Parts for Ge CFE28TP4MCW2: Dispenser Door Parts

Replacement fastener for refrigerator door handles. Secures handle to door with durable metal construction. Needed when original is cracked or broken.

The mullion hinge spring is a small coil spring that provides tension to the hinged mullion flap or divider between two refrigerator doors or compartments, keeping it pressed firmly closed when not in use. It ensures a proper seal and prevents cold air from escaping between the doors. Replace this part if the mullion flap hangs loosely, does not spring back into position, or you notice warm spots or frost buildup near the center divider of your refrigerator.

Guides the center door mullion spring pivot for smooth flap operation. Replace if worn or damaged to maintain proper door seal. Verify fit with model.

Trim cap that covers the refrigerator door hinge hardware. Replace if cracked, broken, or missing to protect the hinge and restore a finished look.

Fix leaks or no water flow to your dispenser and ice maker. This flexible inlet line restores reliable water supply. Moderately easy DIY repair.

Plastic clip for bottom-mount refrigerators. Secures shelves, bins, or interior components. Replace if broken, cracked, or missing to restore stability.

Fix a dark refrigerator interior with this LED light and cover assembly. Restores bright, energy-efficient lighting to clearly see stored food items.

This is a replacement Café hot water display assembly that restores the dispenser/control panel display for hot water settings, keeping the dispenser readable and functional. Fits white slate trim and matches original appearance. What it does:

• Shows hot water settings and status on the dispenser/control panel
• Restores display clarity when numbers or icons are dim, missing, or unresponsive
• Replaces cracked, faded, or cosmetically damaged display lens
• Helps the dispenser communicate ready/temperature indications used during dispensing

• 1 hot water display assembly (white slate)

• High-level replacement only; verify power is disconnected before starting
• Handle the display carefully to avoid scratching the lens or damaging connectors
• May require removing the dispenser/control housing; keep track of screws and fasteners

This small return spring provides the tension needed for a lever, latch, or flap mechanism in select refrigerators, helping the component move smoothly and snap back to its correct resting position after use.

• Restores proper tension so the linked mechanism operates smoothly and returns to neutral
• Helps doors, latches, or levers close or engage consistently
• Typical failure signs: weak or missing spring force, parts that don't spring back, poor closure, or rattling
• Replacing a fatigued spring can improve feel and reliability of the mechanism

• Disconnect power; turn off the water supply if working near dispenser or ice components
• Note spring orientation and take reference photos before removal
• Use needle-nose pliers and control stored tension to avoid injury
• Inspect related clips, pins, or brackets and replace if worn

Fix a non-working water or ice dispenser with this paddle and switch assembly. Direct replacement for common dispensing issues. Easy 15-minute repair.

Replacement screw secures panels, trim, brackets, and internal components in your refrigerator. Needed when original is missing, stripped, or corroded.

Size: 8 - 18 ab.

If your refrigerator has warm spots or uneven cooling, this air damper door assembly regulates airflow between freezer and fresh-food sections. DIY repair.

Fix ice clumping or frost buildup in your dispenser. This spring returns the ice chute door to closed position, maintaining a tight seal. Easy repair.

The Motor Duct Door is an OEM part for GE refrigerators. It is the cover that houses the evaporator fan motor and ductwork in the refrigerator. The motor and ductwork circulate cold air throughout the unit to maintain even temperatures for food storage.

Causes of a bad motor duct door can include failed seals that compromise cooling performance or damage to the door and hinges that prevent proper opening and closing. 

Symptoms of a bad motor duct door include: 

• Warm or lukewarm air inside the refrigerator sections  
• Improper airflow causes warmer or colder spots
• Difficulty opening or closing the duct door

Replacing with this genuine GE OEM part allows for optimal air circulation throughout the refrigerator. This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This set screw secures refrigerator components—most commonly door handles—to their mounting studs. Replacing a missing or stripped screw restores a solid, secure feel and helps prevent loose or wobbly handles.

• Locks the handle to its mounting stud to keep it tight and secure
• Helps resolve a loose, wobbly, sliding, or rattling handle
• Replaces a missing, rounded, or damaged set screw
• Helps maintain proper handle alignment and consistent door operation

• Unplug the appliance or switch off power before servicing
• Ensure the handle is fully seated on the studs before tightening
• Start the screw by hand to avoid cross-threading; then tighten until snug
• Do not overtighten to prevent stripping the screw or handle threads

Replacement bottom ice bin for refrigerator door storage. Installs in lower door ice section. Replace cracked, warped, or missing bins to restore secure storage.

Top-left refrigerator door bin for models with in-door ice. Replaces cracked, broken, or missing bins to restore secure storage and organization.

Detachable ice storage bin with hinged door for refrigerator ice dispensers. Replace if cracked, broken, or missing to restore ice containment and access.

Set screw for refrigerators. Secures components in place throughout your appliance. Replace if stripped, missing, or damaged during repair work.

Trim piece that reinforces the port opening on refrigerators. Secures tubing connections for proper alignment and a finished look. Replace if cracked or missing.

Fix water leaking from your refrigerator dispenser with a new port gasket. This seal prevents drips and moisture around the dispenser opening.

Seals the refrigerator fresh food compartment door to maintain temperature and prevent warm air entry. Replace if torn, cracked, or loose. Verify fit.

A left-hand closure door assembly that replaces a worn or broken door closure to restore proper sealing and smooth drawer/door operation. Helps stop drafts and keeps compartments closing correctly for reliable performance. What it does

• Guides and supports the left-side door/drawer as it closes to ensure proper alignment.
• Helps form a tight seal to reduce air leakage and maintain interior temperature.
• Prevents rattling or catching that can occur when the closure is damaged or worn.
• Commonly replaced when the door doesn't stay closed, binds, or leaves a visible gap.

• Disconnect power to the appliance before starting any repair.
• Basic hand tools are typically required; access may involve removing a drawer or trim panel.
• Handle parts carefully to avoid damaging surrounding panels or gaskets.

Secures the ice and water tray in your refrigerator to prevent shifting and rattling. Replace this guard assembly if yours is cracked, broken, or missing.

Water pooling under your refrigerator dispenser? This drip tray catches spills and keeps the hot water dispenser area clean. Simple snap-in install.

This is a plastic tray that sits in the recessed area below the front grille of a refrigerator, directly beneath the water and ice dispenser. It catches drips and spills from the dispenser to prevent water from pooling on the floor. Replace this tray if it is cracked, warped, discolored, or no longer fits securely in the grille recess.

Ice maker not releasing cubes properly? This tray lock lever secures the ice tray during the harvest cycle. Common fix for ice jams and incomplete ejection.

Fixes dim or uneven refrigerator lighting. This LED light shield replaces cracked or yellowed covers to restore proper light distribution. Simple DIY fix.

8-18 hi/lo 5/8

This is a replacement 8-18 x 1/2" flat-head slotted screw commonly used to secure appliance panels and components. It restores proper fastening and helps eliminate rattles, loose trim, or misaligned parts. What it does:

• Secures panels, brackets, and trim to restore proper fit
• Stops vibration-related noise caused by loose fasteners
• Replaces missing or stripped screws to prevent parts from shifting
• Works where a flat-head, slotted-drive #8 screw with 1/2" length is required

• One 8-18 x 1/2" flat-head slotted screw

• Use the correct size slotted screwdriver to avoid cam-out or head damage
• Tighten until snug; avoid over-torquing which can strip threads or deform panels
• Replace any stripped mating hardware for secure fastening
• Disconnect power before doing repairs on appliances where required for safety

This USB port cover replaces a broken or missing cover on the appliance control panel to protect the USB connector from dirt and moisture. It restores a finished appearance and helps keep the port functional. What it does:

• Covers and protects the appliance USB port from dust, moisture, and accidental contact
• Prevents debris from entering the connector, reducing risk of connectivity issues
• Restores the control-panel appearance when the original cover is cracked or lost

• Disconnect power to the appliance before servicing to avoid shock or damage
• Accessible from the control panel; typically snaps into place or secures with small fasteners
• Inspect surrounding trim for damage and replace any broken clips to ensure a secure fit

Ice dispenser not working or jamming? This ice bucket and auger motor assembly restores proper ice storage and dispensing. Moderate DIY repair.

Ice dispenser not working or jamming? This clutch spring restores proper tension so the auger engages smoothly. Simple DIY fix for reliable dispensing.

This clutch coupling connects the washer motor/clutch to the agitator so the tub agitates properly during the wash cycle. Replaces a worn or broken coupling to restore normal agitation and reduce slipping or grinding. What it does:

• Transfers motor/clutch rotation to the agitator so clothes move during wash cycles.
• Commonly used when the washer spins but does not agitate or when agitation is weak.
• Helps eliminate slipping, grinding, or unusual noise from a failing coupling.
• Works as the mechanical link between the drive system and agitator assembly.

• One clutch coupling as pictured and specified by the OEM.

• Disconnect power and water supply before starting any repair.
• Basic mechanical skills and common hand tools required; follow OEM disassembly steps for safe access.
• Inspect related parts (agitator, drive shaft, clutch) for wear and replace as needed.

Loose or rattling parts inside your refrigerator? This e-clip retaining ring secures shafts and pins to prevent unwanted movement and component separation.

Folding center strip that seals the gap between French doors. Replace if worn, damaged, or causing air leaks and condensation. Verify fit by model number.

Center mullion hinge for bottom-mount refrigerators. Mounts between refrigerator and freezer doors to support door alignment and closing. Replace if cracked or broken.

Refrigerator mullion hinge allows the center flipper rail between doors to pivot smoothly. Replace if doors don't seal, mullion is loose, or condensation forms. Confirm fit by model number.

Blank screen or unresponsive controls? This LCD display board restores your refrigerator's touchscreen and settings panel. Moderate DIY repair.

Controls LED lighting and temperature display functions in your refrigerator door. Replace if lights flicker, display malfunctions, or buttons stop responding.

Round-head sheet metal screw (10-24 x 5/8) secures trim, panels, and internal components in refrigerators. Replace if missing, stripped, or corroded.

Hinge-mounted stop that limits how far your refrigerator door can swing open. Replace if cracked, broken, or missing to prevent door overextension.