Need Help?
Call or text
Show parts
Usually ships within 4 - 14 days
This is a standard hardware screw that is used in multiple applications on lawn and garden equipment. The hex screw may be used to secure various components of the housing or engine on machines. Due to constant vibrations and use, these screws may become worn, stripped, broken, or even lost over time. In the event that a screw is damaged or missing, it should be replaced immediately to prevent further damage and ensure optimal operation of the machine. This screw can provide the ideal replacement for compatible machines. This genuine OEM screw is manufactured by Echo and designed to be used with select Echo, Little Wonder, and Shindaiwa lawn and garden equipment. Because this is standard hardware with multiple applications on more than 150 models of machines, it is important to check the parts diagram for exact location and application. This screw can be found on edger/trimmer models, blowers, and hedge trimmers. The screw is sold as an individual unit and includes a nut and lock washer to secure the screw in place. An Allen key or hex key will be required for replacement. Always wear gloves and allow the engine to cool before doing any parts replacements.
This is a cylinder head gasket that is located between the cylinder head and the engine block on lawn and garden equipment. This gasket is responsible for sealing in the internal combustion process. It also prevents oil and coolant from mixing as they move from the engine block to the cylinder head. Some signs that a new cylinder head gasket may be needed include fouled spark plugs, leaking coolant, white smoke, an overheating engine, and milky white oil. As time goes on, gaskets can deteriorate and may crack, which means a replacement is required. Some of the tools that may be needed include a nut driver, socket driver, spark plug wrench, hex bit, screwdriver, Torx screwdriver, torque wrench, and a gauge. This is an expert replacement that requires a great deal of mechanical knowledge. First, get access to the head gasket and check it for flatness. Prepare the surface, remove the old head gasket, and install the new one. This is a genuine OEM component provided directly from the manufacturer. It is designed to be used in Echo, Little Wonder, and Mantis tillers, pole pruners, string trimmers, hedge trimmers, leaf blowers, and edgers. This component is sold individually.
Piston rings help to maintain the pressure between the piston and cylinder wall. If the compressed gas between these two parts begins to leak out, the engine will not be able to put out enough energy, and the lawn appliance will stop working. Piston rings can wear out over time due to engine overheating or faulty ignition in the engine. A telltale sign of a burnt-out piston ring is whitish-grey smoke coming from the appliance. Extreme oil inefficiency is another sign. This part is a genuine OEM part designed for Echo or Mantis handheld yard tools such as a chainsaw, hedge trimmer, leaf blower, edger, pole pruner, or tiller engine. It does not ship with other parts. Any additional parts needed to install the piston ring must be ordered independently.
The intake gasket is designed to act as a seal between the cylinder head and the heat dam. It keeps the engine sealed and protected during use. Not only does this reduce the risk of damage to the engine on various lawn equipment units, but it eliminates potential leaks that could reduce engine power or performance and ensures maximum flow to the engine. Gaskets can become worn or damaged over time with regular use or they can break unexpectedly. This Echo gasket is made from compound material that is durable and designed to withstand the high heat inside of an engine. Use it to replace the gasket in compatible lawn equipment. This gasket is an OEM part that is designed to fit many Echo and Little Wonder lawn and garden equipment engines. There are more than 150 compatible models in total, including blowers, pumps, reciprocating saws, cultivators, edgers, and other saws. Check your user manual for compatibility and to see if there are any special replacement instructions to consider.
This genuine Echo retaining ring can be used as a replacement part for string trimmers, hedge trimmers, chainsaws, leaf blowers, and leaf vacuums. The function of a retaining ring for a small engine appliance is to fasten and limit the motion of a component by attaching it to a shaft or into a bore. A retaining ring can come loose and fall off, becoming lost. A retaining ring can also suffer damage over time in the form of punctures, piercings, or corrosion to the metal material that can preclude it from continuing to fasten components to shafts and bores. If this is the case, the damaged retaining ring should be immediately removed and replaced with this genuine OEM part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This retaining ring is compatible with the following brands: Echo, Little Wonder, and Shindaiwa.
This part is a genuine replacement for Echo exhaust gaskets on select lawn and garden machines. It creates a seal between the exhaust shield and exhaust pipe. Gaskets are exposed to high temperatures and constant pressure, so they may wear down over time. They can deteriorate or become compressed, which affects the quality of the seal that they create. This could impact the engine performance in various ways. Replacing the gasket is generally the best solution. This OEM exhaust gasket is compatible with a variety of machines from Echo and Little Wonder, including blowers, pruners, cultivators, pups, drills, and reciprocating saws. Replacing gaskets requires the use of multiple tools. Gloves should be worn for hand protection and the engine should always be cool before any repairs are done. This durable gasket meets all EPA requirements and is made from durable composite material. It is sold as an individual item and those who need additional gaskets will have to purchase multiple quantities.
The muffler gasket here is a replacement for use in various types of handheld outdoor equipment. The gasket will provide an airtight seal between the muffler and the exhaust guide on the equipment. Over time, the muffler gaskets could start to shrink and to become brittle. A bad muffler gasket could cause a noisier engine or a loss of power if air is getting into the engine. They may also crack. Any of these issues would require the gasket to be replaced. This is a genuine OEM replacement muffler gasket. It is made from durable material and is sold individually. It can work with many types of lawn and garden equipment including tillers, string trimmers, leaf blowers, edgers, pole pruners, and hedge trimmers. Brands that are compatible with the gasket include Mantis, Little Wonder, and Echo.
This oil seal is used in a wide selection of lawn and garden equipment. It is used to prevent dust, water, dirt, and other contaminants from reaching important parts. It also helps retain lubrication so the motor can run without any issues. If the oil seals are no longer working correctly, it can allow the oil to leak out of the tool. Topping off the oil is an option, but replacing the seal will take care of the issue for good. If there is oil leaking from a pole saw or hedge trimmer, this is an indication that new oil seals may be needed. Sockets and wrenches will be needed to handle the replacement process. Drain the oil from the engine and remove the motor to get started. Take a look at the oil seals and how they are seated for replacing the seal later. A drill or a screw can be used to remove the old seal before putting the new one in. Designed for use with Echo, Little Wonder, Mantis, and Shindaiwa string trimmers, hedge trimmers, leaf blowers, tillers, edgers, and pole saws, this component is sold individually. It is a genuine OEM part that comes directly from the manufacturer.
This is a ball bearing that is made out of durable metal and used in a variety of lawn and garden equipment types. It fits in between a washer and a spacer in a tool to prevent excessive heat and friction between different components. The ball bearing takes the load and spins to help distribute weight while preventing friction so the tool runs at its best. When the ball or bearing retainer wears out, it can cause issues with the gardening tool. If it is located in a wheel, it can make it hard to turn.Wear is constant on ball bearings whenever a tool is in use, which means they over time they will start to experience issues and can wear out. Pressure, heat, vibration, and friction will take a toll over time. It's important to maintain the ball bearings and replace them whenever needed. This ball bearing is a genuine OEM replacement part that is sourced directly from the manufacturer. It's sold as an individual component. The part is designed for use with string trimmers, hedge trimmers, chainsaws, tillers, and pole pruners made by Echo, Little Wonder, Mantis, and Shindaiwa.
This is a clutch drum that goes next to the circlip in many types of lawn and garden equipment created by Echo. This part is made of metal, but it can still break, in which case it will need to be replaced. The drum attaches to the driveshaft and houses the shoes that attach to the flywheel of the equipment. If the clutch drum is broken or damaged, it can cause the head of the tool to spin even when the engine is idle. It can also prevent the head from spinning at all.If the clutch drum needs to be replaced, the tool should be placed on a sturdy surface before disconnecting the spark plug wire. A hex wrench will be needed for the process. Gain access to the clutch drum screw and unscrew it so it can be removed. Once it is out, the new clutch drum can be installed into the equipment.This clutch drum is sold as an individual part. It is an authentic OEM replacement part that is sourced directly from the manufacturer. This part is designed for use with string trimmers, pole prunes, edgers, and hedge trimmers manufactured by Echo.
This ball bearing is located in the gear or fan case of different types of lawn equipment including edgers and trimmers. The ball bearing allows the clutch drum to rotate within the case while staying in a fixed position. With regular use, the ball bearings can wear down or seize up. Common signs the ball bearings need to be replaced are blades that won't work or a noisy gearcase. In either event, the machine will need to be taken apart and the ball bearings will require a replacement.Before beginning a replacement of the ball bearing, make sure to put on gloves and collect tools including a screwdriver, pliers, and a socket set. Emptying the fuel tank is recommended for safety. Remove locking nuts on the trimmer. Remove blade guard, washers, and tip guard. Remove screws on the gear case cover. Take apart all blades and gears. Use snap ring pliers to pull out the retaining ring and pull out the clutch drum. Internal snap ring pliers are used to remove the ball bearing drum to access the ball bearings. Remove old bearings and replace them with new ones before reassembly.This ball bearing is a genuine OEM replacement part. It can be used in various trimmers and edgers manufactured by Shindaiwa and Echo. The part is sold individually. For some repairs, two bearings may be required.
This is a genuine replacement bolt that is designed for use with select trimmers and brush cutters. The metal hex screw is generally found on the starter cover and used to secure the cover to the trimmer to protect the internal engine components. Although the screw is durable, it can become damaged due to impact or another incident. It may also be lost in the process of other repairs or maintenance. It will need to be replaced with an OEM model like this screw for the best results. This 4x16 screw is manufactured by Shindaiwa and compatible with select machines from the brand, as well as those from Little Wonder and Echo. This metal screw is sold as an individual unit and does not include any additional parts or accessories. Replacing the starter cover screw is generally a simple task. Allow the engine to cool and disconnect the power supply. Then, use an Allen wrench to remove the old screw if it isn't already missing. Install the new screw and the job will be done. It is important to wear gloves and use the right size hex key to ensure that the screw doesn't get stripped during installation.
This is an engine cover that is used on many types of lawn and garden equipment. The part can be tightened onto the tool to shield and protect the engine from debris or other items that might damage it. It's made of durable materials but can experience wear and tear over time or suffer other damage while in use or if it impacts other items. If the engine cover is cracked, broken, or it otherwise just isn't working as well as it used to, the part will need to be replaced.Visually inspect the engine cover for damage like cracks to determine whether it needs to be replaced. Take the housing off of the tool, disengage the throttle line, and unscrew the screws. Take off the old engine cover and replace it with the new component. Put the screws back in and tighten them before replacing the other components on the tool.This engine cover is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. This engine cover is designed to be used with hedge trimmers, edgers, pole pruners, and string trimmers manufactured by Echo.
The replacement screw seen here is a standard piece of hardware that could have multiple applications for various machines. The screws are often found in outdoor equipment for the lawn and garden. Screws have a simple but important function. They are used to help keep different parts of the machine together and can often help to reduce noise and vibration that could otherwise occur. Screws could need to be replaced for many different reasons. When taking apart the machine to reach or repair other areas, the screws might become lost and will need to be replaced. Other times, the screws could become bent or there could be issues with the threads. They could also break or be damaged by corrosion. This is a genuine OEM replacement screw from Echo that is sold individually. The screw can work with many models of lawn mower, string trimmer, edger, hedge trimmer, chainsaw, pole pruner, and leaf blower. Compatible brands include Little Wonder, Echo, and Shindaiwa.