Poulan Leaf Blower Parts

Here is a replacement piston kit for use with handheld lawn and garden equipment engines. The pistons in an engine are essential to transfer combustion power to the various working parts of the machine. Pistons might need to be replaced if they have suffered any sort of damage or corrosion. There are several parts to the system including the piston, rings, wristpin, and circlips. The damage or wear and tear could occur in any of these different parts. When replacing a piston, it is a good idea to replace all of the parts of the kit, not just the part that is having issues. This authentic OEM piston kit is compatible with string trimmers, leaf blowers, hedge trimmers, pole pruners, and edgers. It is sold individually and is compatible with Husqvarna, Craftsman, Poulan, Poulan Pro, and Weed Eater brands. Owners buying a piston kit need to be sure they are getting the right part for their make and model.

This airbox cover is a genuine Husqvarna part, sold individually. This airbox cover can be used as a replacement part for a leaf blower or a leaf vacuum. This airbox cover serves as a housing and a protection for the air filter of the leaf blower or leaf vacuum; the air filter protects the internal mechanisms of these appliances from accumulating dirt and debris.The airbox cover might have to be replaced at some point within the standard lifespan or a leaf vacuum if it can no longer protect the air filter from damage. This could occur if the airbox cover undergoes damage in the form of punctures, tears, rips, scrapes, or erosion to the plastic material. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This airbox cover is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

The Fuel Pick Up Assembly is an OEM part for Husqvarna outdoor power equipment, including chainsaws, trimmers, and blowers. This assembly is responsible for drawing fuel from the tank to the carburetor, ensuring the engine receives a steady supply of fuel for optimal performance.

Over time, the fuel pick up assembly can become clogged or damaged due to debris in the fuel, exposure to ethanol-blended gasoline, or regular wear and tear. If the fuel pick up assembly is compromised, it can lead to poor engine performance or difficulty starting the equipment.

Symptoms of a bad fuel pick up assembly include:

• Engine not starting or hard to start
• Engine stalling or running inconsistently
• Reduced power or performance
•  Visible damage or clogging in the fuel line

This OEM Husqvarna part ensures proper fuel delivery and compatibility with your outdoor power equipment.

The starter spring is what is used to create the recoil to start the engine on pull-start chainsaws, blowers, trimmers, and other lawn equipment. When the starter handle is pulled, the rope extends and pulls on the spring, causing it to tighten and then release, which creates the action to fire the motor. It may also be called the recoil spring, rewind spring, or return spring, but they all refer to the starter spring. Over time, this can become worn with use, and in some situations, it can even break completely. If the starter rope will not rewind into the housing, the spring may be twisted and need to be replaced. If so, this genuine OEM starter spring will do the job for compatible machines. This model is manufactured by Husqvarna and compatible with various Poulan and Husqvarna lawn equipment. This spring may serve as a replacement for many machines including blowers, hedge trimmers, grass trimmers, chain saws, and saws. Check the user manual for compatibility and fit, as well as part numbers. Be sure to install this according to all instructions and diagrams for safe and proper operation.

An ignition module works in conjunction with the flywheel to create an electric current. It sends the voltage to the spark plug at a precise time to ignite the fuel and air mixture in the cylinder. An ignition module does not have moving components, but exposure to heat can cause damage over time. There are several warning signs that the ignition module has failed. The most common ignition module related problem is engine sputtering. If the damage is severe, it may cause total engine start failure. This is an original Husqvarna ignition module replacement. This part is compatible with string trimmers, pole pruners, hedge trimmers, and leaf blowers from Craftsman, Poulan Pro, Weed Eater, and Poulan. It is sold individually. Other components are not included in this ignition module replacement.

The starter pawl bridge provides the resistance for the starter rope that is required to fire the engine. The bridge connects to the flywheel and is responsible for making it spin when the starter rope is pulled. Over time, the pawl can become worn with use. In the event that other starter components go bad, those can also damage the pawl. If the flywheel does not engage, it may be a faulty pawl. Always use gloves when replacing engine components and be certain to disconnect the spark plug before working on any engine parts. This OEM starter pawl bridge is manufactured to exact standards and is made by Husqvarna. It is compatible with select Husqvarna and Jonsered trimmers. This durable replacement part is made of metal and sold individually.

This recoil starter spring is what retracts the rope back into the main starter assembly. When the rope is pulled, the spring expands. The release of the rope triggers a retraction, which pulls the rope in and activates the starter, creating the chain reaction that starts the engine. This spring can get twisted or become hyperextended with regular use, in which case the only solution would be to replace the entire spring assembly. This OEM recoil starter spring is manufactured by Husqvarna, with high-quality standards in mind. It is compatible with Poulan, Weed Eater, and Husqvarna machines, including trimmers, leaf blowers, edgers, and pruners. Owners should always consult their parts diagram or owner’s manual for exact part number compatibility. This durable metal spring is designed from high-quality materials and is sold individually. The starter rope and other parts of the assembly are sold separately. Always disconnect the spark plug and wear gloves when performing engine work.

This isolator kit is a genuine Husqvarna part, sold individually. This isolator kit can be used as a replacement part for a leaf blower or a leaf vacuum. This isolator kit affixes to the area in between the blower frame and the impeller housing. The kit includes fastening components such as isolators, nuts, and washers.This isolator kit might have to be replaced if these components are lost, misplaced, or damaged. Isolators, nuts, and washers can all be stripped over time, rendering them useless. They can be easily misplaced as they are small components that might go missing without affecting anything in the appliance. If this occurs, this isolator kit should be ordered as a genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This isolator kit is compatible with the following outdoor appliance brands: Husqvarna and Poulan.

This is a genuine engine cylinder that is designed for use in select outdoor power equipment. The cylinder is the part of the engine that houses the spark plug and piston, creating the combustion chamber that the engine needs to ignite the air-fuel mixture that runs the engine. The cylinder is exposed to high heat, excessive pressure, and chemicals that can all cause wear and breakage over time. In the event that the cylinder goes bad, it needs to be replaced immediately to prevent further engine damage. This OEM cylinder is manufactured by Husqvarna. It can be used in trimmers, blowers, edgers, and pruners from the brand, as well as from Poulan and Weed Eater. The cylinder is sold as an individual unit and does not include hardware or other parts or accessories. Replacing the cylinder takes a little more effort because it requires disassembling the engine. To replace the cylinder, remove the engine shrouds, and then remove the engine from its mount. From here, the cylinder can be removed from the block and the piston can be taken out. Then, the new cylinder can have the piston installed before being bolted into place. The accessories can be replaced and then the engine can be re-mounted.

This replacement starter spring is a genuine OEM model from Husqvarna. The starter spring, also sometimes called the recoil spring or recoil starter spring, is part of the entire starter assembly. It attaches to the fan and flywheel housing and is responsible for helping to retract the starter rope when it is pulled to engage the engine. Over time, the spring can wear out or become twisted. This can cause the starter rope to no longer retract or it can even seize up the entire starter assembly. Replacement of the spring is the only option and this OEM part can provide an exact fit for select engines. This part is designed for use with blowers, edgers, trimmers, and pruners that feature Husqvarna engines and that are manufactured by brands like Weed Eater, Poulan, and Husqvarna themselves. The starter spring is made of durable metal and is sold individually. Always disengage the spark plug and allow the engine to cool completely before beginning and repair projects, and protect the hands by wearing gloves.

This is a replacement leaf blower tube. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective leaf blower tube on a variety of different leaf blower models. This tube makes up part of the vacuum attachment assembly. It links the vacuum bag directly to the lower tube. This part can become worn with regular use and may require replacement. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this mulcher kit, refer to the appropriate owner's manual and included diagrams.As an authentic replacement part, this leaf blower tube is suitable for use on several different lawnmower models manufactured by Husqvarna and Craftsman. This is a genuine part made of high-quality, durable materials and is sold individually.

This authentic OEM part is a replacement foam air filter for a gas-powered leaf blower. For a gas-powered engine to work, it must maintain a balance of fuel and oxygen. This means it is constantly taking in air from outside the engine. However, working in dusty areas can cause a lot of debris to mix with the air. A foam air filter helps to catch that debris before it can clog up an engine. After an extended period of use, though, the filter will become clogged. Replacing a foam air filter is an easy repair that will only require a screwdriver. Remove the air filter cover, take out the old filter, and put in the new filter. This part works with gas-powered leaf blowers from Poulan, Weed Eater, and Husqvarna and is sourced directly from the original manufacturer. It ships individually.

A piston ring is a component located between a piston and a cylinder and helps the engine operate correctly. This component maintains gas compression between the cylinder wall and piston, makes lubricating oil to prevent scuffing, transfers heat from the crown of the piston to the cylinder, and prevents the piston from hitting the cylinder wall. There are several signs that a piston ring needs to be replaced. Excessive smoke may come out of the engine, oil may be used more rapidly, and your equipment might have a decreased performance without the power it used to have. If the engine is still in good shape, but the rings have lost their tension, replacing the piston ring is the best solution. Inspecting the cylinder for wear is also important since damaged piston rings can lead to cylinder wear. This piston ring is a genuine OEM product directly from the manufacturer. It comes as an individual part. It can be used on hedge trimmer, leaf blowers, and trimmers from Husqvarna, Weed Eater, and Poulan. Several tools, including a screwdriver and wrenches, might be required to install the replacement part.

This is a leaf blower fan blade, also called an impeller. This is what creates the flow of air out of the machine that blows leaves, grass clippings, and other debris out of the way. Without this part, the leaf blower would be unable to move air at all. The leaf blower fan blade is subject to some wear and tear through normal use. It is also made of plastic and may degrade over time, eventually cracking. If the leaf blower is not moving air and the engine is running normally, this could be the problem. Replacing the leaf blower fan blade will require opening the blower motor housing. Locate the fan blade, remove the Torx screws, and then remove the old impeller. Install the new one, replace the screws, and then reassemble the housing. This replacement fan blade is made from plastic with a metal sheath/insert. Note that this is an OEM part, and it is sold individually. It fits over 44 different Craftsman and Husqvarna gas-powered leaf blowers.

The fuel filter is designed to clean the fuel before it enters the carburetor. This helps to catch dirt and debris that can get into the fuel line and build up over time, affecting the performance. When there is a clean fuel filter in place, the engine will run at peak performance. Over time, the filter will become dirty and clogged with debris and fuel residue, requiring replacement as a part of routine maintenance. This OEM replacement can get lawn and garden equipment back in shape in no time. Prior to the repair, make sure to disconnect the spark plug and drain the fuel. This genuine OEM fuel filter from Husqvarna is compatible with multiple models of engines. It can be used with chainsaws from Poulan, Jonsered, and Husqvarna, including more than 150 different models. This filter is sold as an individual unit.

This is an OEM replacement screw that is specifically designed to secure the fuel tank on select lawn and garden equipment. The fuel tank retainer screw is made of durable metal and will be screwed to the fuel tank and the body of the machine, holding the tank in place and preventing it from being exposed to excessive vibrations or potential spillage. These screws can become worn over time or be lost in the process of other repairs. This genuine OEM fuel tank retainer screw is compatible with hundreds of trimmers, blowers, edgers, and pruners. It can be used with select models of machines from Poulan, Husqvarna, Weed Eater, and Jonsered. Owners should check their parts diagram for exact placement and part number compatibility as fuel tank retainer screws come in different lengths and diameters, so they are model-specific. This screw is made of durable metal and will require a Torx driver to install. The fuel tank retainer screw includes a built-in washer and is sold as an individual unit. Those who need more than one will have to purchase multiple quantities.