Need Help?
Call or text
Show parts
Usually ships within 4 - 14 days
This nut is most commonly used with gas-powered chainsaws. The nut is used with a bolt, which is sold separately, to secure the carburetor and air filter together. It is a fastener that comes with a threaded hole. The bolt helps fight against rotation and vibrations that can pull the nut loose.Nuts can experience wear and tear and may become damaged or broken over time. If the nut has broken in half, has significant damage, or has been exposed to corrosive materials, it will need to be replaced. A wrench can be used to remove the damaged nut. Once that nut is removed, the new replacement part can be installed. Make sure to use work gloves and tighten the nut before using the lawn and garden equipment in the future.This is a genuine replacement part that is directly sourced from the manufacturer. It can be used with a variety of chainsaws, string trimmers, edgers, hedge trimmers, leaf blowers, and brush cutters created by Poulan, Poulan Pro, Craftsman, and Husqvarna. It is sold as an individual component. This part is sold individually.
This high quality choke lever is used on string trimmers and edgers from multiple manufacturers. The plastic choke lever actuates the choke valve which creates a limit to the amount of air that can enter the engine when the equipment is cold started. If the choke lever has been damaged or is broken, it may create problems with starting the tool. If this is the case, the choke lever will need to be replaced.This is a simple replacement project that requires only a screwdriver and a pair of work gloves. Before starting, make sure the tool is turned off and the spark plug wire has been removed. Place the tool on a flat surface and take out the choke lever. The broken choke lever can be removed using the screwdriver. The new replacement choke lever can be installed before tightening the screws and using the equipment again.This is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The choke lever is made for use with edgers and string trimmers manufactured by Craftsman, Husqvarna, and Poulan.
This is a replacement purge bulb. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a broken or defective purge bulb on various models of outdoor power equipment. The purge bulb purges air from the carburetor and draws in fuel from the fuel tank to allow the engine to start. Over time, the purge bulb can crack or become brittle, requiring replacement. Proper tools are required to replace this part and work gloves are advised. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near an engine, ensure the equipment is turned off and completely cooled down before starting any repairs. For more accurate information on how and where to install this purge bulb, the appropriate owner's manual and included diagrams should be referenced. As an authentic replacement part, this purge bulb is suitable for use on several different models of small engine power equipment such as string trimmers, leaf blowers, and edgers manufactured by Husqvarna, Craftsman, WeedEater, and Poulan. This is a genuine part made of high-quality, durable, non-corrosive materials and is sold individually.
This replacement part is a gasket and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This gasket is specifically found in trimmers and brush cutters. Gaskets are an important part of the engine in many machines. This part helps the engine start and stop as well as run smoothly. A new gasket might be needed if the engine is not able to start or stop and is not running smoothly. The gasket might be to blame if there are unusual noises coming from inside the machine. If the current gasket is visibly damaged or missing, it is recommended that it be replaced as to not cause any further damages. Be sure the engine is powered down before attempting to replace any parts.This gasket is sold individually and is a genuine OEM replacement part. This part is also sourced directly from the manufacturer to ensure a proper fit.
This part is a replacement carburetor adapter. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. It is intended to replace a defective or broken carburetor adapter in various models of line trimmers.The carburetor adapter is found between the engine cylinder and the carburetor itself. It's critical for proper equipment functionality and thus will need to be replaced if rendered faulty in any way. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this carburetor adapter, the appropriate owner's manual and equipment diagrams should be referred to. This carburetor adapter is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with line trimmer models that have been manufactured by Husqvarna, Poulan, and other brands.
The starter pawl bridge provides the resistance for the starter rope that is required to fire the engine. The bridge connects to the flywheel and is responsible for making it spin when the starter rope is pulled. Over time, the pawl can become worn with use. In the event that other starter components go bad, those can also damage the pawl. If the flywheel does not engage, it may be a faulty pawl. Always use gloves when replacing engine components and be certain to disconnect the spark plug before working on any engine parts. This OEM starter pawl bridge is manufactured to exact standards and is made by Husqvarna. It is compatible with select Husqvarna and Jonsered trimmers. This durable replacement part is made of metal and sold individually.
A fuel line fitting connects two separate sections of the fuel line. Over time and continued use, even durable fuel lines can become cracked, split, or broken, leading to leaks and the need for repair. If you have a fuel line that is separated or severely damaged, a fuel line fitting can be used to make a simple repair that can save you time and money. Depending on where in the equipment the damaged fuel line is, the repair steps can vary. Several fuel line fittings may be needed depending on the severity of the equipment’s damage. This repair will require a nut driver, forceps, a pair of pliers, screwdrivers, and a socket set to complete. This plastic fuel line fitting is compatible with numerous small engines for lawn and garden maintenance like leaf blowers, hedge trimmers, or chainsaws that are manufactured by many brands, like Husqvarna, Jonsered, Poulan, and Weed Eater. This fuel line fitting is a genuine OEM part.
This is a 25-inch long fuel line for use with various outdoor power tools and equipment that include small engines. Known as a fuel hose, fuel tube, or pick-up tube, the fuel line delivers fuel from the tank to the carburetor. It is made of flexible translucent plastic to prevent splitting and kinking. Over time, the fuel line can become brittle, cracked, or clogged. When a crack or clog develops, fuel can leak out and make it difficult to start the engine. A leak can cause damage to the motor and the equipment, create performance issues, and even become a safety hazard because of the flammability of the fuel. Replacing a worn-out or cracked fuel line is easy and takes 30 to 60 minutes to complete. Disconnect the old fuel line from the carburetor and the fuel grommet, then replace it with the new line. This replacement part works with different outdoor power tools like the chainsaw, edger, hedge trimmer, leaf blower/vacuum, pole pruner, and pole saw. It is compatible with popular brands like Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater. It is an OEM replacement part sourced directly from the manufacturer and is sold individually.
The Fuel Pick Up Assembly is an OEM part for Husqvarna outdoor power equipment, including chainsaws, trimmers, and blowers. This assembly is responsible for drawing fuel from the tank to the carburetor, ensuring the engine receives a steady supply of fuel for optimal performance.
Over time, the fuel pick up assembly can become clogged or damaged due to debris in the fuel, exposure to ethanol-blended gasoline, or regular wear and tear. If the fuel pick up assembly is compromised, it can lead to poor engine performance or difficulty starting the equipment.
Symptoms of a bad fuel pick up assembly include:
This OEM Husqvarna part ensures proper fuel delivery and compatibility with your outdoor power equipment.
This replacement screw is OEM and has been directly sourced from the manufacturer. The screw is used in many machines, including lawnmowers, tractors, tillers, and other lawn and garden equipment.These screws will be subject to normal wear like any other part. They should be inspected every year before using the equipment for rust or to see if any have fallen out or broken off. If any extra motion from the deck or the engine is noticeable, check the screws to ensure they don't need to be tightened. Failure to do so can cause damage to the mower and cause other parts to need replacement. Before checking the screws, make sure the mower has cooled off enough to touch. Letting the mower cool for a couple of hours is best to avoid burns. The screws can be tightened with a screwdriver. The screw is a genuine OEM replacement part. It is designed to be used with Husqvarna, Craftsman, Troy-Bilt, Cub Cadet, Poulan, Mcculloch, and Jonsered machines.
This part is a replacement screw. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a defective, misplaced, or stripped screw in outdoor power equipment. Screws are a standard piece of equipment hardware with different uses. They help to secure parts of the equipment together properly. If a screw becomes corroded, stripped, misplaced, or is otherwise defective, then it should be replaced. Wear work gloves and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this screw, the appropriate owner's manual and equipment diagrams should be referred to. This screw is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with small engine outdoor power equipment models that have been manufactured by MTD, Craftsman, and other brands.
This screw is designed to be used with a range of handheld land and garden tools. The screw is a common piece of hardware used to fasten various parts of equipment and machines. Screws can be used for a range of applications depending on the equipment.Screws are meant to last, but they can wear down over time. The threads of the screws may become damaged or worn away. The screw could break or become corroded. When working on the machines, it is also possible for the screws to become lost. Having extra on hand can be a good idea. Replacing the screw is a simple project.This screw is intended for use with blowers, edgers, gas trimmers, and other trimmers. It is compatible with models from a variety of brands including Poulan, Husqvarna, Weed Eater, and Jonsered. Each screw is sold individually. This is a genuine OEM replacement screw that has been sourced from the manufacturer.
The Driver Spring is an OEM part for Husqvarna power equipment. It plays a crucial role in the mechanism of devices such as lawn mowers or trimmers, where it helps to transfer force efficiently within the engine or motor, facilitating smooth and effective operation. This spring is designed to maintain optimal tension and functionality under the stresses of regular use.
Symptoms of a bad Driver Spring include:
Causes of a bad driver spring can include metal fatigue from repeated stress, corrosion due to exposure to moisture and chemicals, or improper installation leading to premature wear.
Maintaining this part in good working condition is essential for the reliability and longevity of your Husqvarna equipment.
This is a drive starter pulley that is used with several Husqvarna trimmers and brush cutters. It is made of durable plastic and comes in a white color. The driver starter pulley is part of the recoil starter system and plays an integral part in the operation of lawn and garden equipment. The purpose of this component is to engage the starter pawl so the equipment can be appropriately used for lawn needs. If the part is damaged, broken, or lost, it will need to be replaced.When replacing the driver starter pulley, a set of basic tools and a pair of work gloves may be needed. Take the lawn and garden equipment and place it on a level surface after making sure it is powered off. Next, disconnect the spark plug wire so the engine cannot engage while making the replacement. Disassemble the machine to get access to the broken part. Remove it from the tool and replace it with a new component.The drive starter pulley is designed to be compatible with brush cutters and trimmers manufactured by Husqvarna. The part is sold on an individual basis. It is a genuine OEM replacement part that is sourced directly from the manufacturer.
Combustion engines are quite loud by nature, and their sound and emissions are toned down through the use of a muffler system. In small engines, the muffler often attaches directly to the cylinder to capture the gases and reduce noise. Should that connection weaken or loosen, a replacement bolt may need to be installed to ensure a tight seal and optimal engine performance. This replacement muffler bolt is meant to be installed on edgers, blowers, trimmers and pruners from brands like Poulan, Jonesred, Weed Eater and Husqvarna. This is an OEM replacement part and is going to be responsible for fastening the machine's muffler to the cylinder. It will require the proper hex key to install properly and is considered an easy repair frequently required on many small machines.
This part is discontinued by the manufacturer and is no longer available for purchase.
This is an authentic OEM replacement ignition module built specifically for Husqvarna lawn appliances. An ignition module, also known as an armature-magneto, is an essential part of a combustion engine's ignition. The ignition module creates pulses of high voltage electricity that the spark plug uses to generate a charge and start the ignition. Without a functional ignition module, the spark plugs and ignition will not engage. The most common reason for an ignition module to break is if the spark plugs have gone bad or are missing from the ignition. The charge generated by an ignition module is quite high, so if the spark plugs are not in place to receive the charge, the high voltage can fry and melt the module. If the spark plugs are not receiving a spark but can carry a charge, the odds are that the ignition module has been fried and will need to be replaced. To make this repair, use a wrench set and screwdriver. Although this high-quality replacement part is designed specifically for Husqvarna appliances, it may also work with some Jonsered appliances, too. It comes sourced from the original manufacturer and does not include any additional hardware.
This replacement part is a screw and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Screws are an important part of many different types of machinery as they hold other parts in place and secure. A new screw might be needed if the current ones are loose or missing. It is common that screws might become stripped overtime and will need to be replaced. Be sure to double check the size of the screw as many places on lawn equipment will require different size screws. Be sure the appliance is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.
This genuine Husqvarna replacement part is a clutch drum assembly for use with trimmers and brush cutters.A properly functioning clutch drum assembly is essential for the safe and reliable use of a trimmer or brush cutter. The clutch drum works with the clutch to help the engine maintain an idle without rotating the head of the trimmer. The clutch drum may become worn out or damaged due to extended use, necessitating replacement. Remember to check the clutch drum periodically to spot any wear or damage. This part is an identical replacement for a clutch drum that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. Additional tools may be required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and is sold individually. It is made of high-quality durable metal. This part is compatible with a variety of Husqvarna, Jonsered, and more trimmers and brush cutters. Please note: original part numbers 530150039 , 530150039 , and 5301500-39 are now obsolete, and manufacturer has replaced the original part numbers with this part.
The clutch assembly is located in the clutch drum and connected to the drive shaft of the motor. This part is what allows the engine to idle without actually driving the cutter on lawn and garden equipment. The clutch is constantly engaged, so it can wear out over time and eventually need to be replaced. It may also become damaged in a direct impact or incident. If the clutch assembly fails, this could impact the ability of the engine to idle properly or even to remain running once it's started. This replacement part can offer an exact fit for compatible engines. This OEM clutch assembly is manufactured to high standards by Poulan and is designed to be compatible with various machines from Poulan, Weed Eater, Jonsered, and Husqvarna. The clutch assembly is a replacement part for various trimmers and pruners from the brands listed above. Replacing the clutch will require a wrench, screwdriver, pliers, and socket set. Be sure to cool the engine completely and wear gloves when doing repairs on lawn and garden equipment for safety.
This replacement part is a flywheel. This is a genuine replacement part made by Husqvarna. This part is a heavy wheel that is attached to the motor in the engine. The flywheel regulates the speed of the machine and stores excess energy during use. A new flywheel might be needed if the current one is visibly damaged or no longer spinning. If the engine seems to be working intermittently, it might be a problem with the flywheel. Be sure the engine is powered off during this repair as the spinning mechanisms can cause injury if precautions are not taken. Refer to the owner's manual for more information about how to replace this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.
This wrist pin retainer is an essential component that is used to secure the piston pin in many types of handheld lawn and garden equipment. The pin is made of durable metal, but if it is missing or has become damaged, the part will need to be replaced. A wrench set, screwdriver, and pliers will be needed to make the replacement. To replace the wrist pin retainer, get access to the piston and then take off any keeper rings included. Use tools to tap on the wrist pin retainer to make it come loose and take it out of the equipment. The replacement can be inserted into the same place and the equipment will need to be reassembled.This is a genuine OEM replacement part that is sourced directly from the manufacturer. The wrist pin retainer is designed to be used in trash compactors, string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, pole pruners, and carpet cleaners manufactured by Turf King, Craftsman, Paramount, Husqvarna, Broan, Weed Eater, Poulan, and Poulan Pro. The part is sold individually.
A combustion engine will create a lot of pressure by igniting fuel and air with a spark. It features pistons beneath the valves and the cylinder block. Between these areas are the piston rings that have many purposes that include keeping gas compression between the piston and the wall of the cylinder, keeping a layer of lubrication on the inside of the engine, allowing adequate heat transfer, and supporting the piston inside the cylinder. This replacement piston ring is designed for use in a long list of edgers, trimmers, and blowers. It is compatible with Husqvarna, Poulan, and Craftsman machines. This is an OEM replacement part that will require a complex set of steps to install properly. It will require the use of torque wrenches, plug wrenches, pliers, screwdrivers, a mallet, and more to do the repair. It ships individually.
This replacement part is an piston and cylinder kit and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Piston and cylinder kits are very important to many different types of machinery. This part ensures that there is a seal inside the engine that prevents leakage of certain gasses. This part also keeps oil from seeping into the combustion chamber of the engine. A new piston and cylinder kit might be needed if the equipment is unable to start or if it stops working while in use. It is common that piston and cylinder kits become stripped overtime due to normal wear and tear. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual.This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.
This is a replacement carburetor for Husqvarna string trimmers and is also used on some Craftsman models. It consists of an aluminum body with a bright blue choke and cherry red primer bulb. Engines rely on a mixture of fuel and air for proper operation. In a small engine, the fuel and air mix inside the carburetor. This is achieved with a series of small channels, which release a fine mist of fuel into a vortex of air. When one of these channels gets clogged, it can negatively impact engine performance. Carburetors can often be cleaned with a commercial carburetor cleaning spray, but this is sometimes not sufficient to clean a badly clogged carburetor. In this case, other measures such as hypersonic cleaners can often be effective, but they’re not always worth the cost. The alternative is replacing the entire carburetor, which can be done using this kit. This is an OEM part sourced directly from the manufacturer, and it is sold individually. A heat shield is also included with the kit.