Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Parts for Maytag MVW18PDBWW0: 03 - Controls And Water Inlet Parts

Parts for Maytag MVW18PDBWW0: 03 - Controls And Water Inlet Parts

Location on Diagram
Part Description
Price & Availability
Best Seller
Product photo
5.0 (9)
By: Whirlpool
Part Number: W10501250

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

More
$28.43

IN STOCK
Ships Today Guaranteed
Add to Cart
1
By: Whirlpool
Part Number: W10461094

This is the front-facing control panel (console assembly) for a dryer, in white. It houses the buttons, knobs, and display used to select cycles, temperatures, and other dryer settings. Replace this panel if the buttons are unresponsive, the panel is cracked, or if cycle selections no longer register properly.

More
$117.95

IN STOCK
Ships Today Guaranteed
Add to Cart
2
Product photo
By: Whirlpool
Part Number: WPW10131839

Control transformer that provides stable low-voltage power to the washer's control and user interface, ensuring reliable electrical signaling so cycles start and the machine operates correctly. What it does:

  • Supplies the control board and user controls with the required control voltage.
  • Restores power to displays, timers, and electronic controls when the transformer has failed.
  • Common symptom: machine is dead, display is blank, or cycles won't start.
  • Can cause intermittent power or control glitches before full failure.
What's included: One transformer. Install notes:
  • Disconnect power before servicing to avoid shock—follow lockout/tagout if required.
  • Compare part number and mounting style to the original before installation.
  • Handle terminals and wiring carefully; secure all connections and mounting hardware.

More
$75.95

IN STOCK
Ships Today Guaranteed
Add to Cart
3
By: Whirlpool
Part Number: W10860435
$330.16

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
4
By: Whirlpool
Part Number: WPW10461159

Rear panel for laundry center units. Covers the back of the appliance cabinet. Replace if cracked, dented, rusted, or missing for complete enclosure.

More
$204.62

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
5
Product photo
5.0 (2)
By: Whirlpool
Part Number: WP489069

Size: 1/4 inch hex head, 10-12 x 1/2 inch.

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
6
Best Seller
Product photo
4.6 (8)
By: Whirlpool
Part Number: WP90767

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

  • Loose or wobbly components within the appliance
  • Panels or parts that are not securely attached
  • Rattling or unusual noises due to loose parts
  • Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
7
By: Whirlpool
Part Number: W10472992
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

8
Product photo
5.0 (2)
By: Whirlpool
Part Number: W10846509

The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear bulkhead to the tub, ensuring vibrations are reduced through solid mounting points. Properly installed screws dampen oscillating movement.

Causes of a bad screw include damage from water exposure like corrosion or breakage from stress concentrations if the tub bangs around during imbalanced loads. 

Symptoms of a bad screw include:

  • Loose or detached rear bulkhead allowing side-to-side play
  • Excessive noise and shaking felt through the surrounding walls   
  • Development of micro-cracks around screw holes over time
  • Potential leak paths if holes are no longer sealed 

This Whirlpool replacement screw restores a stable suspension system. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
9
By: Whirlpool
Part Number: W11637765
$53.94

IN STOCK
Ships Today Guaranteed
Add to Cart
10
By: Whirlpool
Part Number: WPW10647075
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

11
By: Whirlpool
Part Number: WPW10157932

This foam seal cushions and seals the icemaker area to reduce vibration and prevent air leaks that can affect ice quality and efficiency. It's a direct-fit replacement designed to restore proper sealing around the icemaker housing. What it does:

  • Cushions the icemaker assembly to reduce noise and movement
  • Helps seal gaps to limit warm air intrusion that can cause icemaking issues
  • Supports consistent ice production by maintaining the intended airflow path
  • Resists compression set for reliable sealing over time
What's included:
  • One foam seal for the icemaker housing
Install notes:
  • Basic installation; remove power to the appliance before starting
  • Align the seal to the icemaker housing, pressing into place until fully seated
  • Inspect surrounding surfaces for debris or damage and clean before installing

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
12
By: Whirlpool
Part Number: W10480949
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

Best Seller
Product photo
5.0 (9)
By: Whirlpool
Part Number: W10501250

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

More
$28.43

IN STOCK
Ships Today Guaranteed
Add to Cart
13
Product photo
By: Whirlpool
Part Number: WPW10486031

This is the appliance's water inlet valve. It controls and opens the water supply to the unit at the correct times so cycles can fill properly and dispense water where needed.

  • Regulates incoming water flow to the appliance
  • Can address no water to ice maker or dispenser
  • May correct humming or buzzing from a stuck solenoid
What's included: 1 water inlet valve assembly Install notes:
  • Disconnect power and shut off the water supply before servicing
  • Keep a towel handy; a small amount of residual water may spill
  • Transfer any mounting hardware or fittings from the old valve if required
  • After installation, restore water, check for leaks, then test operation

More
$109.41

IN STOCK
Ships Today Guaranteed
Add to Cart
14
By: Whirlpool
Part Number: W10472990
$65.75

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
15
Best Seller
Product photo
4.8 (4)
By: Whirlpool
Part Number: WP3390631

10 - 16 x 1/2

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
16

Nut

By: Whirlpool
Part Number: WPW10131123
$2.20

IN STOCK
Ships Today Guaranteed
Add to Cart
17
By: Whirlpool
Part Number: W10133515

Replace your damaged or missing dryer shield. This protective guard installs inside the cabinet to prevent contact with internal components.

More
$35.95

IN STOCK
Ships Today Guaranteed
Add to Cart
18
By: Whirlpool
Part Number: W10461104
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

19
Best Seller
Product photo
5.0 (24)
By: Whirlpool
Part Number: WP596669

The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.

Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

  • Leaks at the hose connection points
  • Hoses slipping off the connections
  • Visible rust or damage on the clamp
  • Reduced appliance efficiency due to leaks

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

More
$7.48

IN STOCK
Ships Today Guaranteed
Add to Cart
20
By: Whirlpool
Part Number: WPW10461189
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

21
By: Whirlpool
Part Number: WPW10482833
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

22
By: Whirlpool
Part Number: W10461068
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

23
Product photo
4.7 (3)
By: Whirlpool
Part Number: WP16123

Rubber washer gasket for washer fill hose connections. Replace if worn or leaking at coupler adapter. Measures 1-1/16 x 5/8 inch. Verify fit with model.

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Product photo
5.0 (9)
By: Whirlpool
Part Number: W10501250

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

More
$28.43

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google