Parts for Kenmore 790.33033100 (79033033100, 790 33033100): Cooktop Parts

Warmer

Two per package.

Two per package.

Burner cap for gas cooktops. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, discolored, or missing for proper burner operation.

Replace your cooktop's burner cap if it's cracked, chipped, or missing. This cap sits on top of the burner head to distribute heat evenly during cooking.

Seals around cooktop burner to prevent spills from entering burner housing and centers burner for even heating. Replace when hardened or cracked.

Replacement gasket that seals around surface burners to prevent spills from entering the cooktop cavity. Replace when hardened, cracked, or torn. Confirm fit with your model number before ordering.

Seals the gap between burner and cooktop to prevent spills from leaking underneath. Replace when seal becomes discolored, cracked, or loses flexibility.

Seals between burner and cooktop to prevent spills and air leaks. Replace when cracked, hardened, or crumbling. Confirm fit with your model number.

Replace your cooktop's control knob if cracked, broken, or missing. This knob attaches to the burner control valve shaft for temperature adjustment.

Control knob for cooktop burner adjustment. Installs on the front control panel. Replace if cracked, broken, loose, or missing for proper appearance.

Indicator light signals power and active burners on your cooktop control panel. Replace when dim, cracked, or failed. Verify fit with your model number.

Mounting spring that secures electric cooktop elements in place. Replace if spring is broken, bent, or missing to properly hold heating element assembly.

Burner won't turn off or element light stays on? This range burner control switch regulates temperature and power. Moderate DIY repair, 30-60 minutes.

Plastic spacer that positions and supports the heating element in your range cooktop. Replace if cracked, broken, or missing to properly secure the element.

This truss-head machine screw secures a switch to its mounting bracket or panel. Replacing a worn or missing screw restores a solid, aligned switch fit for reliable operation.

• Fastens the switch body to a bracket or chassis panel
• Helps keep the switch aligned for consistent actuation
• Replaces stripped, corroded, or missing mounting hardware
• Common symptoms: loose or wobbly switch, misalignment, rattling or vibration around the switch area

• Disconnect power to the appliance before servicing
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Verify thread size and length match the original hardware
• If multiple screws secure the switch, replace them in a consistent pattern to maintain alignment

Strain relief retainer secures electrical cables at the cooktop connection point. Replace if cracked, broken, or missing to protect wiring integrity.

This bracket kit secures your cooktop to the countertop during installation, providing stable mounting support. The brackets prevent movement and ensure proper alignment with the cutout opening. Install these brackets if your cooktop shifts, sits unevenly, or needs to be properly secured to meet safety requirements.

Replacement drip pan that sits beneath cooktop burners to catch spills and debris. Needed when original pan is cracked, rusted, warped, or discolored.

This black burner skirt fits around a 5K simmer burner ring to restore proper appearance and support the cooktop surface. Replaces cracked or damaged skirts to keep the burner area sealed and looking finished. What it does:

• Provides the decorative and protective trim around a 5K (5000 BTU) simmer burner
• Helps keep spills and debris from entering the burner cavity
• Restores even contact and alignment for the burner assembly
• Commonly replaced when the skirt is cracked, warped, or missing

• One black burner skirt (5K)

• Turn off and disconnect power and gas supply and allow all surfaces to cool before servicing
• Remove burner caps and grates per your model's service instructions to access the skirt
• Handle carefully to avoid bending or cracking; hand tools usually sufficient

A surface burner skirt that covers and protects the heating element on your electric range cooktop. This metal component directs heat upward while shielding the element from spills and debris. Replace it when the skirt is warped, discolored from overheating, or has cracks that affect heat distribution.

This printed Use and Care Guide is the manufacturer's owner manual booklet that explains safe operation, basic care and routine maintenance for your appliance. Keep it with the appliance for quick reference. What it does:

• Describes normal operation and control functions in plain language.
• Lists routine cleaning and care steps to help prevent common issues.
• Summarizes safety warnings and precautions to reduce risk during use and maintenance.
• Provides basic troubleshooting tips to identify common symptoms or user-serviceable steps.

• No tools required; store the booklet near the appliance or in a safe place for future reference.
• Read all safety and warning sections before operating the appliance.
• Keep guide away from moisture and heat to preserve legibility.

Replacement 10-24 x 3/8 machine screw secures panels, brackets, and trim in ranges and ovens. Replace missing, stripped, or damaged screws.

Replacement #8 x 0.500 inch screw for securing panels, trim, and brackets in appliances. Needed when original fasteners are stripped, lost, or missing.

Secures the ignitor assembly to your gas cooktop burner base. Replace if screw head is stripped, threads damaged, or screw is missing after disassembly.