Parts for Mtd 13APA1ZS099: Deck / Spindle Assembly Parts

This replacement part is for lawn mower spindles. Mower blades rotate on the spindle, and during eight hours of cutting, they might rotate almost 2 million times. That can put a great deal of wear and tear on the spindles, and they will eventually need to be replaced.Replacing this part takes between 30-60 minutes. A socket set and a butane torch are needed for this job. On the bottom side of the mower deck are three threaded screws to hold the spindle assembly to the deck. Use the butane torch to heat the screws then soak them with a nonflammable lubricant and remove each with a socket wrench. Then attach the new spindles. Note: the spindle holes aren't threaded so when screwing in the old screws, the screw will make its own new threads for a secure tight fit.This is an OEM part sourced directly from the manufacturer. It is sold individually.

This part is a right-hand brake assembly bracket that is used on lawn tractors. The brake assembly is the component that stops the blade from moving.A new right-hand brake assembly bracket may be needed if the existing bracket is cracked, broken, dented, bent, or damaged in any way. Use extreme caution when attempting to replace any components near the blade of a lawn tractor. Allow the lawn tractor to cool off completely prior to attempting any care or maintenance on any component. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This right-hand brake assembly bracket is a genuine MTD part. It is sold individually. This specific right-hand brake assembly bracket component is compatible with lawn tractors that are manufactured by Yard Machines, MTD, Craftsman, Columbia, Mastercut, Murray, Yard-Man, and Husky.

This deck brake assembly is a genuine MTD part, sold individually. This deck brake assembly can be used as a replacement part for a lawnmower. This deck brake assembly prevents the blades from continuing to rotate and function when the clutch lever is placed into its off position.If the clutch lever is disengaged and the blades are continuing to rotate, it is likely that the deck brake assembly is malfunctioning, damaged, or completely broken. If, upon a visual assessment and inspection, there is damage to the deck brake assembly in the form of puncturing, tearing, or erosion to the metal material, the component should be removed and replaced by this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This deck brake assembly is compatible with the following outdoor appliance brands: MTD, Craftsman, and Cub Cadet.

This replacement part is a screw. This is a genuine replacement part made by MTD. Screws are small but important to the overall workings of many appliances. Screws work with other small pieces such as nuts and washers to keep parts secure during use.A new screw might be needed if the current one is missing or damaged. This can be caused by normal wear and tear with years of use. Screws endure large amounts of friction over time and can become worn down. If this is the case, be sure the replace the part as it might not be as effective as normal. Refer to the user manual for specific directions on the replacement of this part. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

This hex cap screw is a genuine MTD part, sold individually. This hex cap screw can be used as a replacement part for a lawn mower. The purpose of the hex cap screw is to attach components to each other.Through general wear and tear over long-term use, a direct impact collision with a hard object, or exposure to the elements, the hex cap screw might be rendered beyond functionality. If this occurs, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This hex cap screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Murray, and Troy-Bilt.

This OEM screw is a fastener with a trimmed six-sided or hexagonal head plus a washer face on the bearing surface. It is one of the most commonly used fasteners. Considered standard hardware, this component has multiple applications and can be used on woodworking, machine assembly, and mechanical repair. The screw is 3/4 long and has a thread size of 5/16 -18. A hex cap screw is installed into tapped holes by turning the head to fit and tighten. This is the fastener of choice in applications where tight tolerance is necessary. This is a genuine factory part sourced from the manufacturer and is sold individually. It can be used with Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut brands of lawn maintenance equipment including lawn mowers, snowblowers, tillers, leaf blowers, log splitters, and wood chippers.

This hex screw is an authentic OEM replacement part sourced directly from the manufacturer. It is used in many different applications in lawn and garden equipment and can be used on many different machines. If the hex screw is missing or loose due to deterioration, a new hex screw should be installed. Hex head screws are removed and replaced using a hex wrench. Screws are used to secure one part of a machine to another part. This hex head screw is not self-tapping, it is designed for pre-drilled holes. Most applications will require a washer and bolt to secure the screw, but there are applications where the screw is inserted into parts that do not have an opening on the other side and so the screw does not need to bolt. Wear gloves when working with screws and outdoor equipment. This hex head screw is made of hardened metal and is sold as an individual unit. This hex head screw can be used on many different model machines manufactured by MTD, Ryobi, Murray, YardMan, Bolens, Cub Cadet, and Husky.

A flange nut's unique wide flange design distributes the nut's pressure over the part it is securing. In return, it creates an even fastening surface, which reduces part damage and nut loosening. This one-piece all-metal fastener has a lock nut version that features a protruding circular flange. This drastically increases bearing surface, compatibility either for irregular or oversized holes, and surface tension reduction. Flange lock nuts are the preferred type of fastener for many lawnmower models because it can provide better fastening than regular screws, which are known to loosen under extreme vibration. However, it’s important to know that flange lock nuts are susceptible to wear and tear due to constant vibration exposure. It is essential to replace the broken flange lock nut immediately to prevent serious damage to the lawnmower. The MTD 712-04063 Flange Lock Nut OEM replacement can be used with Craftsman, White Outdoor, Yard Machines, MTD, or Columbia lawnmowers. It is a genuine or OEM MTD replacement part that measures 5/16-18. It is threaded and requires the use of a wrench. This replacement flange lock nut is sold individually. An MTD bolt carriage may also be needed and is sold separately.

The nut-hex flange 5/8-18 features a hex nut with a wide flanged portion at one end. This flange will act as an integrated washer that does not spin. Since the flange acts as a washer, it ensures that the nut can fasten to the material's surface evenly. If any of these nuts are removed from a machine to do other work, it is recommended to replace them with a new nut-hex flange. Check the nuts that are currently on the machine at least once a year. Make sure they are properly tightened and that they are in good condition. Replace them as needed. This OEM part will work for many types of equipment, including lawnmowers, edgers, snowblowers, and lawn tractors. The part will work with many brands, including Ryobi, Poulan, Bolens, Yard-Man, MTD, Yard Machines, and Troy-Bilt.

This flange lock nut is a metal component used in many types of lawn and garden equipment. It is the part that attaches to the rear wheel to keep it steady on any kind of terrain. It can also be used on handles and chutes for some equipment. The nut size is 3/8 and it has a thread size of 16. Most flange lock nuts will last for years. In some cases, the silicone ring inside the nut will wear down when it is loosened and tightened. When this happens, the flange lock nut will start to move around. It can start as minor slippage but often gets worse over time. It will need to be replaced but this is a simple task. Regardless of what equipment it is attached to, it simply needs to be unscrewed. Take off the old nut and replace it with the new one. This flange lock nut is an authentic OEM product that is sourced directly from the manufacturer. It is sold individually. The lock nut is made for use with lawnmowers, wood chippers, and edgers manufactured by MasterCut, Yard-Man, Bolens, Craftsman, Cub Cadet, Murray, Troy-Bilt, Yard Machines, MTD, and Huskee.

This bow tie cotter pin is a genuine MTD part, sold individually. This bow tie cotter pin can be used as a replacement part in a lawn mower. The purpose of the bow tie cotter pin is to serve as a fastening part for one or more components of the lawn mower.This component is small and can be easily lost or misplaced. It can also be stripped or subject to other forms of damage as a result of general wear and tear from long-term use of the appliance. If the component is lost, misplaced, or damaged to the point that it can no longer serve as a fastening part, the bow tie cotter pin should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This bow tie cotter pin is compatible with the following outdoor appliance brands: MTD, Craftsman, Troy-Bilt, Murray, Yard Machines, and Cub Cadet.

This replacement part is a push cap and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This push cap is found in different types of lawn mowers and helps the user in switching settings during use. This part is small but important to the operation of many different appliances. A new push cap might be needed if the current one is damaged or missing. This part is frequently used so it is not unusual for it to become stripped or damaged and need replacing after years of normal wear and tear. This repair should be fairly simple and require only common household tools. It is recommended that work gloves be work especially if the previous part is damaged. This push cap is sold individually and is a genuine OEM replacement part. This part is sourced directly from the manufacturer to ensure a proper fit.

This extension spring is a genuine MTD part, sold individually. This extension spring can be used as a replacement part for a lawn mower or a lawn tractor. The purpose of the extension spring is to manage the placement of several components through spring tension.If the extension spring has been stripped, punctured, warped, or eroded to the point that it can no longer secure components through spring tension, it should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This extension spring is compatible with the following outdoor appliance brands: MTD and Craftsman.

This torsion spring is an authentic OEM replacement part sourced directly from the manufacturer. It is used to hold the idler pulley securely against the belt so that the belt can turn. Over time, the torsion spring may become worn and not function properly. If this happens, the belt will not turn, and the tractor will not run. The torsion spring should be replaced and the belt inspected for damage. Before replacing the torsion spring, make sure the tractor engine is cool. Remove the keys from the tractor and disconnect the battery terminals to prevent the engine from being started. Locate the idler pulley and loosen the screws holding it in place. This will loosen the belt so that it can be removed to access the torsion spring. Once the spring is located, remove it and install the new one. Reinstall the belt and tighten the idler pulley. Reassemble the tractor and reconnect the battery. Test the tractor to make sure the torsion spring is installed correctly. This torsion spring is a gold-colored metal part that is sold individually. This spring is designed to be tractors manufactured by MTD and Craftsman.

This replacement part is a shoulder spacer, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Shoulder spacers are found in many different parts in machines. Spacers allow for multiple parts to work together while diminishing friction inside or around the engine. A new shoulder spacer might be needed if the current one is visibly damaged or broken. If the user hears unusual noises coming from inside the machine, it is possible that a damaged or missing spacer is allowing two parts to rub against each other. Be sure the engine is powered off before replacing a spacer as the area could be dangerous to work near. Reference the user manual for more detailed instructions on how to replace this spacer. This is a genuine OEM replacement part and is sold individually. Some lawn mowers require more than one spacer so be sure to purchase the correct amount.

This is a two in one blade that can be used as a lift blade to bag clippings, as well as a side discharge for clippings. It is time to consider replacing this blade when there are uneven or even missed areas of cutting or bagging when using the mower. It may be that the blade has been dulled by prolonged use or bent or damaged by striking rocks and dense roots. Either way, replacing the blade is a relatively easy repair to make and should be considered a part of routine maintenance. The repair requires the use of the proper tools, including wrenches and sockets. An appropriate flange bolt may need to be purchased as well if the original has been damaged or worn. "This OEM replacement cutting blade works with more than 150 types of tractors and mowers made by Craftsman, Yard Machines, Yard-Man, MTD, and Troy Bilt. This ships singly and is a high-quality blade made of durable materials.

This replacement part is a pulley spacer intended for use in different lawn mowers. This is a genuine replacement part made by MTD. Pulley spacers allow the pulley to rotate while providing a gap so that friction does not build up inside the machine and create extra heat.A new pulley spacer might be needed if the current one is damaged or broken in any way. It is common for this part to be replaced after years of normal wear and tear. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. For more detailed instructions on how to replace this specific part, please reference the user guide.This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn mowers made by MTD.

This genuine replacement part is a V-belt for use with lawn tractors and riding mowers. It is also known as a lawn tractor blade drive belt. This V-belt is required for safe and reliable operation of the lawn mower or lawn tractor. This drive belt turns the pulley responsible for spinning the blades on the mower deck. If the V-belt is broken, the mower blades will not be able to turn. The V-belt can become worn or damaged through regular use, requiring replacement. It is recommended to check the V-belt once a year as part of a preventative maintenance plan. Prior to replacing this part, please refer to the original product manual for installation instructions. No tools are required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. This V-belt is compatible with Craftsman, MTD, Troy-Bilt, and more lawn tractors. Please note: original part number 754-05021 is now obsolete, and manufacturer has replaced the original part number with this part.

This part is a replacement idler pulley. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a defective or broken idler pulley in a variety of lawn tractor models. Idler pulleys help to guide the engine's drive belt. This part is subject to significant wear and tear over time and may require replacement. Signs that the idler pulley might need replacing include a squealing sound coming from the belt or the pulley being visibly worn. Proper tools are required to install this part. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this idler pulley, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this idler pulley is suitable for use on several different models of lawn tractors manufactured by MTD, Troy-Bilt, Yard Machines, Cub Cadet, Husky, and Yard Man. This is a genuine part made of high-quality, durable materials and is sold individually.

This idler pulley cap is a genuine MTD part, sold individually. This idler pulley cap can be used as a replacement part or a lawn tractor. The purpose of an idler pulley cap is to secure and protect the placement of the idler pulley so it can fulfill its key function of facilitating the tension and rotation of the drive belt. The idler pulley cap might have to be replaced if the component is lost, misplaced, or broken to the point that it falls off of the idler pulley or that it cannot protect the idler pulley. The idler pulley cap can be cracked, torn, ripped, or eroded, in which case it should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This idler pulley cap is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman, and Troy-Bilt.

This part is a replacement screw. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken, stripped, or lost screw in outdoor power equipment. Screws hold together components in the equipment and thus are essential. They will need to be replaced if lost, stripped, corroded, or otherwise unable to hold parts together securely. Screws are a standard piece of hardware that have many different uses. It's important when working on or near to any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this screw, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this screw is suitable for use on several outdoor power equipment manufactured by MTD, Craftsman, Troy-Bilt, Cub Cadet, Husky, and other brands. Please This is a genuine part made of high-quality, durable metal and is sold individually.

Here is a replacement shoulder screw that is commonly used for various types of outdoor power equipment. Another name for the shoulder screw is a shoulder pin. The screw is often used to help secure the plastic wheels to the deck of a machine. However, different machines may have different uses for shoulder screws and other types of hardware. The shoulder screw is made from metal and is durable. However, the pin may still need to be replaced at some point. Whether it is because of corrosion or being bent, it is important to replace a failed screw with a new one. When performing maintenance on the machine, it is also possible that the screw could become lost, which would require a replacement. This is a genuine OEM replacement shoulder screw. It is sold individually and works with many types of makes and models. The screw is often used for edgers, snowblowers, lawn mowers, and chainsaws. Brands that have models that will be compatible with the shoulder screw include Craftsman, Toro, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Huskee, Yard-Man, and MasterCut.

This is a genuine replacement shoulder screw that is compatible with select models of lawn tractors. The shoulder screw has multiple applications in lawn tractors, where it is typically used as some kind of axle for wheels or other components. Over time, this type of screw can become worn from repetitive motion or the threads can start to strip. If the screw fails or is unable to work effectively, it can affect whatever it is responsible for securing or holding, as well. This could result in the entire machine not working until a replacement is made. This is a genuine manufacturer's replacement manufactured by MTD. It is compatible with their lawn tractors as well as those from Yard Machines, Troy-Bilt, Yard Man, Husky, and Cub Cadet. The screw is made of durable metal and is sold as a single unit. This is considered specialty hardware and is also sometimes referred to as a shoulder bolt.

This is a replacement grass chute assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended to replace a broken or detached grass chute assembly on various lawnmower models. The grass chute assembly allows grass clippings to be efficiently discharged from the lawnmower. Over time, this part can experience wear and tear and may need replaced. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near an engine or lawnmower blades, ensure the equipment is powered off and completely cooled down before starting any repairs. Proper tools may be required to replace this part and work gloves are advised. For more accurate information on how and where to install this grass chute assembly, reference the appropriate owner's manual and included diagrams.As an authentic replacement part, this grass chute assembly is suitable for use on several different lawn mower models manufactured by MTD, Craftsman, and Cub Cadet. This is a genuine part made of high-quality, durable plastic and is sold individually.

This chute hinge pin is a genuine MTD part, sold individually. This chute hinge pin can be used as a replacement part in a lawn mower. The purpose of the chute hinge pin is to fasten components to the deck of the lawn mower. The chute hinge pin is a small component that can be easily lost or misplaced. It can also suffer damage at some point within the standard lifespan of the lawn mower, and if the damage is sufficient enough to render the component beyond functionality, the chute hinge pin should be removed and replaced by this genuine OEM replacement part. It is a simple replacement part that will require only a pair of pliers to properly execute. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This chute hinge pin is compatible with the following outdoor appliance brands: MTD, Craftsman, Troy-Bilt, Cub Cadet, Murray, Yard Machines, and Huskee.

This part is a hex cap screw that is used on a variety of outdoor power equipment. A hex cap screw is used to fasten components together securely. The head of the screw is shaped like a hexagon, hence the name "hex cap screw."A new hex cap screw may be needed if the current one is stripped, broken, or missing. Since screws are such a small component, it is important to place them in a safe place so that they are not lost. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This hex cap screw is a genuine Husqvarna part. It is sold individually. This particular hex cap screw is compatible with chippers, shredders, lawnmowers, lawn tractors, snowblowers, and vacuums that are manufactured by the following brands: Husqvarna, Craftsman, Bolens, Husky, Yard Machines, Yard-Man, MTD, and Troy-Bilt.

A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.

This belt keeper is a genuine OEM part that is sourced directly from the manufacturer for use on lawn mowers and lawn tractors to stabilize the deck belt and prevent excessive friction on the belt. If the belt keeper is damaged or missing, the belt may slip off the mower and cause the mower to stop cutting. Regular inspection of the belts will reveal any damage to the belt keeper that needs addressing. If the belt keeper is missing, screws will need to be purchased separately. Practice safe working practices when repairing the lawnmower. Remove the key and disconnect the spark plug. Wear safety gloves. Park the mower on a flat surface and lower the deck to the lowest position. Locate the deck belt guards and remove them from the mower. Remove the screws securing the belt keeper and take the damaged belt keeper off. Install the new belt keeper and use the screws from the original belt keeper to secure it to the mower. Reinstall the belt guards. Reconnect the spark plug. This belt keeper is a black metal part that is sold as an individual unit. It does not come with hardware. It is designed for use on lawn mowers and lawn tractors manufactured by MTD, Troy-Bilt, Yard Machines, Cub Cadet, and Yard-Man.

A ball bearing is a common type of rolling-element bearing. It will use balls to keep space between the bearing races and eliminate friction and contact between moving parts. Ball bearings used in lawn and garden equipment ensure that axial loads and radial loads are evenly supported and that there is only a limited amount of rotational friction on the component. It distributes weight evenly, but will undergo constant wear and tear from vibration, heat, and friction and will need replacement regularly. This ball bearing is a genuine OEM part suited to use in Craftsman, Cub Cadet, Ryobi, Troy-Bilt, MTD, Huskee, Yard Machines, Bolens, Mastercut, and Yard-Man equipment. It may be needed for repair work done on a lawnmower, snowblower, tiller, edger, or a log splitter.

This replacement part is a bagger and is intended for use with lawn mowers. This part is compatible with various kinds of lawn mowers. The bagger is responsible for collecting the leaves and other debris during use so that the user can clean up more easily. A new bagger might be needed if the current part is no longer working properly or is damage. If the part cannot stay attached to the lawn mower, it might be best to replace it altogether. If the bag has visible tears or rips, consider replacing this part as well. This should be a fairly simple repair. This is a genuine replacement part made by MTD, sold individually.

This part is a replacement mulch kit. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective mulch kit in a variety of lawn tractor models.The mulch kit converts the tractor to mulching mode, which allows is to shred the grass clippings and then expel them in order to mulch the ground. A mulch kit may be required for users who wish to return nutrients to the soil for better grass growth. When working on or near an engine, it's important to make sure the equipment is powered off and completely cool before starting any repairs. For more accurate information on how and where to install this mulch kit, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this mulch kit is suitable for use on lawn tractors manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.