Craftsman Leaf Blower Carburetor

A carburetor is responsible for combining fuel and air into the right combustible mixture. When it is malfunctioning, there are several warning signs to look out for. These include poor fuel economy, rough idle, flooding, and engine misfire. Installing a brand-new carburetor can help. A carburetor replacement is easy and starts with turning off the lawnmower. Open its air filter cover and use a screwdriver to remove the air filter base. Once detached, disconnect the throttle cable and fuel line. Place the new carburetor and connect the fuel line and the throttle cable. Put back the air filter base. This is a brand-new and original MTD carburetor. It is compatible with tillers, leaf blowers, and string trimmers from MTD, Bolens, Craftsman, Troy-Bilt, Yard-Man, and Yard Machines. This carburetor is fully assembled and sold individually. Additional carburetor gaskets are sold separately.

This carburetor is a device for supplying a two-cycle engine with a mixture of air and fuel. This part comes pre-assembled and has a plastic choke lever along with a metal body. The primary purpose of a carburetor is to mix the right amount of fuel with air so that the engine runs properly. If enough fuel is not mixed with the air, the engine runs lean and can either stop running or gets damaged. On the other hand, if too much fuel is mixed with air, the engine runs rich, and it either floods, runs poorly, runs very smoky, or wastes fuel. The carburetor is in charge of getting the right mixture. If the carburetor is clogged, the engine will not get enough fuel. It may not start or may run rough. The procedure to replace the carburetor is quick and easy, taking only around 15 minutes, but it is recommended to work in a ventilated area. This carburetor works with outdoor power tools like the trimmer, leaf blower, and tiller. It is compatible with specific products from popular brands like Craftsman, MTD, Murray, and Troy-Bilt. It is sold individually and is supplied directly from the original equipment manufacturer.

This certified OEM replacement part is a carburetor kit for a gas-powered leaf blower engine. For gas to ignite in an engine, there has to be the right amount of air in the system. Without oxygen, the spark won't light and the gasoline will not ignite. A carburetor is responsible for maintaining the right balance of air and gasoline. Therefore, without a properly functioning carburetor, the engine will also not function properly. Carburetors begin to break down over time because of built up exhaust and gunk in the engine. As this grime builds up, the carburetor cannot get enough air and the balance is thrown off. While carburetors can sometimes be cleaned, if it has become overly clogged or damaged, it will need to be replaced. Signs of a faulty carburetor include shakiness and black smoke, backfiring, hard starts, or an engine that will not start at all. Replacing a leaf blower's carburetor requires the crankcase line, primer line, fuel line, air filter, and throttle linkage to all be disconnected using pliers and a screwdriver. This part is intended for Craftsman, Poulan, Weed Eater, and Husqvarna leaf blowers and is sourced from the original manufacturer. It ships individually.

Blowers are often designed with gas-powered engines. When a blower has adequate fuel, but the engine does not start, it could be a problem with the carburetor. This is the part that mixes air and fuel to send into the engine. If an engine starts and dies or fails to start at all, the carburetor may need replacement. This replacement for a blower carburetor works with Craftsman and Poulan blowers, and is compatible with a long list of models. This is an OEM replacement part that features a metal body and which incorporates the rubber primer bulb necessary to begin the starting process. It ships individually and is will require pliers and a screwdriver to make the repair.

This throttle linkage is a genuine Husqvarna part, sold individually. This throttle linkage can be used as a replacement part in a leaf blower. The purpose of the throttle linkage in a leaf blower is to affix the throttle control to the carburetor so that the carburetor and throttle can work in unison to provide power to the engine and control the speed of the appliance as it is propelled forward across a variety of surfaces.The throttle linkage in a leaf blower might need to be replaced if the throttle linkage has permanently detached from its stable position within the throttle controls of the appliance or if the throttle linkage has suffered irreparable damage. If the throttle linkage is not serving its function and cannot be repaired, the throttle linkage should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This throttle linkage is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Poulan Pro.

This replacement part is a carburetor insulator. This is a genuine replacement part made by MTD. This part is found in many types of machinery and is responsible for regulating the temperature within the machine to ensure that it runs smoothly and effectively.A new carburetor insulator might be needed if the appliance or machine is frequently changing temperatures and there is no regulation inside the engine. This can be due to a faulty carburetor and should be replaced immediately if this is the case. Refer to the proper user manual for more information on how to repair or replace this part. Work gloves are also recommended when replacing this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

The genuine replacement primer bulb covers the primer base and plunger on specific leaf blower models. Before starting the leaf blower, the primer is pushed to allow fuel to flow into the carburetor to assist in a smooth engine start. It can also make starting the equipment easier after it has been sitting for a period of time. The bulb is made of plastic and exposed to the elements, so over time it can become cracked, worn, or even completely lost. Without it, the engine cannot be properly primed before operating and therefore will not run as well. Replacing the bulb with a genuine OEM model like this should be done as soon as possible. This OEM primer bulb is manufactured by Husqvarna and can be used for a variety of leaf blowers that are manufactured by the brand. This model is also compatible with Poulan, Craftsman, and Weed Eater products. The bulb is made of durable rubber and may require a screwdriver for replacement to assist in fitting the bulb into place. This unit is sold individually and does not include the primer base assembly or any hardware.

This kit includes all parts necessary to repair the carburetor on certain models of small engine outdoor power equipment.Internal combustion engines require a proper ratio of air to fuel in order to run. The carburetor is responsible for sending a combination of fuel and air to the motor for ignition. Because the carburetor is used every time the engine is started, it can deteriorate over time and may need to be repaired or replaced. Signs of a worn-out or deteriorating carburetor include backfiring, overheating, excessive black smoke, and reduced engine performance. This carburetor repair kit is a genuine OEM replacement part that has been sourced directly from the manufacturer. This carburetor repair kit can be used to fix various different models of Husqvarna, WeedEater, and Poulan blowers, trimmers, and hedge trimmers. Please note this part is sold individually.

This OEM carburetor is designed as a replacement for compatible leaf blowers. The carburetor takes in air and fuel and mixing them together before sending the mixture onto the engine to power the machine. The air comes in through an air filter to remove any impurities and then it passes into a smaller inner chamber, where fuel is injected through small holes in the chamber after also being filtered. Then, the two mix and are passed into the engine through an adjustable butterfly valve. If the engine isn't performing well or will start but won't stay running, the carburetor could be in need of replacement. It’s usually easier to replace the entire assembly than individual parts, and this genuine OEM part can provide the solution for machines it fits. This carburetor replacement is specifically designed to be compatible with select Craftsman, Poulan, and Husqvarna leaf blower engines. The carburetor does not include any gaskets or hardware required for replacement, so those will need to be purchased separately if they are required. Be sure that the engine is completely cool before beginning repairs and wear gloves for hand protection whenever performing engine work on any machines.