Craftsman String Trimmer Hose, Tube & Fitting

A carburetor needs fuel to produce the required combustible mixture of air and gas. To get fuel, the carburetor draws the liquid directly from the fuel tank. Any excess fuel will be returned to the tank through the fuel return hose or fuel return line. In addition to providing the path, a fuel line is also responsible for preventing over-pressurization, as well as vapor lock. A fuel return line is constructed from a thick rubber material that is also fuel resistant. However, it may still become brittle and crack due to regular wear and tear. Usually, a broken fuel return hose results in symptoms such as engine misfires, loss of power, carburetor flooding, fuel leaks, and hard starting. A brand-new replacement is available here. This fuel line return is an original part from MTD. It measures 3.78 x 3.78 x 0.016 and is compatible with tillers, leaf blowers, and string trimmers made by Craftsman, Ryobi, Yard Machines, MTD, Bolens, and Yard-Man. Installation will require a screwdriver, cutters, and pliers. This fuel line return is sold individually.

This flex tube is a genuine MTD part sourced directly from the manufacturer. It is made as a replacement part for blowers. Especially since it is made of plastic, it is normal for it to need replacement from extended wear and tear.This is a relatively easy repair, although some disassembly of the engine and the equipment is required. To replace the flex tube on a blower, allow the engine to cool completely, disconnect the spark plug to prevent the equipment from accidentally powering on, and empty the fuel tank. Next, detach the blower nzle and extension tube. Loosen and remove the swivel blower tube, detach the cable clip, and remove the screws attaching the original flex tube. Replace the flex tube. Before ordering, inspect the blower to see if new screws are also needed.This flex tube is a genuine OEM part sourced directly from the manufacturer. It is compatible with machines made by Craftsman, Murray, Remington, MTD, Troy-Bilt, and Yard-Man. It is sold individually.

This fuel line hose is an authentic OEM replacement part for various lawn mowers, tractors, and snow blowers. The fuel line is responsible for carrying fuel from the fuel tank to the carburetor. It is made of a thick vinyl rubber material and clamps onto the exterior of the lawn appliance. Although they are usually made of durable rubber, fuel lines can tear if they are caught on something while the appliance is in use. If the fuel line rips, fuel will leak from the fuel tank and carburetor onto the appliance and the operator. This has the potential to start a fire and should be fixed as soon as possible. It is recommended that all fuel be drained from the appliance before making this repair. Using a pair of needle-nosed pliers, detach the damaged fuel line from the appliance and pull it out from the carburetor and through the fuel tank. Reassemble with the new hose using the pliers. This part is a high-quality replacement hose sourced from its original manufacturer and is compatible with Cub Cadet, Huskee, Yard Man, MTD, Troy-Bilt, and Yard Machines appliances. This part does not ship mounting clamps or any additional hardware.

This fuel line assembly is created for use with string trimmers and is used to bring gasoline to the small engine in a lawn and garden tool. As the string trimmer is used, the fuel line assembly can start to break down, which may result in cracks in the fuel lines or discoloration. This can cause the fuel line to stop working the way it should, which will affect the performance of the trimmer. If the fuel lines are no longer the correct color or seem brittle, a replacement is likely needed. The line can be pinched to see if there are any visible cracks. In some cases, the primer bulb will no longer seal the way it should and will create more air than expected when priming the trimmer. Another sign that the fuel line assembly is damaged is lower power when someone uses the throttle. This is a genuine OEM part that comes directly from the manufacturer. It is a single part that is designed for use in Troy-Bilt, Craftsman, MTD, and Yard-Man string trimmers. No additional tools are needed to make the replacement.

This fuel line kit is a part used in gasoline-powered edgers and trimmers. It delivers fuel from the gasoline tank to the carburetor where it is mixed with air that has come through the air filter. The mix flows into the combustion chamber where it is ignited to turn the driveshaft of the tool. As an added feature, this fuel line kit also has another line to feed excess fuel back into the gas tank. Extra, unneeded fuel sometimes flows into the carburetor when the engine is cold and users are trying to prime the engine. Although durable and intended to last, this fuel line is subject to weathering over the course of several years, especially when subjected to temperature extremes. A broken or fractured fuel line will leak gasoline, resulting in an extremely dangerous situation. Leaking fuel lines must be replaced immediately. This component is easily located, situated between the fuel tank and the carburetor. It is easily disconnected and replaced. When choosing a new fuel line kit, make sure to choose a part like this one, which is a genuine OEM certified part. This fuel line kit is compatible with Jonsered and Husqvarna equipment.

This is a replacement leaf blower tube. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective leaf blower tube on a variety of different leaf blower models. This tube makes up part of the vacuum attachment assembly. It links the vacuum bag directly to the lower tube. This part can become worn with regular use and may require replacement. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this mulcher kit, refer to the appropriate owner's manual and included diagrams.As an authentic replacement part, this leaf blower tube is suitable for use on several different lawnmower models manufactured by Husqvarna and Craftsman. This is a genuine part made of high-quality, durable materials and is sold individually.

This OEM lower leaf blower tube attaches to the upper blower tube to create a long tube used to project the air from the blower. The lower leaf blower tube is the part that is located farthest from the machine itself. The upper leaf blower tube is located closest to the machine.The lower leaf blower tube may need to be replaced if it is lost or if the plastic is broken for any reason. If broken, it cannot be repaired but must be replaced. Remember to wear gloves when operating or replacing parts on any lawn machine equipment.This is a genuine Husqvarna part sourced directly from the manufacturer. This lower leaf blower tube is compatible with leaf blowers manufactured by Husqvarna, Craftsman, Poulan, and Weed Eater. Please note that this is sold individually and only includes the lower tube; the upper tube must be purchased separately in the event that it's needed.

This part is a high speed restrictor nzle that is used on blowers. The restrictor style of nzle concentrates the air stream for increased power by acting as a funnel. This nzle is twisted onto the lower blower tube. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Use caution when working with any outdoor power equipment.A new high speed restrictor nzle may be needed if the original is cracked, broken, or damaged in any way. If the nzle will not turn to lock into the lower blower tube, both parts should be inspected to determine which component needs to be replaced. This high speed restrictor nzle is a genuine Husqvarna part. It is sold individually. This specific high speed restrictor nzle is compatible with blowers that are manufactured by Craftsman, Husqvarna, Poulan, McCulloch, and Weed Eater.

This is a fuel line assembly that is made to be used in Craftsman and MTD string trimmers. It is composed of strong black and white plastic. The fuel line takes extra fuel and brings it to the fuel tank when the primer bulb has been engaged and the carburetor is primed. Time and regular use can lead to clogging or cracks in the fuel line assembly, which can lead to serious engine issues. If these problems are present, the fuel line assembly needs to be replaced.Make sure to drain any gasoline out of the fuel tank and disconnect the spark plug wire before starting the replacement process. Remove the original line from the carburetor and fuel tank before attaching the new line and using the string trimmer.This fuel line assembly is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The fuel line is made for use with string trimmers manufactured by Craftsman and MTD.

This J tube is used to attach the vacuum tube to the vacuum bag. In order for the leaf blowers to function correctly, the tubing needs to be in prime condition to seal the air moving through the machine. This will enable full functionality of the blower. It's made of a durable black plastic, and will need to be replaced if cracking or warping is experienced. Exposure to elements as well as general use will lead to a need for replacement over time. Replacement is needed if visible cracks or drying is seen in the tubing, or if noticeable difference in amount of air moving through the vacuum component is hindering full use. Replacement is simple, and doesn't require tools. Separate the old part from housing, and replace it with the new part. This part is compatible with the Poulan and Weed Eater brand leaf blowers and gas powered leaf blowers. The wave washer is an OEM part sourced directly from the manufacturer, and it is sold individually.

This part is a replacement upper tube blower. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a faulty or damaged upper tube blower on a variety of leaf blower models. This particular upper tube blower is used with gas powered leaf blowers. This part connects the lower tube to the blower housing. No special tools are required to replace this part. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this upper tube blower, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this upper tube blower is suitable for use on several different models of leaf blowers manufactured by Husqvarna. This is a genuine part made of high-quality, durable materials and is sold individually.

A fuel inlet is a connector that allows gasoline from the fuel line of an engine to pass through it into the carburetor. Once in the carburetor, the fuel mixes with air and passes into the cylinder, where it ignites to create power for the engine. Thus, the fuel inlet is attached on the one side the carburetor and to the fuel pipe, or line, on the other. This inlet is used in power tools such as lawn mowers, snowblowers, edgers, pressure washers, chippers, and generators. Periodically, since it is made partially of plastic, the fuel inlet will weather and crack so that it is no longer fuel tight. The main sign to watch out for with fuel inlets is gasoline leakage. This is always a dangerous situation. The user may have to remove the carburetor housing cover to determine whether the leak comes from the fuel line or the inlet valve. It is a good idea to replace each of these pieces at the same time. When choosing a replacement part for the fuel inlet, always use a genuine OEM replacement part like this one. This inlet is compatible with power tools made by Tecumseh, Briggs & Stratton, Toro, MTD, Lawn-Boy, and Cub Cadet.