Parts for Poulan BV2126: Cylinder / Muffler / Piston Parts

Combustion engines are quite loud by nature, and their sound and emissions are toned down through the use of a muffler system. In small engines, the muffler often attaches directly to the cylinder to capture the gases and reduce noise. Should that connection weaken or loosen, a replacement bolt may need to be installed to ensure a tight seal and optimal engine performance. This replacement muffler bolt is meant to be installed on edgers, blowers, trimmers and pruners from brands like Poulan, Jonesred, Weed Eater and Husqvarna. This is an OEM replacement part and is going to be responsible for fastening the machine's muffler to the cylinder. It will require the proper hex key to install properly and is considered an easy repair frequently required on many small machines.

This spark plug is a genuine Husqvarna part, sold individually. This spark plug can be used as a replacement part for tillers, string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, and pole pruners.Spark plugs in outdoor appliances such as these might have to be replaced if they are not functioning as usual. If the ignition system is not working, if the spark plugs are not igniting in the first place, or if the spark plugs are igniting but the engine is not powering on, it is likely that the spark plugs are damaged and should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This spark plug is compatible with the following outdoor appliance brands: Husqvarna, Stihl, Craftsman, Weed Eater, Toro, Cub Cadet, Ryobi, Homelite, Poulan, Wheel Horse, Tecumseh, Tanaka, Black Max, and Green Machine.

This screw is a genuine Husqvarna part. A screw can be used as a replacement part in leaf blowers, hedge trimmers, and chainsaws. The purpose of this genuine OEM part is to rotate into one or more components so that the stability of those components is maintained within the internal or external machinery of one of these appliances.The screw is a small fastening component that can be easily lost or misplaced at any point during the standard lifespan of an lawn equipment due to its size. The screw can also be subject to damage that can necessitate a complete replacement with this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This screw is compatible with equipment manufactured by Husqvarna, Craftsman, Poulan, Poulan, Pro, and Snapper.

This carburetor kit is for use with several gas-powered handheld leaf blowers. It is an internal part of the equipment. The main job of the carburetor is to ensure gas and air are mixed in the correct amounts before sending that mixture into the engine. If the carburetor is damaged or broken, it may cause the equipment to run rough, leak fuel, create extra vibrations, or refuse to start. When a carburetor is damaged, it will need to be repaired or replaced.If the engine refuses to start on the leaf blower and the tank has fuel, the carburetor should be tested. This will determine whether it requires replacement. Add a small amount of fuel to the carburetor after removing the air filter. Tug on the starter rope and see if the leaf blower comes on. If it does but dies soon after, the carburetor should be replaced. The carburetor kit comes with a metal carburetor, two gaskets, and a throttle lever.This carburetor kit is designed for use with leaf blowers manufactured by Craftsman, Poulan, and Husqvarna. It's an authentic OEM replacement part directly sourced from the manufacturer. This kit is sold as an individual item.

A primer bulb is a small rubber button-like component. This essential part pulls fuel through the fuel line and helps fill the carburetor with the right amount of fuel. Pressing the primer bulb will start the fuel flow and combustion. The primer bulb makes starting the engine easier, and without it, undue stress will be placed on the carburetor. There should be a slight resistance when pushing it and it should pop back out after depressing it. If the primer bulb is cracked or is not creating proper suction, replacement is necessary. The rubber material will eventually harden and crack over time. Stale fuel can also cause primer bulb deterioration. To replace a primer bulb, it is best to consult the equipment's manual for diagrams that show the bulb's placement. This is an OEM part made from high-quality material and is manufacturer-approved for use as a replacement. It can be used in lawn maintenance equipment such as string trimmers, leaf blowers, chainsaws, and pole pruners from brands like Craftsman, Husqvarna, Weed Eater, Poulan, and Poulan Pro.

This nut is most commonly used with gas-powered chainsaws. The nut is used with a bolt, which is sold separately, to secure the carburetor and air filter together. It is a fastener that comes with a threaded hole. The bolt helps fight against rotation and vibrations that can pull the nut loose.Nuts can experience wear and tear and may become damaged or broken over time. If the nut has broken in half, has significant damage, or has been exposed to corrosive materials, it will need to be replaced. A wrench can be used to remove the damaged nut. Once that nut is removed, the new replacement part can be installed. Make sure to use work gloves and tighten the nut before using the lawn and garden equipment in the future.This is a genuine replacement part that is directly sourced from the manufacturer. It can be used with a variety of chainsaws, string trimmers, edgers, hedge trimmers, leaf blowers, and brush cutters created by Poulan, Poulan Pro, Craftsman, and Husqvarna. It is sold as an individual component. This part is sold individually.

This air filter is a genuine Husqvarna part, sold individually. This air filter can be used as a replacement part in a leaf blower. The purpose of the air filter in a leaf blower is to protect the internal machinery of the appliance from the accumulation of debris, which, without a proper air filter stationed in its stable placement, could enter the appliance and cause any scale of damage to the internal components of the machinery.If the air filter is ripped, torn, dented, punctured, scraped, warped, or eroded to the point that external materials can easily pass through it, the air filter should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This air filter is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

This ignition module is a genuine Husqvarna part, sold individually. This ignition module can be used as a replacement part in a leaf blower. The purpose of the ignition module in a leaf blower is to fire up the spark plugs in the blower.If the spark plugs are not igniting after being fed the proper mixture of air and fuel from the carburetor or if the ignition module has suffered physical damage at some point, the ignition module might have to be removed and replaced by this genuine OEM replacement part so that the leaf blower can be properly used by the operator.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This ignition module is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

A combustion engine will create a lot of pressure by igniting fuel and air with a spark. It features pistons beneath the valves and the cylinder block. Between these areas are the piston rings that have many purposes that include keeping gas compression between the piston and the wall of the cylinder, keeping a layer of lubrication on the inside of the engine, allowing adequate heat transfer, and supporting the piston inside the cylinder. This replacement piston ring is designed for use in a long list of edgers, trimmers, and blowers. It is compatible with Husqvarna, Poulan, and Craftsman machines. This is an OEM replacement part that will require a complex set of steps to install properly. It will require the use of torque wrenches, plug wrenches, pliers, screwdrivers, a mallet, and more to do the repair. It ships individually.

This wrist pin retainer is an essential component that is used to secure the piston pin in many types of handheld lawn and garden equipment. The pin is made of durable metal, but if it is missing or has become damaged, the part will need to be replaced. A wrench set, screwdriver, and pliers will be needed to make the replacement. To replace the wrist pin retainer, get access to the piston and then take off any keeper rings included. Use tools to tap on the wrist pin retainer to make it come loose and take it out of the equipment. The replacement can be inserted into the same place and the equipment will need to be reassembled.This is a genuine OEM replacement part that is sourced directly from the manufacturer. The wrist pin retainer is designed to be used in trash compactors, string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, pole pruners, and carpet cleaners manufactured by Turf King, Craftsman, Paramount, Husqvarna, Broan, Weed Eater, Poulan, and Poulan Pro. The part is sold individually.

This is a screw used with many kinds of lawn and garden equipment, such as leaf blowers and string trimmers. The screw can be used to attach components together on its own or with the use of a nut. When using a nut with the screw, it should have the same threading and finish as the screw. Wear and tear or breakage can happen with screws over time and will lead to the need to replace them.Corrosion, hot temperature, and stress may all create weakness in a screw. This can cause it to become brittle, loose, or even broken outright. A visual inspection of the screw will give an indication of whether it needs to be replaced with a new one. If a replacement is required, a screwdriver can be used to remove the screw before placing a new one in the same location.This screw can be used with string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, and pole pruners manufactured by Paramount, Poulan, Poulan Pro, Weed Eater, Husqvarna, and Craftsman. It is sold as an individual part. The screw is a genuine OEM replacement part sourced directly from the manufacturer.