Parts for Craftsman 247204380: Deck / Spindle Parts

Blades won't engage or uneven cutting? Replace worn spindle assembly. Handles 2 million rotations during 8 hours of cutting. Moderate DIY repair.

42-inch mower deck shell for riding lawn tractors. Replaces damaged, cracked, or rusted deck housing. Essential structural component for deck assembly.

Replace a faulty reverse wire harness if your lawn tractor won't go in reverse or has no warning beep. Fixes electrical issues in reverse function.

This part is a right-hand brake assembly bracket that is used on lawn tractors. The brake assembly is the component that stops the blade from moving.A new right-hand brake assembly bracket may be needed if the existing bracket is cracked, broken, dented, bent, or damaged in any way. Use extreme caution when attempting to replace any components near the blade of a lawn tractor. Allow the lawn tractor to cool off completely prior to attempting any care or maintenance on any component. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This right-hand brake assembly bracket is a genuine MTD part. It is sold individually. This specific right-hand brake assembly bracket component is compatible with lawn tractors that are manufactured by Yard Machines, MTD, Craftsman, Columbia, Mastercut, Murray, Yard-Man, and Husky.

Fix mower blades that won't stop spinning after disengaging the clutch. This deck brake assembly halts blade rotation when the clutch lever is off.

Oil draining slowly or leaking during changes? This oil drain valve ensures quick, clean oil changes on your lawn mower. Simple DIY install in minutes.

This replacement part is a screw. This is a genuine replacement part made by MTD. Screws are small but important to the overall workings of many appliances. Screws work with other small pieces such as nuts and washers to keep parts secure during use.A new screw might be needed if the current one is missing or damaged. This can be caused by normal wear and tear with years of use. Screws endure large amounts of friction over time and can become worn down. If this is the case, be sure the replace the part as it might not be as effective as normal. Refer to the user manual for specific directions on the replacement of this part. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

Hydraulic fitting adapter for lawn tractors and riding mowers. Connects hydraulic lines in the transmission system. Replace if cracked, leaking, or stripped.

Hex cap screw for lawn tractors and riding mowers. Secures components together. Replace if stripped, missing, or damaged from impact or wear.

Hex cap screw for securing components on lawn mowers, tractors, and outdoor power equipment. Replace if stripped, rusted, or missing hardware.

This OEM screw is a fastener with a trimmed six-sided or hexagonal head plus a washer face on the bearing surface. It is one of the most commonly used fasteners. Considered standard hardware, this component has multiple applications and can be used on woodworking, machine assembly, and mechanical repair. The screw is 3/4 long and has a thread size of 5/16 -18. A hex cap screw is installed into tapped holes by turning the head to fit and tighten. This is the fastener of choice in applications where tight tolerance is necessary. This is a genuine factory part sourced from the manufacturer and is sold individually. It can be used with Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut brands of lawn maintenance equipment including lawn mowers, snowblowers, tillers, leaf blowers, log splitters, and wood chippers.

Hex screw for lawn tractors and garden equipment. Replaces missing, loose, or deteriorated fasteners in various mounting applications across the machine.

Flange lock nut secures components on mowers and outdoor power equipment. Replace if stripped, corroded, or missing to restore proper fastening.

Replaces a stripped, damaged, or missing 5/8" hex flange nut on your lawn mower or snow thrower. Secures blades and other components with integrated washer.

This flange lock nut is a metal component used in many types of lawn and garden equipment. It is the part that attaches to the rear wheel to keep it steady on any kind of terrain. It can also be used on handles and chutes for some equipment. The nut size is 3/8 and it has a thread size of 16. Most flange lock nuts will last for years. In some cases, the silicone ring inside the nut will wear down when it is loosened and tightened. When this happens, the flange lock nut will start to move around. It can start as minor slippage but often gets worse over time. It will need to be replaced but this is a simple task. Regardless of what equipment it is attached to, it simply needs to be unscrewed. Take off the old nut and replace it with the new one. This flange lock nut is an authentic OEM product that is sourced directly from the manufacturer. It is sold individually. The lock nut is made for use with lawnmowers, wood chippers, and edgers manufactured by MasterCut, Yard-Man, Bolens, Craftsman, Cub Cadet, Murray, Troy-Bilt, Yard Machines, MTD, and Huskee.

Bow tie cotter pin secures components on lawn tractors and riding mowers. Replace if bent, missing, or worn to ensure proper fastening of parts.

Lost or broken push cap preventing setting adjustments? This small but essential control cap restores proper function on mowers and tractors. Quick fix.

Extension spring manages component placement through tension on lawn tractors. Replace if stretched, broken, or losing tension. Verify fit with your model number.

This torsion spring is an authentic OEM replacement part sourced directly from the manufacturer. It is used to hold the idler pulley securely against the belt so that the belt can turn. Over time, the torsion spring may become worn and not function properly. If this happens, the belt will not turn, and the tractor will not run. The torsion spring should be replaced and the belt inspected for damage. Before replacing the torsion spring, make sure the tractor engine is cool. Remove the keys from the tractor and disconnect the battery terminals to prevent the engine from being started. Locate the idler pulley and loosen the screws holding it in place. This will loosen the belt so that it can be removed to access the torsion spring. Once the spring is located, remove it and install the new one. Reinstall the belt and tighten the idler pulley. Reassemble the tractor and reconnect the battery. Test the tractor to make sure the torsion spring is installed correctly. This torsion spring is a gold-colored metal part that is sold individually. This spring is designed to be tractors manufactured by MTD and Craftsman.

Replace your lawn mower's deck bearing shield if cracked, broken, or missing. This protective cover installs on the mower deck to shield bearings from debris.

Shoulder spacer for lawn tractors and riding mowers. Installs between moving parts to reduce friction. Replace if worn, cracked, or missing.

This is a two in one blade that can be used as a lift blade to bag clippings, as well as a side discharge for clippings. It is time to consider replacing this blade when there are uneven or even missed areas of cutting or bagging when using the mower. It may be that the blade has been dulled by prolonged use or bent or damaged by striking rocks and dense roots. Either way, replacing the blade is a relatively easy repair to make and should be considered a part of routine maintenance. The repair requires the use of the proper tools, including wrenches and sockets. An appropriate flange bolt may need to be purchased as well if the original has been damaged or worn. "This OEM replacement cutting blade works with more than 150 types of tractors and mowers made by Craftsman, Yard Machines, Yard-Man, MTD, and Troy Bilt. This ships singly and is a high-quality blade made of durable materials.

This replacement part is a pulley spacer intended for use in different lawn mowers. This is a genuine replacement part made by MTD. Pulley spacers allow the pulley to rotate while providing a gap so that friction does not build up inside the machine and create extra heat.A new pulley spacer might be needed if the current one is damaged or broken in any way. It is common for this part to be replaced after years of normal wear and tear. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. For more detailed instructions on how to replace this specific part, please reference the user guide.This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn mowers made by MTD.

This genuine replacement part is a V-belt for use with lawn tractors and riding mowers. It is also known as a lawn tractor blade drive belt. This V-belt is required for safe and reliable operation of the lawn mower or lawn tractor. This drive belt turns the pulley responsible for spinning the blades on the mower deck. If the V-belt is broken, the mower blades will not be able to turn. The V-belt can become worn or damaged through regular use, requiring replacement. It is recommended to check the V-belt once a year as part of a preventative maintenance plan. Prior to replacing this part, please refer to the original product manual for installation instructions. No tools are required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. This V-belt is compatible with Craftsman, MTD, Troy-Bilt, and more lawn tractors. Please note: original part number 754-05021 is now obsolete, and manufacturer has replaced the original part number with this part.

This part is a replacement idler pulley. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a defective or broken idler pulley in a variety of lawn tractor models. Idler pulleys help to guide the engine's drive belt. This part is subject to significant wear and tear over time and may require replacement. Signs that the idler pulley might need replacing include a squealing sound coming from the belt or the pulley being visibly worn. Proper tools are required to install this part. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this idler pulley, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this idler pulley is suitable for use on several different models of lawn tractors manufactured by MTD, Troy-Bilt, Yard Machines, Cub Cadet, Husky, and Yard Man. This is a genuine part made of high-quality, durable materials and is sold individually.

Idler bracket pivot for lawn tractors. Fixes belt slipping, unusual noises, or blade engagement issues. Common wear part for deck drive systems.

Secures and protects the idler pulley on lawn tractors and riding mowers. Replace if cracked, loose, or missing to maintain proper belt tension.

Replace a worn engage cable bracket if your lawn tractor blade won't engage or disengages during use. Mounts to deck, simple bolt-on installation.

Deck belt cover for 42-inch lawn tractors. Shields the deck belt from debris and damage. Replace if cracked, broken, or missing. Verify fit with model.

Nozzle adapter for lawn tractors and riding mowers. Connects hoses or tubes in the fuel or deck wash system. Replace if cracked, stripped, or missing.

Fastening screw for lawn mowers and tractors. Secures components throughout the equipment. Replace if stripped, broken, or missing during repairs.

5-inch diameter deck roller wheel for lawn tractors and riding mowers. Replaces cracked, worn, or missing deck wheels that support smooth cutting deck operation.

Here is a replacement shoulder screw that is commonly used for various types of outdoor power equipment. Another name for the shoulder screw is a shoulder pin. The screw is often used to help secure the plastic wheels to the deck of a machine. However, different machines may have different uses for shoulder screws and other types of hardware. The shoulder screw is made from metal and is durable. However, the pin may still need to be replaced at some point. Whether it is because of corrosion or being bent, it is important to replace a failed screw with a new one. When performing maintenance on the machine, it is also possible that the screw could become lost, which would require a replacement. This is a genuine OEM replacement shoulder screw. It is sold individually and works with many types of makes and models. The screw is often used for edgers, snowblowers, lawn mowers, and chainsaws. Brands that have models that will be compatible with the shoulder screw include Craftsman, Toro, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Huskee, Yard-Man, and MasterCut.

Shoulder bolt for riding mowers and lawn tractors. Used as an axle for wheels and deck components. Replace if bent, worn, or stripped from regular use.

Replacement grass chute assembly for lawn tractors and riding mowers. Directs clippings to the side or bag. Replace if cracked, broken, or detached.

Torsion spring for lawn tractors and riding mowers. Replaces broken, worn, or missing springs in deck lift or blade engagement systems.

Hinge pin that secures the discharge chute to your mower deck. Replace if pin is lost, broken, or bent. Essential hardware for proper chute operation.

Deflector chute mounting bracket for lawn tractors and riding mowers. Replace this bracket if cracked, bent, or broken to properly secure the discharge chute.

Hex cap screw fastener for outdoor power equipment. Secures components with hexagon-shaped head. Replace if stripped, broken, or missing threads.

A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.

Stabilizes your mower deck belt and prevents slipping or excessive friction. Replace if damaged, bent, or missing to keep your belt aligned and running.

Blades won't engage or spin unevenly? This blade spindle shaft connects your mower deck to the cutting blades. Moderate DIY repair in 1-2 hours.

A ball bearing is a common type of rolling-element bearing. It will use balls to keep space between the bearing races and eliminate friction and contact between moving parts. Ball bearings used in lawn and garden equipment ensure that axial loads and radial loads are evenly supported and that there is only a limited amount of rotational friction on the component. It distributes weight evenly, but will undergo constant wear and tear from vibration, heat, and friction and will need replacement regularly. This ball bearing is a genuine OEM part suited to use in Craftsman, Cub Cadet, Ryobi, Troy-Bilt, MTD, Huskee, Yard Machines, Bolens, Mastercut, and Yard-Man equipment. It may be needed for repair work done on a lawnmower, snowblower, tiller, edger, or a log splitter.

This replacement part is a bagger and is intended for use with lawn mowers. This part is compatible with various kinds of lawn mowers. The bagger is responsible for collecting the leaves and other debris during use so that the user can clean up more easily. A new bagger might be needed if the current part is no longer working properly or is damage. If the part cannot stay attached to the lawn mower, it might be best to replace it altogether. If the bag has visible tears or rips, consider replacing this part as well. This should be a fairly simple repair. This is a genuine replacement part made by MTD, sold individually.

Replacement mulch kit for lawn tractors and riding mowers. Converts mower deck to mulching mode. Replaces broken, damaged, or missing mulch kit components.