Craftsman Edger Parts

The engine pulley is a wheel that guides or drives the belt or belts within the engine compartment. The pulley has groves to help keep the belt secured in place while it spins around the component. The engine pulley belts are typically composed of high-quality, heat-resistant metal materials to withstand high temperatures and long periods of use. At times, the engine pulley can wear out, break, or become otherwise ineffective at performing its function. When this happens, a replacement engine pulley is required.When trying to determine if the engine pulley is faulty, check for belts that continually need to be adjusted or tightened or a pulley that won't secure belts at all. Be sure to have the appropriate tools for the repair on hand. Wear gloves for protection and ensure the motor is completely cooled before starting.This is an engine pulley replacement part that is an authentic OEM piece. It is sourced from the manufacturer and sold as an individual unit. The engine pulley is compatible with various engines found in edgers, trimmers, and snow blowers made by MTD, Yard-Man, Troy-Bilt, Cub Cadet, and Yard Machine brands.

Replace your chipper shredder's V-belt when you notice slipping, cracking, or reduced performance. Ensures proper power transfer to cutting blades. Verify fit using your model number before ordering.

This genuine Husqvarna muffler for string trimmers and edgers is a necessary component for reducing noise from the equipment. While these machines might work without mufflers, they would be much louder. The muffler also prevents sparks from coming through and starting fires. This is particularly important when working with grass, leaves, and other dry debris.If the muffler is clogged, cracked, or broken, the engine on the equipment might not perform as it should. Clogs can occur over time due to the use and buildup of debris. Cracks and breakage are a normal part of wear and tear and would be easy to find during routine maintenance. Inspect for rust, cracks, breaks, and damage.Removal and replacement is a simple process using a screwdriver to remove the engine cover. Set the cover aside. Next, remove the bolts holding the old muffler in place. Remove the old muffler and discard. Wipe down the area while the muffler is off the equipment. This will prevent debris from interfering with the installation. Install the new muffler with the bolts included. Tighten the bolts but do not overtighten. Reinstall the engine cover and tighten the bolts. This muffler is compatible with Husqvarna trimmers. It is sold individually and comes with bolts.

Replacement mounting screw for chainsaws and outdoor power equipment. Secures components and covers. Replace if stripped, missing, or damaged during repair.

This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.

This is the gearbox assembly for a string trimmer that transfers rotational power from the drive shaft to the trimmer head. It contains internal gears and bearings that allow the cutting head to spin at the correct speed. Replace this assembly if the trimmer head wobbles excessively, makes grinding noises, or fails to spin even though the engine is running.

If your edger won't start or shut off, the on/off switch may have failed. This switch assembly controls engine operation and is straightforward to replace.

Reversible slide shoe for edgers. Installs on the base to protect and guide the unit. Replace when cracked, worn through, or damaged on both sides.

This gasket kit features replacement gaskets for use in a range of gas-powered handheld lawn and garden machines. The kit includes a range of O-rings, seals, and gaskets used as a means to provide tight seals between elements of the engine to prevent leaks from air, fuel, oil, and so forth. Even durable gaskets such as those found in engines will start to wear down over time. They can start to crack and break, and sometimes they will shrink. When this happens, they no longer provide a tight seal and will need to be replaced. It is recommended that the gaskets and seals are replaced whenever the owner is servicing their small engine. This will ensure a proper seal when the engine is reassembled. This gasket kit has genuine OEM parts to ensure a proper fit and a tight seal. The kit is sold individually and works with many models of string trimmer and edger. Compatible brands include Craftsman, Husqvarna, Weed Eater, and Poulan.

This is a genuine replacement OEM throttle control cable. The throttle control cable is comprised of an internal wire that slides through the external housing. Force is transferred from the accelerator pedal to the control linkage mounted to the throttle body from this sliding movement. If constant speed is not being maintained from the cruise control or delays starting, stopping, or jerking, then it may be time to replace the throttle control. To replace the throttle control a pair of pliers is needed. Remove the cable housing using pliers. The housings will swivel off the base and slide down the cable. Next, thread the cable wire through the housing. Locate the wire base on the back of the engine and run the cable through the throttle base and throttle arm. With the throttle all the way down, slide the cable through the housing and into the handle unit to attach it to the throttle handle. Pull the cable with a pair of pliers to make it tight and turn the lock screw. Replace the throttle to test the tension. If the mower, edger, or trimmer is running too high then loosen the cable.This throttle control works with lawn mowers, edgers, and trimmers. This is an OEM part sourced directly from the manufacturer and sold individually.

Upper handle for edgers and gas line trimmers. Mounts to the main frame for user control during operation. Replace if cracked, broken, or damaged.

This drive pulley is a genuine MTD part, sold individually. This drive pulley can be used as a replacement part in a snowblower or an edger. This part is used in conjunction with the drive belt to move the appliance.The drive pulley in a snowblower or an edger might have to be ordered as a complete replacement part in a drive pulley that can no longer generate rotation in the wheels of the appliance. This could occur if the drive pulley has suffered damage from general wear and tear with long-term use or as the result of a collision with a hard object such as a rock or a curb.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This drive pulley is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Montgomery Wards, Yard Man, and MasterCut.

Engine pulley for gas line trimmers and wheeled trimmers. Mounts to engine shaft to drive belts. Replace if cracked, worn grooves, or missing.

This part is a throttle control box assembly. The throttle controls the amount of air or fuel that enters the engine and also controls the speed of the engine. This assembly includes a throttle control knob that allows the user to control the throttle and the speed of the outdoor power equipment machine.A new throttle control box may be needed if any part of the assembly is cracked, broken, or damaged in any way. It's important to remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine MTD throttle control box assembly and is an OEM part sourced directly from the manufacturer and it is sold individually. This specific throttle control box assembly is compatible with edgers and lawn tractors that are manufactured by MTD, Yard Man, Yard Machines, and Cub Cadet.

Muffler spark arrestor screen that installs inside the exhaust system. Replace if cracked, clogged with carbon buildup, or missing for safe operation.