Parts for Amana AEP200VAW0: 01 - Cooktop Parts

White thermostat control knob for electric ranges. Replaces broken, cracked, or missing knobs. Installs on the control panel to adjust oven temperature.

This support is a replacement mounting bracket that stabilizes a specific appliance component and restores proper alignment. Replacing a worn or broken support helps stop excessive movement and prevents related wear on surrounding parts. What it does:

• Secures and stabilizes the related assembly to the cabinet or frame
• Prevents sagging, vibration, and misalignment that can cause noise or uneven operation
• Maintains correct spacing for linked components, reducing rubbing or wear
• Helps restore proper function when the original support is cracked, bent, or broken

• One support

• High-level replacement: typically fastener-mounted; inspect surrounding fasteners and mounting surfaces
• Use correct fasteners and torque per manufacturer guidance; replace any damaged hardware
• Disconnect power and follow all safety procedures before starting work

This replacement support is a mounting bracket that helps stabilize internal appliance components to reduce vibration and maintain proper alignment for reliable operation. What it does:

• Secures and supports internal parts to prevent excess movement and rattling
• Restores proper alignment that can reduce noise or intermittent contact
• Helps prevent undue wear on adjoining components caused by vibration
• Useful when original bracket is cracked, bent, or missing

• High-level fit: installs where the original support/bracket was mounted; verify orientation before tightening
• Use appropriate hand tools; avoid over-tightening fasteners to prevent damage
• Disconnect power (and water if applicable) before beginning any repair
• If fasteners or adjacent components are damaged, replace them for a secure installation

Oven won't turn off or stays on low heat? This temperature-sensing thermostat regulates oven heat and prevents overheating. Moderate DIY repair.

Replace a cracked, chipped, or damaged metal cooktop surface on your electric range. This main top installs over the heating elements and burner pans.

Factory replacement screw that secures appliance components and hardware. Use it to replace a missing, stripped, or corroded fastener to restore a tight, rattle-free fit and help prevent loosening or damage from vibration.

• Fastens brackets, panels, or internal parts at the original mounting points
• Replaces worn or missing hardware to correct loose or misaligned components
• Helps reduce vibration-related noise and movement
• Matches the original thread and length specified for the application

• Disconnect power; shut off water or gas if applicable before servicing
• Compare to the original for thread and length match before installation
• Start threads by hand to avoid cross-threading; tighten snugly—do not overtighten
• Reuse any original spacers/washers if present; replace if damaged

Drip pan installs under range burners to catch spills and grease. Replace if cracked, warped, corroded, or heavily stained for a clean cooktop.

Shallow metal drip pan installs below burner elements to catch grease and spills. Replace when discolored, rusted, warped, or damaged for a clean cooktop.

Protects the bulb from moisture and contact while diffusing light. Replace when cracked or missing to restore safe, even oven lighting. Confirm fit.

Fixes surface burner that won't heat or loses variable temperature control. Restores adjustable heat settings. DIY-friendly repair, 15-20 minutes.

Burner won't heat properly or stuck on high? This infinite switch restores adjustable heat control to your range surface element. Moderate DIY repair.

Burner not heating evenly or has hot spots? This 6-inch surface element coil restores consistent heat for simmering and boiling. Simple plug-in fix.

Range burner not heating or heating unevenly? This 8-inch surface element restores proper cooking heat. Easy DIY installation in under 15 minutes.

This machine screw is used across appliances to secure brackets, covers, and internal components. Replacing a missing or stripped fastener helps keep parts aligned and tight, reducing vibration and preventing loose or shifting assemblies.

• Provides machine-thread fastening for panels, brackets, and internal parts
• Helps eliminate rattling, vibration, and loose fits
• Restores proper attachment when the original screw is stripped, missing, or corroded
• Used wherever an 8-32 screw is specified in the service manual or parts list

• Disconnect power to the appliance; turn off gas/water if applicable
• Match the screw to the original location to confirm size and thread
• Start threads by hand to avoid cross-threading; use the correct driver
• Tighten snugly—do not overtighten to prevent stripping or cracking

Replace your range indicator light when dim, cracked, or not illuminating. Restores visible status for active functions and cycle progress. Verify fit.

Fix a burner that won't heat or has a charred connection. Burner receptacle replacement requires wire cutting, stripping, and splicing—about 30 minutes.

This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.

• Fastens panels, brackets, covers, or internal parts to the chassis or frame
• Helps maintain alignment and support, reducing rattle, vibration, or looseness
• Replaces missing or damaged screws that have backed out, broken, or stripped
• Restores secure mounting after service when original hardware is lost

• Disconnect power; shut off water or gas supplies before servicing
• Use the correct driver; start threads by hand to avoid cross-threading
• Match length and thread to the original location; do not substitute with longer hardware
• Tighten snugly; do not overtighten into plastic or thin metal

Secures the thermostat sensor bulb in place on your range. Replace if broken or corroded to restore accurate temperature control. Verify fit by model.