Parts for Dacor ER30DSCHNG: Cooktop Parts

This dual burner base assembly replaces the damaged or worn support that holds two cooktop burners in place, restoring proper alignment and stable burner seating for safer, more consistent heating. What it does

• Secures and centers two burner elements so they sit flat and stable
• Prevents burner wobble and misalignment that can cause uneven heating
• Provides the structural support for burners and related mounting hardware
• Works with original cooktop components to maintain proper burner positioning

• Disconnect power (and gas if applicable) to the appliance before starting work.
• Remove the cooktop or control panel per the manufacturer's service instructions to access the burner base.
• Inspect nearby components (burner caps, elements, clips) and replace any damaged parts for best results.

If your gas burners won't light or flame goes out repeatedly, this spark module may need replacement. Controls ignition and re-ignition. DIY repair.

Factory wafer-head Phillips screw (#8 x 3/8 in) secures panels, brackets, and covers. Replace missing, stripped, or damaged screws for proper alignment.

This service assembly secures the injector in the appliance's dispenser area so detergent or liquid additives are directed properly during the cycle. Replacing a damaged holder restores correct injector positioning and helps prevent dispenser issues. What it does

• Holds and aligns the liquid/detergent injector in the dispenser assembly
• Ensures proper flow path so additives are delivered into the wash
• Helps stop injector movement that can cause leaking or misdirected detergent
• Commonly replaced when the dispenser area is cracked, loose, or not dispensing correctly

• One injector holder service assembly

• Disconnect power and turn off water supply before starting any repair
• Remove the dispenser or access panel to reach the injector area
• Inspect nearby seals and clips; replace if damaged to ensure a watertight fit

Seals the dual burner assembly to the cooktop surface, preventing spills and ensuring proper support. Replace when worn to restore a snug fit and reliable burner operation. Verify fit with your model number.

This service pack includes the burner cap and burner ring used on compatible Samsung gas cooktops and ranges. It restores proper gas flow and stable flame by replacing worn or damaged burner top components. What it does

• Replaces the visible burner cap and surrounding burner ring for one cooktop burner
• Helps restore even flame distribution and consistent heating on the affected burner
• Can resolve ignition issues caused by warped or corroded burner tops
• Useful when the burner shows yellow tipping, uneven flame, or poor simmer performance

• One burner cap and one burner ring service pack

• Turn off gas supply and disconnect power before servicing the appliance
• Remove grates and existing burner components, then fit new ring and cap in correct orientation
• Inspect ignition electrode and gas orifice while servicing; clean or replace if needed

This service pack includes the burner cap and burner ring used on compatible Samsung gas cooktops and ranges. It restores proper gas flow and stable flame by replacing worn or damaged burner top components. What it does

• Replaces the visible burner cap and surrounding burner ring for one cooktop burner
• Helps restore even flame distribution and consistent heating on the affected burner
• Can resolve ignition issues caused by warped or corroded burner tops
• Useful when the burner shows yellow tipping, uneven flame, or poor simmer performance

• One burner cap and one burner ring service pack

• Turn off gas supply and disconnect power before servicing the appliance
• Remove grates and existing burner components, then fit new ring and cap in correct orientation
• Inspect ignition electrode and gas orifice while servicing; clean or replace if needed

Fixes igniters that spark continuously on low settings. This burner base assembly includes O-ring for proper airflow. Simple 2-screw installation.

This burner ring cap base provides the support and alignment for a gas cooktop burner cap, helping direct the flame for consistent heating and safe operation. It replaces damaged or warped bases that prevent proper burner seating. What it does:

• Supports and centers the burner cap so the flame is properly directed
• Restores even heating and stable flame pattern when the original base is cracked or warped
• Helps maintain correct burner-to-cap spacing for reliable ignition and simmer control
• Prevents burner cap wobble that can cause uneven cooking or noisy flames

• Turn off the gas supply and power to the appliance before starting any work
• Remove burner cap and grate to access the base; ensure all surfaces are clean and dry before installing
• Fit the new base into the burner assembly and ensure the cap seats evenly and securely

This burner ring cap base provides the support and alignment for a gas cooktop burner cap, helping direct the flame for consistent heating and safe operation. It replaces damaged or warped bases that prevent proper burner seating. What it does:

• Supports and centers the burner cap so the flame is properly directed
• Restores even heating and stable flame pattern when the original base is cracked or warped
• Helps maintain correct burner-to-cap spacing for reliable ignition and simmer control
• Prevents burner cap wobble that can cause uneven cooking or noisy flames

• Turn off the gas supply and power to the appliance before starting any work
• Remove burner cap and grate to access the base; ensure all surfaces are clean and dry before installing
• Fit the new base into the burner assembly and ensure the cap seats evenly and securely

This burner ring cap base provides the support and alignment for a gas cooktop burner cap, helping direct the flame for consistent heating and safe operation. It replaces damaged or warped bases that prevent proper burner seating. What it does:

• Supports and centers the burner cap so the flame is properly directed
• Restores even heating and stable flame pattern when the original base is cracked or warped
• Helps maintain correct burner-to-cap spacing for reliable ignition and simmer control
• Prevents burner cap wobble that can cause uneven cooking or noisy flames

• Turn off the gas supply and power to the appliance before starting any work
• Remove burner cap and grate to access the base; ensure all surfaces are clean and dry before installing
• Fit the new base into the burner assembly and ensure the cap seats evenly and securely

Replacement M22x1 thread ring for dual-assembly components in ranges. Secures and retains mating parts with proper alignment. Replace if stripped, worn, or damaged.

Controls and protects LED lighting and display circuitry. Replace if LEDs flicker, dim, or fail completely. Verify fit with your model number.

Nylon support bracket that secures the PCB control board in your dishwasher. Replace if cracked, broken, or missing to properly mount the circuit board.