securely before reassembly.

This genuine control panel provides the front user interface for your appliance, restoring access to buttons, touchpads, and on-screen indicators so you can operate cycles and settings reliably. Ideal when the existing panel is cracked, unresponsive, or cosmetically damaged. What it does:

• Houses the appliance's main buttons/touchpads and display elements so commands register correctly
• Replaces worn or damaged button surfaces that cause missed or sticky inputs
• Restores visible status indicators and labels for clear operation
• Helps resolve intermittent or non-working controls when the panel itself is the failure

• One control panel assembly as shown

• Disconnect power before starting to avoid shock or damage
• Access may require removing the trim or console; keep track of screws and retainers
• Handle the panel carefully to avoid scratching the surface or damaging connectors

This foot is a small rubber base pad that supports and stabilizes the appliance on the countertop or cabinet surface. Replacing a worn or missing foot helps keep the unit level and reduces vibration and slipping.

• Provides stable, non-slip support on flat surfaces
• Helps keep the appliance level for proper operation
• Replaces missing, cracked, or flattened feet
• Can reduce vibration, rattling, or shifting during use

• Unplug the appliance before servicing
• Turn the unit on its side/back for access to the base
• Pull off the old foot and press the new one firmly into place (some models may use adhesive or a tab fit)
• Verify the unit sits level; replace additional feet as needed

This idler bracket mounts the idler pulley or roller in your appliance's tensioning system, keeping a belt or cable aligned and properly tensioned for consistent operation. A bent or worn bracket can cause noise, slippage, or loss of motion.

• Secures the idler pulley/roller in the correct position
• Maintains proper belt/cable tension and alignment
• Helps reduce squealing or squeaking from friction/misalignment
• Can address belts/cables coming off or intermittent movement in the drive mechanism

• Disconnect power; also shut off gas or water before servicing
• Access the tensioner area and note the belt/cable routing and spring orientation
• Relieve tension, remove the old bracket, and transfer the pulley/roller and any spring or hardware as required
• Reinstall the bracket, ensure smooth free movement, route belt/cable correctly, and test operation

This replacement slider restores smooth, guided movement for the appliance component it mounts to, helping reduce sticking, binding and noise. A simple, low-cost part that returns parts to proper alignment and operation. What it does:

• Guides and supports a moving panel or drawer to ensure even, low-friction travel
• Reduces binding, catching or noisy movement when the original slider is worn or damaged
• Keeps the associated component aligned to prevent uneven wear or mis-tracking
• Helps restore normal operation without replacing larger assemblies

• One replacement slider

• Disconnect power to the appliance before beginning any repair
• Remove the affected panel/drawer per the appliance service instructions to access the slider
• Inspect surrounding tracks or mounting tabs for damage and replace if necessary
• Test movement after installation; if binding persists, re-check alignment

This slider is a replacement glide piece that helps a drawer or sliding compartment move smoothly and stay aligned. Replacing a worn slider restores quiet, consistent travel and prevents wear on the surrounding trim. What it does:

• Guides and supports a drawer or sliding compartment for even movement
• Reduces sticking, scraping, and noisy operation from worn glides
• Keeps the drawer aligned to prevent rubbing or binding against the cabinet
• Helps extend life of associated rails and trim by restoring proper tracking

• One slider glide piece

• Disconnect power to the appliance and remove any contents before servicing
• Remove the drawer or access panel per your appliance instructions to reach the slider
• Inspect mating rail and fasteners; replace any damaged clips or screws for a secure fit

This door handle mounting anchor creates the fixed attachment point on the appliance door or drawer. Replacing a worn or missing anchor restores a solid, wobble-free handle and a consistent feel when opening and closing.

• Provides the secure mounting point that the handle fastens to
• Helps keep the handle aligned and rigid during use
• Replace if the anchor is cracked, stripped, or missing
• Resolve a loose/wobbly handle, a handle that won't tighten, or misalignment after service

• Disconnect power; turn off the water supply
• Protect the door/drawer finish and support the handle during removal
• Remove the handle per your model's instructions and take out the damaged anchor
• Install the new anchor using the existing mounting location/hardware, seat the handle fully, then tighten set screws evenly without overtightening