Parts for Frigidaire PRFC2383AF3: Cooling System Parts

Includes service line.

Connects your refrigerator to the wall outlet to supply electricity. Replace if the original cord is frayed, damaged, or has exposed wires from wear or moving.

The Defrost Heater Assembly is an OEM part for Frigidaire refrigerators. It is responsible for preventing excessive frost buildup on the evaporator coils by heating them during the defrost cycle.

A bad defrost heater assembly can be caused by e

Connects dispenser controls and components in the refrigerator door. Replace if the wiring is damaged, frayed, or causing intermittent dispenser operation.

The Thermistor Kit is an OEM part for Frigidaire refrigerators. Consisting of a thermistor temperature sensor and mounting bracket, this kit plays a key role in refrigeration system operation. Strategically positioned inside the unit, the sensor contin

This base assembly replaces the refrigerator's lower cabinet base to support internal components and help manage drainage and airflow. Restores cabinet stability and helps prevent leaks or excessive vibration when installed correctly. What it does:

• Provides a stable mounting platform for compressor and other under-cabinet components
• Channels and contains condensate/drain water away from cabinet interior
• Helps reduce vibration and noise caused by loose or damaged base supports
• A damaged or cracked base can lead to water leaks, uneven cabinet alignment, or unusual noises

• Disconnect power and empty/remove food and shelves before starting work
• Use proper lifting support; base replacement may require tilting or lifting the appliance
• Retain and reuse original mounting hardware unless replacements are specified by the manufacturer

Secures the compressor to the mounting bracket in your refrigerator. Replace if washer is missing, cracked, or worn to restore proper support.

Clip spring for refrigerator shelves and compartments. Replaces broken, missing, or worn clips that secure parts in place. Direct fit replacement.

Replacement defrost drain pan that collects and channels meltwater from the automatic defrost cycle. Replace if cracked, warped, or missing to prevent leaks.

Refrigerator not cooling or running constantly? This compressor restores proper cooling performance. Professional repair recommended due to complexity.

Refrigerator not cooling or running constantly? This inverter board controls compressor speed and restores proper cooling performance in your fridge.

Rubber grommet that cushions and protects door components in your refrigerator. Replace if cracked, worn, or missing to restore proper door function.

This #8-32 x 3/8 screw secures appliance panels, brackets, and assemblies. Replace a missing or stripped fastener to keep parts tight and aligned, reduce vibration, and restore proper fit in compatible refrigerators and freezers.

• Machine-thread

Secures and protects wiring harness from strain damage. Replace if cracked, broken, or wires show wear. Verify fit with your model number listed.

Factory fastener that secures panels, brackets, and internal components. Replace missing, stripped, or corroded screws to restore tight fit and eliminate rattling.

Replacement mounting screw secures panels, brackets, and trim inside refrigerators and freezers. Restores factory assembly when original fasteners are missing.

Positions the condenser fan and motor in the rear machine compartment. Replace if cracked, warped, or damaged to restore proper airflow direction.

Fix a refrigerator that's not cooling properly or making grinding noises with this evaporator fan motor. Moderate DIY repair takes 30-45 minutes.

Refrigerator not cooling properly? A damaged condenser fan blade prevents airflow over the condenser coils. Quick DIY fix—simply push into place.

Foam seal tape creates airtight barriers around refrigerator components. Replace when worn, compressed, or damaged to restore proper sealing and efficiency.

Secures the evaporator or condenser fan shroud to the refrigerator cabinet. Replace this mounting screw if stripped, missing, or broken during repair.

Supports refrigerator crisper or bin drawers for smooth gliding. Replace when drawers stick or bind. Confirm fit with your model number listed.

Metal rivet fastener permanently secures panels, brackets, and internal components in refrigerators. Replace damaged, missing, or worn rivets to restore fit.

Channels defrost water from the evaporator to the rear drain pan. Replace this tube if it's cracked, clogged, missing, or has become brittle over time.

This rigid water fill tube directs water from the refrigerator supply to the ice maker, ensuring a steady fill for ice production. Replaces a cracked or clogged fill tube to restore proper ice-maker filling and reduce leaks. What it does:

• Guides water from the supply line to the ice maker's fill cup for normal ice production
• Prevents leaks and water spray when intact and properly seated
• Helps stop slow fills or no-fill symptoms caused by damaged or kinked tubing
• Works with the ice maker assembly and water inlet valve to deliver measured fills

• Designed for refrigerator ice-maker systems; handle with care to avoid kinks
• Turn off water supply and power to the appliance before removing or installing
• Make sure fittings and clamps are secure and sealed to prevent leaks

Positions and secures condenser tubing to maintain proper spacing. Replace if worn, broken, or missing to prevent vibration, rattling, and tube damage.

Replacement mounting screw for refrigerators, ovens, ranges, and cooktops. Secures interior panels, components, and trim. Needed when original is stripped, missing, or damaged during repair.

Secures refrigerator grille or trim to cabinet, preventing rattles and gaps. Replace when broken or missing to restore proper panel alignment. Verify fit with your model number before ordering.

Replacement mounting screw for refrigerators and freezers. Secures shelves, handles, panels, and brackets. Replace missing, stripped, or rusted screws.