Parts for Ge P2S975DEP2WW: 02 - Cooktop Parts

Natural gas orifice spud for gas cooktops and ranges. Directs gas from valve to burner. Replace if cracked, clogged, or missing to restore flame shape.

Burner orifice spud for gas ranges and cooktops. Installs in the burner assembly to regulate gas flow. Replace if cracked, worn, or missing.

Burner orifice spud for gas cooktops and ranges. Installs in the burner assembly to control gas flow. Replace if damaged, clogged, or missing.

This LP gas orifice spud meters propane flow to your range burner. Replace if the original is clogged, damaged, or missing to restore proper gas delivery.

Replacement fastener nut for gas ranges and cooktops. Secures panels and internal components. Needed when original nut is missing, stripped, or worn.

Retaining ring secures range components in place. Replace if loose, damaged, or missing to prevent parts from shifting during operation. Confirm fit with your model number before ordering.

Replace your range orifice spud if the original is cracked, damaged, or missing. This component installs in the burner assembly to regulate gas flow.

Replacement backsplash kit (white) for affected appliances.

Rubber foot that attaches to the bottom of cooktop grates. Replace if cracked, worn, missing, or loose to prevent grates from sliding and scratching.

This replacement main top restores the cooktop surface and appearance of your range. A factory-style main top provides a clean, finished look and supports burners and components for safe operation. What it does

• Replaces a cracked, dented, or discolored cooktop surface to restore proper fit and appearance
• Provides a stable mounting surface for burners, burners bowls, and trim pieces
• Helps prevent heat and grease from reaching internal components through damaged areas
• Reduces rattling or misalignment caused by a warped or bent top

• Turn off and disconnect power (and gas if applicable) before starting work
• Remove burner grates, burners, and control panel components as needed to access the top
• Handle carefully to avoid scratching the finished surface; two-person lift recommended for alignment
• Use existing hardware unless new fasteners are explicitly included with your order

Replacement small surface burner for gas ranges and cooktops. Installs on stovetop to provide heat for smaller pots. Replace if damaged, discolored, or missing.

The Medium Surface Burner is an OEM part for GE ranges and cooktops. This burner is essential for a wide range of cooking tasks, from simmering sauces to sautéing vegetables. The medium surface burner ensures even heat distribution and efficient fuel consumption, contributing to the overall cooking performance of your appliance.

Causes of a bad Medium Surface Burner can range from clogged burner ports, which impede gas flow and affect flame consistency, to wear and tear on the igniter or the burner assembly that prevents proper operation.

Symptoms of a malfunctioning Medium Surface Burner include:

• Inconsistent flame size or failure to ignite
• Uneven heating or hot spots on the cookware
• Visible damage or corrosion on the burner itself

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Burner base holds and secures the gas burner assembly on your cooktop. Replace if cracked, warped, or corroded to restore proper burner seating.

Heavy-duty cast grate assembly for gas range cooktops. Replaces cracked, warped, or missing grates to restore a stable, level cooking surface.

Cast iron burner grate assembly for ranges. Sits on top of cooktop to support pots and pans. Replace if cracked, chipped, or broken. Direct fit.

Cast iron burner grate for gas range cooktops. Replaces cracked, chipped, or worn grates. Supports cookware over burner flame during cooking.

Replacement mounting screw for gas cooktops and ranges. Secures cooktop components in place. Order a new screw if yours is stripped, missing, or damaged.

Specs: 8-32 MCH PNT15

Primary gas burner head that directs and distributes flame on your cooktop. Replaces damaged, corroded, or stained burner heads to restore proper function.

Fix a gas burner that won't light or keeps clicking constantly. This spark electrode ignites your burner. Easy 15-minute DIY repair for most ranges.

The Top Burner Spark Electrode is an OEM replacement part for GE brand appliances. Compatible with select GE gas ranges, this spark electrode ensures a reliable ignition for your burners. It features a white ceramic base and a metal electrode tip.

Symptoms of a bad igniter:

• Burners not lighting
• Igniter sparking erratically

The causes of a bad part can include physical damage or wear and tear over time.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

Burner base mounts beneath the burner cap on gas range cooktops. Replace if cracked, corroded, or damaged to restore proper burner alignment and appearance.

Secures the igniter in its mounting bracket on gas ranges and cooktops. Replace if spring is missing, broken, or worn to restore proper igniter positioning.

This small metal clip secures the surface burner igniter in place on a gas range cooktop. It ensures the igniter stays properly positioned near the burner so it can reliably spark and light the gas. Replace this clip if your igniter is loose, misaligned, or falls out of position, which can cause inconsistent ignition or failure to light.

Secures the ignition electrode on gas range burners. Replace if burners won't spark, igniter clicks continuously, or clip is corroded or loose. Confirm fit with your model number.

Burner tube assembly for gas ranges. Mounts beneath the cooktop to deliver gas from the valve to the burner head. Replace if cracked, warped, or corroded.

Burner orifice injector for gas ranges and cooktops. Controls gas flow to burner. Replace if cracked, clogged, or missing for proper flame control.

Replacement burner cap for gas cooktops. Covers the burner head to protect internal parts and shape the flame. Replace if cracked, chipped, or missing.

Replacement burner cap for 18K high-output burners. Sits atop the burner head to shape and distribute the flame. Replace if cracked, chipped, or worn.

Replaces chipped, cracked, or missing burner cap on your gas range cooktop. This grey cap sits atop the burner base to direct and shape the flame properly.

Burner cap sits atop the burner base on gas ranges and cooktops. Replace if cracked, chipped, discolored, or missing to restore a clean appearance.

Medium. Color: Grey. It measures about 3 inches in diameter.

Medium burner cap for gas cooktops and ranges. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or worn from use.

Large. Color: Grey. It measures about 3-1/2 inches in diameter.

Replacement burner cap for gas cooktops and ranges. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or worn.

This small cooktop bracket secures designated components beneath the cooktop surface, keeping them properly positioned and stable. Replace a damaged or missing bracket to restore alignment and reduce movement or rattling during use.

• Provides mounting support for specific under-top components, per model design
• Helps maintain proper alignment and stability of cooktop parts
• Replace when visibly bent, cracked, or corroded

• Disconnect power; for gas models, also shut off gas and allow the unit to cool
• Remove surface components as required (grates/caps/heads for gas; elements/panels for electric) to access under the top
• Lift or remove the cooktop as directed in your model's service information and secure the new bracket with existing hardware
• Reassemble, verify alignment, and for gas units check for leaks if any gas connections were disturbed

This metal bracket mounts beneath a cooktop surface burner and holds the orifice and burner base in position. It ensures proper alignment of the burner assembly for safe and efficient gas flow. Replace this bracket if it is bent, corroded, or broken, which can cause the burner to sit unevenly or not ignite properly.

Secures the cooktop surface to the range chassis for stable alignment. Replace if bracket is bent, broken, or missing to eliminate looseness and gaps.

A replacement rubber grommet that cushions and seats components to reduce vibration and protect wiring or shafts from wear. Restores proper fit and helps reduce noise and abrasion from loose or rubbing parts. What it does:

• Cushions and isolates parts to reduce vibration and rattling
• Protects wiring, hoses or shafts from chafing and wear
• Holds components securely in place to prevent misalignment
• Helps maintain seals and proper component spacing

• Disconnect power before servicing the appliance.
• Remove any panels or components blocking access; replace the grommet in the same orientation.
• Inspect surrounding parts (wires, hoses, mounting posts) for wear and replace if damaged.
• Do not force or modify the grommet; use the correct size for proper fit.