Need Help?
Call or text
The Frigidaire PureSource Plus WFCB Refrigerator Water Filter is an OEM part for Frigidaire refrigerators. This water filter is specifically engineered to reduce impurities and contaminants in your drinking water and ice, including chlorine taste and odor, lead, cysts, and particulates.
Regular replacement of the water filter is recommended to maintain the best water quality and flow rate. Over time, the filter can become clogged with particles and contaminants, which can reduce its effectiveness and potentially affect the taste and odor of your water.
Symptoms of a filter that needs replacement include:
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Replaced filter Read more
This is an oil filter designed to fit a variety of small, gasoline-powered motors used primarily on lawn equipment. This genuine OEM replacement filter removes contaminants that otherwise would wear down the internal working parts of the engine. While the filter works very well, it should be replaced annually as a part of regular maintenance. Depending on use, the filter may need to be replaced more often. When replacing the oil filter, the crankcase oil must be drained and safely discarded as well. To remove oil from the gasoline engine, start the engine and let it run for a couple of minutes. This circulates the oil and heats the internal engine parts so oil is better able to drain. Next, remove the drain plug located on the bottom of the oil pan and collect the oil. Remember to dispose of the oil safely where it cannot contaminate streams or aquifers. Once the oil has been removed, remove the old filter and discard it properly. The new filter should only be hand-tightened in place as using a wrench may cause the filter gasket to seal to the engine block. This filter will fit Yard Machine mower engines and MTD equipment.
Installing a brand-new air filter keeps the engine in top running condition. When the machine is in operation, the vacuumed air goes through the air filter. Any dirt or dust is left in the filter media. Over time, the filter will become dirty and can no longer provide the same filtering efficiency as before. If left ignored, the tiny particles could clog the engine and the carburetor. You may experience misfires and no engine start-up. An air filter replacement is cheap and easy to do. Simply remove the air cleaner cover and take out the dirty filter. Insert the new filter into the housing. This replacement will take less than 5 minutes. A screwdriver will be needed. The MTD 951-10298 Air Cleaner Kit is a genuine air filter from MTD. Each kit comes with one paper filter and one foam filter. The foam filter can be cleaned with water and detergent. The paper filter, however, needs replacement at least once a year. This air filter kit is compatible with Cub Cadet, PowerMore, and Troy-Bilt. It can also work with other garden equipment like wheel string trimmers, chipper-shredder vacuums, and log splitters.
This is an air cleaner housing that works with many types of lawn and garden equipment. The housing fits over the air filter, which is the component that prevents dirt and debris from reaching the engine where it can cause performance issues. The housing sits on top of the filter and keeps it protected from damage. It also plays a part in ensuring that dust and dirt aren't sent out into the air.Wear and tear can cause the air filter housing to break or become damaged. Impact to the air cleaner housing can also lead to cracks, holes, or a weakened housing that will need to be replaced. The replacement process will require a pair of work gloves and a screwdriver. The air cleaner housing will attach through screws so remove those first. Take off the old housing and install the new one by screwing it on.This air cleaner housing is an authentic OEM replacement part directly sourced from the manufacturer. It is sold individually. The air cleaner housing is compatible with lawnmowers, log splitters, edgers, tillers, string trimmers, and chipper shredders created by Yard Man, Cub Cadet, Craftsman, and MTD.
This replacement part air cleaner is an OEM part for use in small engines used in outdoor equipment, such as tillers and dethatchers. The air cleaner is responsible for ensuring that clean air is brought into the engine to provide optimal performance. It is a good idea to inspect the air cleaner assembly regularly to ensure that there is no damage or cracks that could allow dirt and debris to get into the engine. If there are any issues, get a replacement before operating the engine again. This will ensure that there is no additional dirt getting into the engine. The genuine OEM air cleaner is a quality item that comes from the manufacturer. It is sold individually. It can work with tillers and other machines from top brands like MTD, Craftsman, and Yard Machines.
This brand-new, original MTD air filter attaches inside the air filter housing of a string trimmer to block debris and dirt. Tiny particles can accumulate inside the machine and cause carburetor and engine problems. String trimmers come with pre-installed air filters, but when it becomes too dirty, it will not be able to filter the tiny particles efficiently. It may also cause overheating issues. When there's too much dirt accumulation inside the string trimmer, it may disrupt the carburetor and engine performance. Some symptoms include carburetor and engine spit back and rough idling. In some scenarios, it will lead to complete machine failure. Replacing the air filter is easy, only requires a screwdriver, and will take less than 10 minutes. Open the air filter cover and remove the dirty filter. Put the replacement filter into the air cleaner housing. Make sure it is aligned. Then, close the air cleaner cover. This genuine MTD air filter will only work with string trimmer models from MTD, Bolens, Yard Machines, Craftsman, and Cub Cadet. This air filter is sold individually.
As an air filter for trimmers used in the yard, this component helps keep the engine running smoothly when doing work. A clean air filter supplies the engine with clean air for the best performance. A visual inspection of the filter will offer insight into whether a replacement is needed. Maintaining the air filter will ensure it lasts longer and keeps debris from clogging the carburetor of the trimmer. If the original air filter has obstructions or large amounts of debris, it’s best to replace it. Tears in the filter also indicate a replacement is required to prevent any damage to the engine. This will entail removing the old air filter and placing a new one where it was. Opening the engine cover will give you access to the area where the air filter is housed. This replacement air filter is an OEM product that is directly from the manufacturer. It comes as an individual item and is designed for use with various Craftsman, Yard-Man, Cub Cadet, Bolens, Troy-Bilt, MTD, Murray, and Yard Machines trimmers. A screwdriver may be required to install the new air filter into the equipment.
The Fuel Pick Up Assembly is an OEM part for Husqvarna outdoor power equipment, including chainsaws, trimmers, and blowers. This assembly is responsible for drawing fuel from the tank to the carburetor, ensuring the engine receives a steady supply of fuel for optimal performance.
Over time, the fuel pick up assembly can become clogged or damaged due to debris in the fuel, exposure to ethanol-blended gasoline, or regular wear and tear. If the fuel pick up assembly is compromised, it can lead to poor engine performance or difficulty starting the equipment.
Symptoms of a bad fuel pick up assembly include:
This OEM Husqvarna part ensures proper fuel delivery and compatibility with your outdoor power equipment.
Usually ships within 4 - 14 days
This is an air filter that is intended for use with chainsaws. An air filter is designed to filter the air to remove any dust, debris, or other harmful contaminants that could harm the engine. A new air filter will be needed with regular use, and should generally be replaced as a part of normal care and maintenance on the chainsaw. Over time, the air filter will become clogged, which will inhibit airflow through the machine. At this time, it is essential to change out the air filter to ensure proper operation. Never perform care and maintenance on an outdoor power equipment machine that is powered on. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. This air filter is a genuine OEM Husqvarna part. It is sold individually. This specific air filter is compatible with chainsaws that are manufactured by the Husqvarna and the Craftsman brands.
This air filter cleans air entering the carburetor. As air passes through the filter, harmful contaminants are removed, making it an important part for keeping an edger or tiller in good working condition. Regular air filter replacement will improve fuel efficiency and prolong engine life. This air filter is made from a lightweight but durable foam material, making it easy to replace. Replace the air filter in an edger or tiller when it is worn or dirty. To replace an air filter, start by removing the spark plug ignition wire and then opening the cover that protects the air filter itself. Then, remove the old air filter and install the replacement. Once the new filter is in place, always ensure that the air filter cover is securely closed before reattaching the spark plug ignition wire. As an authentic OEM replacement part, this air filter can be used on multiple different Troy-Bilt edger models and Craftsman tiller models. Please note that these air filters are sold individually.
An air filter blocks tiny particles from entering and harming the engine. Over time, it will accumulate dirt and dust. If it is too worn-down, it will no longer be an effective barrier. Small debris may make its way into the engine and cause clogging. It can impede proper airflow. Replacing an air filter is a relatively quick and straightforward maintenance project. Let the device cool first. Then, loosen or remove the air filter cover. Take out the failed filter and install the replacement. Make sure to align it to the housing. Return the air filter cover to its original position. This part will fit several trimmer models from brands like Husqvarna, Poulan, and Craftsman. It has the same shape and cut as the trimmer’s original filter. This replacement does not come with the airbox cover. One genuine Husqvarna airbox filter per order is included, sold individually.
This replacement foam air filter is an authentic OEM replacement part for both lawn tillers and cultivators. For a combustion engine to run effectively, the carburetor must maintain a balance of fuel and air. Therefore, the engine takes in air from the outside and mixes it with fuel. However, if the air is dusty, it will clog the carburetor and cause the engine to seize up. To prevent this from happening, manufacturers add an air filter like this one to capture any dust or debris. When lawn appliances are in use, they often kick a lot of dirt into the air. This means that air filters get a lot of use every time an operator uses their appliance. Eventually, the filter will reach max capacity, and air will no longer pass through it. When this happens, the filter will need replacing. Changing out an air filter is a simple job and will only require a screwdriver at most. This part is made for Cub Cadet, Troy-Bilt, and MTD tillers and cultivators and is sourced from its original manufacturer. This part ships individually.
This OEM replacement part is a foam air filter for a weed eater. This part sifts out dirt and debris before it can enter the carburetor and engine. The carburetor is responsible for maintaining the delicate balance of air and gasoline needed to create a spark in the engine. If it becomes clogged by dirt that's been kicked up into the air during mowing, the mixture will become contaminated and the carburetor will no long work properly. Foam air filters should be replaced every three to four months, depending on how much use the weed eater gets. Generally, after 25 hours of use, the filter will become clogged and will no longer function efficiently. When changing out the filter, first apply a small dab of two cycle oil to the pouch that the filter arrives in. Squeeze with a bit of paper to remove any excess oil and then switch the old filter for the new. This will help the filter collect dirt and debris. This filter is made of seafoam green foam and is intended to be used with Poulan, Husqvarna, and Paramount weed eaters. It ships individually and is sourced from the original manufacturer.
The air filter sifts out particles and debris as air enters the engine of the mower. In small equipment engines, air filters can help provide optimal performance of the engine. The filter is made of durable foam and is rectangular in shape and is sold as a single unit. Over time, they can become clogged with debris and particles and may require replacement as a part of regular maintenance. This MTD air filter replacement will keep equipment running better and releasing fewer emissions. Before installing, soak the filter in oil and then remove the excess. The oil will help catch more debris than a dry filter would and provide more protection for the engine. This filter is made to exact OEM standards and is designed for use on select gas-powered blowers and trimmers made by MTD, Troy-Bilt, and Cub Cadet.
This is a sponge filter that is used in several types of lawn and garden equipment. It helps remove dirt, dust, and other debris before it can reach the engine. If the sponge filter is dirty, damaged, or otherwise not working correctly, debris can end up clogging the carburetor, which will weaken performance or prevent it from starting completely. If the dust and dirt reach the engine, serious engine damage can occur.Inspecting the sponge filter on a regular basis is important to ensure it's working well. It also needs to be replaced at least annually, and possibly more often depending on wear and tear. Replacing the air filter is simple. Take off the lid on the filter and then remove it from the machine. Replace it with the new sponge filter and replace the lid.This is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The sponge filter is compatible with lawnmowers, lawn tractors, and wood chippers manufactured by Craftsman, Huskee, Cub Cadet, MTD, and Yard Machines.
Mowers are manufactured to last for about 500 hours of running, which breaks down to about 19-20 years for the typical non-commercial user. Commercial mowers, which see a great deal more use, are designed to last for 1000 hours of service, which is about 10 years. To extend the life of a lawn mower to its full potential, there are certain simple preventative routines a user can follow, including annual oil and filter changes. One important routine maintenance ritual for mowers that is often overlooked is changing the air filter, something that should be done at least annually. When the mower chugs, cycles, or simply will not start, the first thing to check is the air filter. When replacing the filter, make sure to use a genuine OEM certified replacement part like this one, which is manufactured according to the specification of the original factory filter. This filter is compatible with Bolens, Yard-Man, Troy-Bilt, Yard Machines, and MTD.