Craftsman Pruner Parts

This is a quality air filter used with many types of gas powered string trimmers. The air filter plays an important part in the engine since it ensures the motor only has clean air available. The air filter is responsible for catching dirt, dust, and other debris and collecting it in one place before it can move into other components of the trimmer. The air filter needs to be inspected on a regular basis for damage or clogging. If either of these things occurs, the air filter needs to be replaced to ensure the engine gets clean air.No tools are needed to replace this string trimmer air filter. The bolt knob that secures the air filter cover will need to be removed first. Remove the original air filter and place the new one in the same location. Reassemble the parts and make sure to test the string trimmer before use.This air filter is compatible with various string trimmers manufactured by Poulan, Poulan Pro, and Craftsman. It is sold as an individual component. It is an authentic OEM replacement part that is sourced directly from the manufacturer.

This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.

The clutch assembly is located in the clutch drum and connected to the drive shaft of the motor. This part is what allows the engine to idle without actually driving the cutter on lawn and garden equipment. The clutch is constantly engaged, so it can wear out over time and eventually need to be replaced. It may also become damaged in a direct impact or incident. If the clutch assembly fails, this could impact the ability of the engine to idle properly or even to remain running once it's started. This replacement part can offer an exact fit for compatible engines. This OEM clutch assembly is manufactured to high standards by Poulan and is designed to be compatible with various machines from Poulan, Weed Eater, Jonsered, and Husqvarna. The clutch assembly is a replacement part for various trimmers and pruners from the brands listed above. Replacing the clutch will require a wrench, screwdriver, pliers, and socket set. Be sure to cool the engine completely and wear gloves when doing repairs on lawn and garden equipment for safety.

The clutch drum assembly seen here from Husqvarna is an important part of machines such as trimmers and pruners. The purpose of the clutch drum is to engage the clutch to spin the flex shaft and the cutting head. The clutch drum assembly could need to be replaced for many reasons. One of the most common signs is when the trimmer head stops spinning when it encounters weeds, grass, etc. Other signs include having a drive shaft that will not engage or a clutch that won't engage the drum. Sometimes, the lining in the clutch drum could become stripped, so there will be no torque when it is used. Replacing the clutch drum assembly can be a complicated task and will require a range of tools. Owners will also need to empty the fuel from the machine before they replace the clutch drum. This authentic clutch drum assembly is an OEM part from Husqvarna. It is sold individually and works for certain models of string trimmer and pole pruner. Brands that are compatible in addition to models from Husqvarna include Craftsman, Weed Eater, Poulan, and Poulan Pro.

This replacement oil tank for a pole pruner or chainsaw is an authentic OEM replacement part. The inner workings of an engine consist of many moving parts. These parts are mostly made of metal and they thrash about against each other to produce and transfer energy. Engines use oil to lubricate these parts so that they do not rub and create friction as this would cause the engine to overheat. This oil tank lets operators quickly top up their engines with oil without having to take apart the inner mechanics. Oil tanks are made of durable reinforced plastic but it is still possible to bang, dent, or even puncture them. Should this happen, oil will leak from the tank and the engine will be starved of lubrication. For safety purposes, it is important to immediately replace a broken oil tank. To do so, use a wrench to remove the old tank and install the new part with the same bolts. This oil tank is compatible with Poulan and some Husqvarna appliances, and as a high-quality replacement part, it comes sourced from its original manufacturer. This part includes an oil tank and oil tank cap but it does not include an oil line.

This is a recoil starter pulley kit that can be used as a replacement for many different models of handheld trimmers and similar outdoor power equipment. The starter pulley is an important part of the starter mechanism in the engine. When the user pulls the rope to start the engine, the pulley will engage the flywheel, which will then allow the engine to start running. Owners might find that they need to replace the recoil starter pulley at some point. Over time and with a lot of use, this part can begin to wear down. Elements of it could break or wear away. If this happens, it will be difficult to get the engine started because the pulley will not properly engage the flywheels. Sometimes, it might be impossible to get the engine started at all. The owner will then need to replace the recoil starter pulley. This is a genuine OEM replacement part that is sold individually. The pulley can work with many models of pole pruner, string trimmer, and leaf blower. Compatible brands include Husqvarna, Craftsman, Poulan, and Poulan Pro.

This fan baffle is a genuine Husqvarna part, sold individually. This fan baffle can be used as a replacement part in a string trimmer or a pole pruner. The fan baffle in a string trimmer or a pole pruner might have to be completely replaced if the fan baffle can no longer serve its typical function. This could occur if the fan baffle suffers damage for which a repair cannot be conducted. If this occurs, the fan baffle should be removed and replaced by this genuine OEM replacement part in accordance with the proper set of instructions sourced from a relevant appliance manual or handbook. It is a simple replacement process that will only require simple tools to conduct. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This fan baffle is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Poulan Pro.

This starter cup assembly is a genuine Husqvarna part, sold individually. This starter cup assembly can be used as a replacement part in a string trimmer. The purpose of the starter cup assembly in a string trimmer is to rotate the flywheel with the purpose of powering on the small engine of the string trimmer; the starter cup assembly is a key component of the pull-start mechanism of a string trimmer.If the starter cup assembly suffers from puncturing, tearing, scraping, cracking, denting, eroding, or warping to the point of reduced efficacy, the starter cup assembly should be removed and replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This starter cup assembly is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Poulan Pro.

The curved drive shaft is a hollow piece that holds the drive cable, so that the engine can turn the cutting string. A curved drive shaft allows for more maneuverability and a lighter string trimmer. The curved shaft is also best suited for users who are shorter in height, or working in tight spaces that require more maneuverability. This product is made of durable plastic, but can become dry, worn or cracked over time. Replacement is needed when experiencing excess vibrations in the housing and handles, or excess spinning of the head occurs. If noticeable drying or cracking is observed on the part itself, go ahead and replace to maintain the functionality and safety of use. Replacement is simple, and may require a wrench, socket wrench or screwdriver; depending on type of trimmer. Remove trimmer head and guard by unscrewing the head from the shaft, and unscrewing the wing nuts that hold the guard in place. Using the socket wrench, loosen the locking nut at the top of the drive shaft, depress the alignment pin and remove the old drive shaft. Attach new shaft and reassemble. This part is compatible with Poulan trimmers and is an OEM part sourced directly from the manufacturer, and it is sold individually.

This genuine Husqvarna rope kit can be used as a replacement part for the small engine of string trimmers. A rope kit works alongside the starter handle to facilitate the recoil starting mechanism in a string trimmer. This is the mechanism by which the string trimmer is turned on; the rope is looped around a pulley and the rope is pulled and coiled off of the pulley in order to power the engine.A rope might have to be replaced by this rope kit if it shows visible signs of wear and tear that affects its ability to start the engine. If a rope looks like it is fraying or has worn out over time from exposure or general long-term usage, the rope should be removed and replaced with this genuine OEM replacement part before using the string trimmer again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This rope kit is compatible with the following brands: Husqvarna, Poulan, and Weed Eater.

This is a throttle cable that fits many types of lawn and garden equipment, like pole pruners. This component is the part that links the carburetor to the throttle trigger to ensure the machine runs smoothly. Throttle cables have small connectors on both ends that can occasionally become brittle and break after extensive use. The cable can also sometimes become damaged or kinked during use and require replacement.If the throttle cable is damaged or broken, replacing it involves removing the throttle cable and then separating the two sides of the throttle housing. The throttle trigger can then be removed followed by the rear cover. At this point, the throttle cable itself can be removed. The new throttle cable will be passed through the engine housing and the large hole in the carburetor mounting plate. The cable housing can be pressed into the plastic tube before reassembling all the other parts of the tool.Made for a variety of pole pruners and string trimmers, this throttle cable works with tools by Poulan Pro, Craftsman, Poulan, and Weed Eater. This is a genuine OEM component that is directly sourced from the manufacturer. It comes as an individual part.

This flywheel assembly is for use with trimmers and pruners. This part is located on the crankshaft on the outside of the case, and it creates a spark from the magnets on its sides. Flywheels can become damaged or worn with use over time and should be replaced if they are no longer functioning as they should.Check for knocking, rattling or other chirping noises when the flywheel is engaged; these are signs that it is failing. Eventually, once this part has failed completely, the garden tool will no longer function at all. Replacing a flywheel assembly is a simple task with the appropriate tools. Wear gloves for protection while making the repair. Be sure the device is entirely cooled before attempting to work on it.This flywheel assembly is an authentic OEM replacement part. It is made from high-quality, solid, metal materials. The flywheel assembly is sold as an individual unit. The replacement part is sourced directly from the manufacturer. It can be installed in both Husqvarna and Poulan brand lawn equipment. It is used in over 25 different models of trimmers and pruners.