Craftsman String Trimmer Gasket & Seal

A carburetor gasket is a thin rubber material that provides a seal between two parts. Its primary purpose is to prevent fuel and air leaks. This gasket is installed between the air cleaner and the carburetor. Over time, it can crack and tear due to heat and fuel exposure. When this happens, the carburetor may produce the wrong combustible mixture for the engine. In return, the engine may experience rough idling and flooding. A carburetor gasket replacement is necessary. MTD makes this carburetor gasket replacement. It is manufactured to fit string trimmer, leaf blower and tiller made by MTD, Bolens, Troy-Bilt, and Craftsman. This brand-new carburetor gasket is sold individually. A fully assembled carburetor and O-ring are sold separately.

These O rings are replacement parts intended for use in a number of gasoline-powered lawn trimmers. The O rings serve as gaskets and are placed at the entry and exit points in the carburetors where gasoline and air are mixed and the expansion powers the trimmer. Though constructed of durable material, periodically the flow of the air/fuel mix or the rush of expanding air will cause damage to occur to the O rings so they become less resilient and the carburetor functions less efficiently. In these cases, users often decide to replace not just the element of the carburetor but the O rings as well. Users may notice problems with the carburetor when they cannot get an adequate adjustment, allowing the trimmer to function smoothly. They may also have trouble getting the trimmers to start at all or run without smoking. To replace the O rings, remove the air filter cover and carburetor. Once the carburetor has been cleaned, and the gasket and filter replaced, add a fresh mix of 40:1 fuel. The trimmer should start immediately. These OEM certified O rings are compatible with Bolens, Troy-Bilt, Yard Machines, and Craftsmen trimmers.

Carburetor gaskets ensure that the space between the carburetor itself and the insulator is properly sealed. This prevents air from seeping into the engine. As time passes, gaskets begin to become worn and crack, which can lead to small air leaks. If the gasket deterioration becomes severe the leaks will worsen. An air leak on an engine can cause vibrations and misfires. Gaskets should be regularly replaced to prevent engine trouble. This carburetor gasket is a genuine OEM part that has been sourced directly from the manufacturer. This carburetor gasket is manufactured from a top-quality composite material. This replacement gasket fits a number of different models of Troy-Bilt and Craftsman lawn and garden equipment. Please note these gaskets are sold individually.

This is a genuine replacement O-ring, which is a standard part on a number of engines. This O-ring is specifically designed as a replacement for the one found in the carburetor on select lawn and garden engines. The O-ring is designed to create a seal in the carburetor to ensure optimal performance and prevent leaks. It is also designed to help create the right amount of pressure. Over time, O-rings can become corroded, worn, or damaged due to their exposure to pressure and high heat. If they become broken or damaged, they can result in poor engine performance or even total engine failure. This genuine OEM O-ring is manufactured by RYOBI and compatible with a number of tillers, trimmers, and blowers from this brand. It is also designed for use with select models from Bolens, Yard Man, MTD, and Troy-Bilt. There are more than 150 models that can use this specific O-ring. It is made of durable materials and sold as an individual unit. Keep in mind that because O-rings have multiple applications and engines may have more than one type, it is important to double-check the location and application of the part to ensure the right one is being used.

This gasket kit is a genuine Husqvarna part, sold individually. This gasket kit can be used as a replacement part in a string trimmer. The gasket kit comes with all of the necessary components required to facilitate a complete replacement or a new installation of a gasket within a string trimmer. The purpose of a gasket in a string trimmer is to seal off a certain internal area of the appliance so that oil or internal materials cannot leak out of the area of the gasket and debris cannot pass into the area of the gasket.The gasket kit might need to be ordered to conduct a replacement of a gasket that has suffered damage over general wear and tear from long-term use of the string trimmer or as a result of an accidental collision with a hard object that rendered the gasket beyond functionality. If this occurs, the gasket kit should be ordered as a genuine OEM replacement part before using the string trimmer again.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This gasket kit is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Poulan Pro.

This carburetor boot adapter is designed for use specifically on gas trimmers. It is compatible with products from Husqvarna, Poulan, and Craftsman. The carburetor boot adapter plays an integral role in connecting the carburetor to the carburetor adapter. The purpose of the carburetor boot adapter is to ensure the proper running of the carburetor and its adapter. The replacement or repair process of the carburetor boot adapter is incredibly straightforward.Since the carburetor boot adapter is made out of rubber, over time and with exposure to the elements, it will naturally dry out and crack. If this part is warped, cracked or damaged, it needs to be replaced immediately for the unit to operate properly.This carburetor boot adapter is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured by Husqvarna.

This gasket is a genuine MTD part. It is an insulator gasket meant as a replacement part on tillers, string trimmers, leaf blowers, edgers, and cultivators. The insulator gasket seals the connection between the insulator and cylinder. This gasket is made of durable, heat-resistant plastic. To replace the insulator gasket, a pair of work gloves, wrench, and screwdrivers are necessary. This gasket is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with machines made by Craftsman, Cub Cadet, MTD Pro, Troy-Bilt, Yard Machines, and Yard-Man.

This o-ring is a genuine OEM part sourced from the manufacturer for use in many parts of engines in lawn and garden equipment. The o-ring is a type of gasket but is not flat like a gasket. It is circular and made of rubber. It is seated in a groove on the engine part and is compressed against another part to create a seal. This seal keeps air and fluids from entering or exiting the sealed part. Like gaskets, o-rings must be periodically inspected and replaced to ensure proper engine performance.Visual inspection of o-rings will reveal nicks, indentions, cuts, or tears on the surface of the o-ring. If the rubber has warped due to excessive heat, it will not fit properly and will need to be replaced. The replacement may not require tools, depending on the location of the rubber gasket. Remove the bad o-ring and wipe both sides of the area to remove the old grease. Apply fresh grease to the o-ring before installing it to ensure a tight seal. Press the new o-ring firmly in the groove before attaching the connecting part. If the ring does not seat well or has to be stretched to fit, discard and start with a new o-ring.The o-ring is sold individually. It is designed for trimmers and tillers. It is compatible with Craftsman, MTD, Bolens, Troy-Bilt, and Cub Cadet.

The design and purpose of the O-ring is relatively self-explanatory. It is an “O” shaped ring used as a gasket in lawn and garden equipment. It is designed to sit within a groove and be compressed during assembly. It creates a perfect seal that blocks the path of liquids or gases from escaping or flowing into regions of the machine where they are not supposed to be.The O-ring may be damaged if an outdoor piece of equipment is struggling to start or run. After checking the air filter cover, removing the carburetor, and cleaning it thoroughly, the next step is to replace the O-rings, carburetor gasket, and air filter, followed by the spark plug. Regular maintenance of the carburetor and routine evaluation of the suitability of the O-ring is essential to proper mechanical maintenance.This O-ring is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. The manufacturer of this product is MTD. Examples of compatible products and machines includes trimmers, tillers, weed wackers, brush cutters, and leaf blowers or leaf vacuums. It is compatible for products made by the following brands: MTD, Cub Cadet, Craftsman, and Troy-Bilt.

This genuine OEM replacement part is a rebuild kit of various gaskets used in a gas-powered leaf blower engine. This kit includes a crankshaft gasket, a carburetor gasket and carburetor adapter gasket, a cylinder base gasket, and a muffler shield. Gaskets act like a seal between different parts of an engine that keeps different liquids and gasses from passing into the wrong section of the engine. Gaskets can become worn out and crack or shrink over time through repeated use and exposure to exhaust and heat in the engine. A common sign of a fault gasket is if your engine is not running at full capacity or if it stalls out shortly after ignition. Changing out a gasket should not be a difficult job, but it will depend on which gasket you are replacing. Making this repair will require a screwdriver and set of pliers. This gasket rebuild kit is compatible with Poulan, Weed Eater, and Husqvarna gas powered leaf blowers. These gaskets are made of a mix of plastic and rubber. This kit ships individually and is sourced directly from its original manufacturer.

This gasket kit features replacement gaskets for use in a range of gas-powered handheld lawn and garden machines. The kit includes a range of O-rings, seals, and gaskets used as a means to provide tight seals between elements of the engine to prevent leaks from air, fuel, oil, and so forth. Even durable gaskets such as those found in engines will start to wear down over time. They can start to crack and break, and sometimes they will shrink. When this happens, they no longer provide a tight seal and will need to be replaced. It is recommended that the gaskets and seals are replaced whenever the owner is servicing their small engine. This will ensure a proper seal when the engine is reassembled. This gasket kit has genuine OEM parts to ensure a proper fit and a tight seal. The kit is sold individually and works with many models of string trimmer and edger. Compatible brands include Craftsman, Husqvarna, Weed Eater, and Poulan.

This is an authentic replacement bowl drain washer for use with lawn mower engines and other types of lawn and garden equipment. The washer is used to help seal the connection between the float bowl and the bowl drain screw in the engine. Although the washer is made from metal, it may still need to be replaced at some point if it becomes corroded, bent, or otherwise damaged. This would mean that it no longer provides a proper seal and that there could be leaks. Owners should periodically take the time to inspect the bowl drain washer, along with other elements of their machine, and replace them as needed. It may be a good idea to have several of the washers on hand. The genuine OEM replacement bowl drain washer is sold individually. It will work with a range of different types of machines including lawn mowers, snowblowers, pressure washers, and other small engines. Compatible brands include Craftsman, Toro, Tecumseh, Lawn-Boy, MTD, and Briggs & Stratton. Buyers should always be sure they are choosing the correct washers for their needs.