Parts for Speed Queen ADEE9BGS173TW01: Cylinder Parts

Fix a dryer that won't detect fabric dampness or stop at the right time. This moisture sensor base secures sensing contacts for accurate cycle timing.

This replacement moisture sensor bar mounts inside the drum and helps the dryer detect when laundry is dry. A worn or damaged bar can cause sensor-dry cycles to end too soon or run too long.

• Senses moisture on fabrics and signals the control to advance or extend auto-dry cycles
• Helps stop the cycle when clothes reach the selected dryness level
• Symptoms can include auto-dry cycles ending early, extended run times, or inconsistent dryness
• Build-up on the bars can also affect sensing performance

• Disconnect power before servicing; shut off gas supply for gas dryers
• Access the sensor at the front bulkhead/lint housing; move wire leads to the new bar and secure with existing hardware
• Clean any residue from both sensor bars to improve accuracy
• Reassemble and test with a small damp load on a sensor cycle

This washer cylinder baffle mounts to the inner basket and lifts garments as the basket turns. Replacing a cracked, loose, or missing baffle restores proper turnover, reduces banging noises, and helps prevent fabric snags.

• Lifts and tumbles clothes for effective wash action
• Helps distribute the load to minimize imbalance and noise
• Guides garment movement for consistent wash action
• Common failure symptoms: loose or missing baffle, rattling/banging sounds, clothes catching or excessive wear

• Disconnect power and shut off water before servicing; wear cut-resistant gloves
• Open the door and rotate the basket to access the baffle fasteners; support the baffle while removing screws
• Align the new baffle with the keyed slots/holes and tighten the screws securely
• Manually rotate the basket to confirm clearance, then run a short test cycle to verify smooth operation

This is the main drum cylinder assembly for a residential dryer, finished in white. It is the large rotating chamber where clothes tumble during the drying cycle, and it includes the cylinder shell. Replace this assembly if the drum has cracks, dents, or interior coating damage that is snagging or staining clothes, or if excessive noise and wobbling indicate structural failure.

If your dryer drum is dented, corroded, or causing clothes to snag, this galvanized cylinder assembly restores smooth rotation and proper airflow.

If your dryer drum is dented, corroded, or causing clothes to snag, this galvanized cylinder assembly restores smooth rotation and proper airflow.

Flat stationary rack that installs inside the dryer drum for air-drying shoes, hats, and delicate garments without tumbling. Replace if cracked or broken.