Parts for Ge WPGT9360C0PL: 01 - Controls, Backsplash & Top Panel Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This control panel assembly replaces a damaged or worn right-side console section to restore button access and the front-facing control surface. It provides the visible panel and button openings so controls operate and look correct. What it does:

• Replaces a cracked, faded, or broken right-side control panel section
• Restores proper button alignment and access for the right-side controls
• Helps stop debris or moisture from entering the front console area
• Addresses symptoms such as unresponsive or physically damaged right-side buttons, broken panel surface, or cosmetic wear

• Disconnect power to the appliance before starting any repair to avoid shock.
• Removal typically requires accessing the console area and removing fasteners; keep track of screws and small parts.
• Handle the panel carefully to avoid scratching the finish or damaging button openings; use soft tools to pry clips.

The control panel assembly is mounted on the top or front of your washing machine and contains all user interface buttons and displays. Replace when buttons become unresponsive, the display malfunctions, or the panel shows physical damage.

Back panel for washer exterior. Installs on rear of cabinet to enclose internal components. Replace if cracked, dented, rusted, or missing panel.

This lid assembly covers the top opening of your washer and includes the necessary mounting hardware. It provides access to the wash tub while ensuring safe operation when the lid is closed. Replace it when the lid is cracked, doesn't close properly, or the safety switches don't function correctly.

This door release cable connects the dryer door latch to the release mechanism so the door opens and closes reliably. Replaces a worn or broken cable to restore normal door operation and improve safety. What it does:

• Transfers motion from the door handle to the latch so the door can be opened and closed
• Helps ensure the door stays securely closed during operation
• Commonly replaced when the door won't latch or handle feels loose
• Prevents intermittent door-release failures that can stop dryer cycles

• Disconnect power before beginning any repair to avoid shock or injury
• Inspect the latch, handle, and routing path and replace any damaged clips or fasteners
• Basic hand tools typically required; follow OEM instructions for routing and attachment

The washer display control board manages the digital display and user interface functions on front-loading and top-loading washers. It processes button inputs and shows cycle information, time remaining, and error codes. If your washer's display is blank, shows garbled text, or buttons don't respond properly, this control board needs replacement.

Replacement top cover panel for your washer. This exterior trim piece covers the top of the machine. Order a new one if yours is cracked or damaged.

White top cover panel for washer lid assembly. Replaces cracked, broken, or damaged covers. Direct fit for compatible GE Profile top-load models.

White trim that finishes the edge around your washer lid. Replaces cracked, chipped, or broken trim that catches clothing or prevents smooth closing.

Right-side cap insert for your washer. Replaces the original cover if it's cracked, broken, or missing. Restores a clean, finished appearance to your machine.

Left side door hinge for washers. Installs on the left door frame to support opening and closing. Replace if cracked, broken, or loose. Fits select models.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Replace your washer's right door hinge if it's cracked, broken, or causing the door to sag. This hinge secures the door panel to the washer cabinet frame.

This is a replacement mounting screw used to secure appliance panels and components, restoring proper fit and reducing vibration or rattling. Use it to replace a missing or damaged fastener for a secure repair. What it does:

• Secures panels, trim, brackets, or small components in place
• Restores proper panel alignment and reduces rattling or vibration
• Replaces stripped, missing, or corroded screws that cause loose parts
• Helps maintain electrical and mechanical connections by holding parts steady

• Turn power off and unplug the appliance before beginning any repair
• Use the matching driver or bit to avoid stripping the screw head
• Replace only with the same type and size screw for a proper fit
• Inspect surrounding parts for wear

Fix a washer that won't stop filling or leaks water with a new inlet valve assembly. Controls water flow during fill and rinse cycles. 30-minute DIY repair.

Fix detergent not dispensing or leaking from your washer. This dispenser drawer replacement restores proper soap delivery. Moderate DIY repair.

Fix detergent leaking before wash starts or not dispensing properly. This washer dispenser cup holds liquid or powder detergent until the correct cycle phase.

Screw and gasket assembly for washers. Secures components and ensures proper seal. Replace if screw is stripped, gasket is cracked, or assembly is missing.

Replace your washer's pressure switch hose if cracked, kinked, or leaking. This tube connects the pressure sensor to the tub for water level control.

Washer circulation filter assembly removes lint and debris from wash water. Replace if clogged or damaged to maintain optimal cleaning. Verify fit with your model.

Connects your washer to the water supply. Replace if cracked, leaking, kinked, or deteriorated. Restores proper water flow to your machine.

This bleach dispenser box is the plastic reservoir that holds and directs liquid bleach into the washer during the wash cycle, helping the machine deliver bleach safely and evenly. Fits select GE top-load washers. What it does:

• Holds liquid bleach until the washer adds it at the correct time
• Directs bleach into the wash tub to prevent concentrated bleach contact with clothes
• Helps prevent leaks from the dispenser area when functioning properly
• Common symptom: cracked or warped box causing leaks or bleach not dispensing

• 1 bleach dispenser box

• Turn off power and shut off water supply before starting work
• Replace only with the exact part to ensure proper fit and sealing
• Inspect surrounding gaskets and hoses; replace if damaged to avoid leaks

Secures washer hoses to prevent leaks. Replace if loose, cracked, or causing water seepage. Verify fit with your washer's model number before ordering.

Connector assembly for washer stacking kits. Securely joins washer and dryer units when stacked. Replace if broken, cracked, or missing hardware.

This electronic board controls the washer's water heating functions and temperature regulation during wash cycles. Replace if the washer doesn't heat water, overheats, or displays temperature-related error codes.

Screw pack for washers. Secures internal components and panels. Replace if screws are stripped, missing, or damaged during appliance repair or maintenance.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.