Leaf Blower Carburetor

A carburetor is responsible for combining fuel and air into the right combustible mixture. When it is malfunctioning, there are several warning signs to look out for. These include poor fuel economy, rough idle, flooding, and engine misfire. Installing a brand-new carburetor can help. A carburetor replacement is easy and starts with turning off the lawnmower. Open its air filter cover and use a screwdriver to remove the air filter base. Once detached, disconnect the throttle cable and fuel line. Place the new carburetor and connect the fuel line and the throttle cable. Put back the air filter base. This is a brand-new and original MTD carburetor. It is compatible with tillers, leaf blowers, and string trimmers from MTD, Bolens, Craftsman, Troy-Bilt, Yard-Man, and Yard Machines. This carburetor is fully assembled and sold individually. Additional carburetor gaskets are sold separately.

This carburetor is a device for supplying a two-cycle engine with a mixture of air and fuel. This part comes pre-assembled and has a plastic choke lever along with a metal body. The primary purpose of a carburetor is to mix the right amount of fuel with air so that the engine runs properly. If enough fuel is not mixed with the air, the engine runs lean and can either stop running or gets damaged. On the other hand, if too much fuel is mixed with air, the engine runs rich, and it either floods, runs poorly, runs very smoky, or wastes fuel. The carburetor is in charge of getting the right mixture. If the carburetor is clogged, the engine will not get enough fuel. It may not start or may run rough. The procedure to replace the carburetor is quick and easy, taking only around 15 minutes, but it is recommended to work in a ventilated area. This carburetor works with outdoor power tools like the trimmer, leaf blower, and tiller. It is compatible with specific products from popular brands like Craftsman, MTD, Murray, and Troy-Bilt. It is sold individually and is supplied directly from the original equipment manufacturer.

This is a replacement carburetor assembly that is used on small engines found in many types of lawn and garden equipment. The carburetor is responsible for ensuring there is a proper fuel-air mix before the fuel is sent to the engine. This assembly is made from metal and features a plastic lever. The carburetors found in engines are durable, but this does not mean that they will not wear down over time. Eventually, they may need to be replaced. If they have become damaged and are no longer functioning properly, it could cause issues with the performance of the engine. They will need to be replaced. This genuine OEM replacement carburetor is sold individually. Buyers will need to purchase gaskets separately. The part works for wood chippers, tillers, leaf blowers, and other small engines. Brands with models compatible with the carburetor include Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Huskee, Yard-Man. When purchasing, buyers should make sure that this carburetor is correct for their make and model of engine.

This certified OEM replacement part is a carburetor kit for a gas-powered leaf blower engine. For gas to ignite in an engine, there has to be the right amount of air in the system. Without oxygen, the spark won't light and the gasoline will not ignite. A carburetor is responsible for maintaining the right balance of air and gasoline. Therefore, without a properly functioning carburetor, the engine will also not function properly. Carburetors begin to break down over time because of built up exhaust and gunk in the engine. As this grime builds up, the carburetor cannot get enough air and the balance is thrown off. While carburetors can sometimes be cleaned, if it has become overly clogged or damaged, it will need to be replaced. Signs of a faulty carburetor include shakiness and black smoke, backfiring, hard starts, or an engine that will not start at all. Replacing a leaf blower's carburetor requires the crankcase line, primer line, fuel line, air filter, and throttle linkage to all be disconnected using pliers and a screwdriver. This part is intended for Craftsman, Poulan, Weed Eater, and Husqvarna leaf blowers and is sourced from the original manufacturer. It ships individually.

This part is a replacement carburetor assembly. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or defective carburetor in leaf blowers.Carburetors are critical for the proper functioning of an internal combustion engine as they enable the proper mixture of air and fuel for ignition. If the carburetor is faulty, the equipment may not run properly or may not turn on at all. Thus, the carburetor will need to be replaced. When working on or near an engine it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this carburetor assembly, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This carburetor assembly can be used with different models of leaf blowers that have been manufactured by Husqvarna, Poulan, and other brands. Part sold individually.

Blowers are often designed with gas-powered engines. When a blower has adequate fuel, but the engine does not start, it could be a problem with the carburetor. This is the part that mixes air and fuel to send into the engine. If an engine starts and dies or fails to start at all, the carburetor may need replacement. This replacement for a blower carburetor works with Craftsman and Poulan blowers, and is compatible with a long list of models. This is an OEM replacement part that features a metal body and which incorporates the rubber primer bulb necessary to begin the starting process. It ships individually and is will require pliers and a screwdriver to make the repair.

This replacement part is a carburetor assembly and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This carburetor assembly is used in leaf blowers and snow blowers and is part of the engine. This part is one of the most important parts of the machine and is responsible for allowing it to run smoothly.A new carburetor assembly might be needed if the current engine is slow to start, slow to stop, or won't start at all. This can be due to a malfunctioning carburetor and create problems within the machine. Be sure the appliance is completely powered down before replacing this part. work gloves are recommended to ensure safety during any type of repair.This carburetor is sold individually and is a genuine OEM replacement part. This is also sourced directly from the manufacturer.

This throttle linkage is a genuine Husqvarna part, sold individually. This throttle linkage can be used as a replacement part in a leaf blower. The purpose of the throttle linkage in a leaf blower is to affix the throttle control to the carburetor so that the carburetor and throttle can work in unison to provide power to the engine and control the speed of the appliance as it is propelled forward across a variety of surfaces.The throttle linkage in a leaf blower might need to be replaced if the throttle linkage has permanently detached from its stable position within the throttle controls of the appliance or if the throttle linkage has suffered irreparable damage. If the throttle linkage is not serving its function and cannot be repaired, the throttle linkage should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This throttle linkage is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Poulan Pro.

Here is a replacement carburetor assembly specifically for use with handheld blowers. The carburetor is the part of the machine responsible for mixing the air and the fuel before the mixture goes to the engine. It helps to ensure a good start and performance of the engine each time the blower is fired up and used. The carburetor can become damaged or it could start to wear out over time. When this happens, it means that engine performance is likely to suffer. In some cases, the engine might stall. It's possible to test the carburetor by ensuring there is fresh fuel inside, removing the air filter, and adding a teaspoon of fuel to the carburetor. Pull the starter rope and see if the engine starts and then dies immediately. If that's the case, it means that the carburetor is likely the problem and will need to be replaced. This is a genuine OEM replacement carburetor for handheld blowers. It is sold individually and is compatible with certain models from the brands Husqvarna and Weed Eater.

This replacement part is a carburetor adapter and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. This carburetor adapter, also referred to as a carburetor spacer, is able to increase the distance between the intake of the bottom of the carburetor. This reduces the velocity of the intake charge which allows the entire appliance to run smoothly and efficiently.A malfunctioning adapter might cause additional friction inside the machine, so be aware of extra heat. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This replacement part is a carburetor insulator. This is a genuine replacement part made by MTD. This part is found in many types of machinery and is responsible for regulating the temperature within the machine to ensure that it runs smoothly and effectively.A new carburetor insulator might be needed if the appliance or machine is frequently changing temperatures and there is no regulation inside the engine. This can be due to a faulty carburetor and should be replaced immediately if this is the case. Refer to the proper user manual for more information on how to repair or replace this part. Work gloves are also recommended when replacing this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.