Parts for Ge WBVH5200J0WW: 01 - Controls & Dispenser Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Replacement child lock button for washers. Installs on the control panel. Needed when the button is cracked, broken, missing, or no longer clicks properly.

This part is intended to replace the control board assembly on GE and other various brands of washers. The control board and washer assembly consist of the circuit board that controls the main functions and the dials that toggle those functions. The washer's control board acts as the central mainframe to the appliance. All main functions originate from the control board and allow the user to toggle between all the main settings. If a washer begins to lose some or all of the main functions, it's typically a sign of a control board issue. When the control board fails completely, the washer will cease all operations, and the board will need to be replaced. Beginning at the central control area, remove the faceplate or label area of the controls. It may be necessary to remove the trim before this is possible. Using a screwdriver, remove any anchor screws from the perimeter area of the control assembly. The circuit board will be directly on the rear face of the control assembly and is connected to a wiring harness. Remove the wiring harness and connect the new component. Place the assembly back into its intended housing but do not anchor it with screws until it's been tested to work properly.This part is compatible with GE and Kenmore appliances. It is a genuine OEM part sourced directly from General Electric.

Replacement mounting screw for washers. Secures internal components and panels. Order a new screw if yours is stripped, missing, or damaged.

Replacement mounting screw for washer pedestals. Secures pedestal to washer base. Order if original screw is stripped, missing, or damaged.

This rear cover protects the back of your washer's control panel and internal wiring from moisture and damage. It provides a barrier between the electronic components and the humid environment inside the washer. Replace it if it's cracked, warped, or missing, which could allow water to damage the control electronics.

Front top mounting bracket for your washer. Secures the top panel to the cabinet frame. Replace if cracked, bent, or missing to restore stability.

Replacement self-tapping screw for securing panels, brackets, and small components on washers. Needed when original fasteners are missing or damaged.

This control knob allows you to select different wash cycles on your washing machine. It connects to the cycle selector switch inside the control panel. Replace it if the knob is cracked, won't turn smoothly, or doesn't align properly with cycle markings.

Replace your washer's control panel touch pad when buttons are cracked, worn, or unresponsive. This component installs on the top control console.

Silver grey rinse button for washer control panel. Replaces broken, cracked, or missing buttons. Installs on front panel for cycle selection.

Spray hose for washers. Delivers water for rinsing cycles. Replace if cracked, leaking, kinked, or disconnected to restore proper water flow.

Secures the water inlet line to prevent movement and wear. Replace when worn or broken to stop chafing and reduce leak risk. Verify fit with your model.

Siphon pipe for washer drain air-break assembly. Prevents backflow and unintended siphoning. Replace if cracked, broken, or missing from detergent dispenser.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Replacement cap for washer softener and bleach dispenser. Seals dispenser opening to prevent spills and contamination. Needed when original cap is cracked or missing.

The dispenser drawer and handle is the pull-out tray on your washing machine where you add laundry detergent, fabric softener, and bleach before a wash cycle. It channels each product into the drum at the correct time during the wash. Replace this part if the drawer is cracked, broken, stuck, or if the handle has snapped off.

Hot water inlet hose for washers. Connects hot water supply to the machine. Replace if cracked, leaking, kinked, or worn to restore proper water flow.

Self-tapping screw for securing washer components and panels. Replace worn, stripped, or missing screws during repairs or reassembly of your machine.

This rubber gasket creates a watertight seal around water inlet connections in your washing machine. It prevents leaks and ensures proper water pressure for filling the tub during wash cycles. Replace this gasket if you notice water dripping from hose connections or if the washer takes too long to fill.

This gasket nozzle washer is a small rubber seal that fits at a spray/nozzle connection to help prevent leaks and ensure proper water flow. Replacing a worn gasket restores a secure seal and reduces dripping or pooling. What it does:

• Seals the connection at a spray nozzle or outlet to help stop leaks
• Maintains correct water flow through the nozzle for effective spraying
• Commonly replaces hardened, cracked, or flattened gaskets that allow dripping
• Helps eliminate minor water pooling or visible leaks near the nozzle area

• Turn off power and water supply to the appliance before servicing
• Remove the nozzle or fitting per the manufacturer's instructions; replace the old gasket with the new washer, ensuring it seats evenly
• Inspect mating surfaces for debris or damage before reinstalling

Stacking kit mounts your dryer securely on top of your washer to save floor space. Includes brackets and hardware. Replace if missing or damaged.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.