Parts for Ge PFE27KSDDSS: Dispenser Door Parts

Removes contaminants from your refrigerator's water and ice. Replace every 6 months or when the filter indicator activates. Confirm fit with your model.

This tube plug seals a small appliance tubing opening to stop leaks and keep water flowing only where it should. It's a simple, serviceable replacement for worn or missing plugs to restore a watertight seal. What it does

• Seals the end or service port of a water or refrigerant tube to prevent drips and leaks
• Helps maintain normal water flow by closing unwanted openings
• Commonly replaced when a plug is cracked, missing, or no longer seals
• Can reduce water damage and nuisance pooling near the appliance

• One tube plug

• Recommended for technicians or confident DIYers familiar with appliance water lines
• Turn off water supply and unplug the appliance before service
• Inspect mating tubing for damage; replace tubing if damaged to ensure a proper seal
• Use appropriate hand tools; avoid excessive force that could damage fittings

Fix ice dispenser not closing properly or warm air entering. This flapper door spring restores proper tension for smooth operation. Easy DIY repair.

Guides the center door mullion spring pivot for smooth flap operation. Replace if worn or damaged to maintain proper door seal. Verify fit with model.

Trim cap that covers the refrigerator door hinge hardware. Replace if cracked, broken, or missing to protect the hinge and restore a finished look.

Replacement round-head screw for refrigerators. Secures interior panels, brackets, and components. Needed when original fasteners are missing or worn.

Plastic clip for bottom-mount refrigerators. Secures shelves, bins, or interior components. Replace if broken, cracked, or missing to restore stability.

Fix a dispenser paddle that won't return after pressing. This small spring restores tension to your refrigerator's lever mechanism. DIY repair in 10 minutes.

Replace the dispenser actuator paddle on your refrigerator when it becomes cracked, broken, stuck, or won't release properly. Installs at the front.

Replacement screw secures panels, trim, brackets, and internal components in your refrigerator. Needed when original is missing, stripped, or corroded.

This genuine replacement screw secures appliance panels and components where a short 8-18 x 1/2 in fastener is required, restoring proper fit and preventing rattles or loose parts. What it does:

• Secures panels, brackets, trim, and small components
• Restores tight fit where stripped or missing screws cause vibration or rattling
• Matches OEM thread and length for reliable fastening
• Prevents gaps that can trap dirt or interfere with operation

• One screw

• Use the correct Phillips screwdriver to avoid stripping the head
• Tighten until snug; avoid over-tightening which can strip threads or crack plastic
• Disconnect power and remove any panels as required before working near electrical components
• Replace only with the exact OEM screw to maintain proper fit

This cover funnel is a molded replacement piece that helps guide liquids where they belong and keeps the surrounding area cleaner. It restores proper flow direction and reduces spills or pooling in the appliance. What it does:

• Directs liquid flow to the intended channel or receptacle to prevent splashing and overflow
• Helps keep nearby components and cabinet area cleaner by containing drips
• Can resolve symptoms like pooling, dripping, or liquid misdirection near the dispenser or internal funnel area
• Fits into the existing funnel housing to restore original flow path

• Disconnect power to the appliance before starting any work; also shut off the water supply
• Remove any obstructing panels or components to access the funnel area, noting orientation for reassembly
• Snap or slide the cover funnel into place until it seats securely; avoid forcing plastic parts to prevent breakage
• Test operation and check for proper flow and leaks before finishing reassembly

If your refrigerator has warm spots or uneven cooling, this air damper door assembly regulates airflow between freezer and fresh-food sections. DIY repair.

Fix ice clumping or frost buildup in your dispenser. This spring returns the ice chute door to closed position, maintaining a tight seal. Easy repair.

Fixes uneven cooling or warm spots in refrigerator compartment. This motor duct door cover houses the evaporator fan and ductwork for proper airflow.

Ice dispenser jammed or spilling cubes? This ice funnel guides ice from maker to bin. Moderate DIY repair; requires dispenser panel removal.

Replacement fastener for refrigerator door handles. Secures handle to door with durable metal construction. Needed when original is cracked or broken.

Replacement set screw for refrigerator door handles. Secures handle assembly to door. Needed when original screw is lost, stripped, or damaged.

Top-left refrigerator door bin for models with in-door ice. Replaces cracked, broken, or missing bins to restore secure storage and organization.

Detachable ice storage bin with hinged door for refrigerator ice dispensers. Replace if cracked, broken, or missing to restore ice containment and access.

Covers the water filter compartment and pivots open for filter changes. Replace this dark gray door if cracked, broken, or missing to restore a clean look.

Removes contaminants from your refrigerator's water and ice. Replace every 6 months or when the filter indicator activates. Confirm fit with your model.

Water filter bypass plug allows your refrigerator to operate without a filter by creating direct water flow. Replace if damaged or worn. Confirm fit with your model.

Secures the water filter manifold to the cabinet, ensuring proper alignment and a leak-free seal. Replace if damaged or filter won't seat correctly.

Fix a water filter that won't install or seat properly. This manifold and plug assembly restores the filter housing connection in 15-30 minutes.

Control board exposed or damaged? This PCB cover assembly shields electronics from dust and moisture, restoring protection for reliable operation.

Refrigerator collar gasket seals connections to prevent air leaks and maintain temperature. Replace if worn, cracked, or causing cooling issues.

Fix water leaking from your refrigerator dispenser with a new port gasket. This seal prevents drips and moisture around the dispenser opening.

Seals the refrigerator fresh food compartment door to maintain temperature and prevent warm air entry. Replace if torn, cracked, or loose. Verify fit.

Curved door handle assembly for your refrigerator's fresh food compartment. Replace a cracked, broken, or missing handle to restore a secure grip and clean finish.

Replace a worn left-hand closure door assembly to restore proper sealing and smooth drawer operation. Stops drafts and keeps compartments closing correctly.

Door bin guard tray assembly for your refrigerator. Installs on door shelf to prevent items from falling. Replace if cracked, broken, or missing.

Replaces the recessed trim panel behind the toe kick or under the appliance grill. Covers the cavity, protects components from debris, and restores appearance.

This lever tray lock secures a refrigerator drawer/tray so it opens and closes smoothly and stays in place. Replace a worn or broken latch to restore proper drawer retention and prevent the tray from slipping or falling. What it does:

• Acts as the latch mechanism that holds a refrigerator tray or deli drawer closed
• Guides and locks the tray in the proper position during use and movement
• Commonly replaced when the tray won't stay closed, catches or jams, or the lever is cracked
• Durable plastic construction matched to factory fit for reliable operation

• One lever tray lock

• Disconnect power to the appliance before starting any repair
• Access may require removing the drawer or inner liner—keep track of screws and clips
• Install with common hand tools; avoid forcing parts to prevent breakage

Fixes dim or uneven refrigerator lighting. This LED light shield replaces cracked or yellowed covers to restore proper light distribution. Simple DIY fix.

Mounting screw for washers and appliances. Replace if screw is stripped, missing, or corroded. Secures panels and components during installation.

This is a replacement 8-18 x 1/2" flat-head slotted screw commonly used to secure appliance panels and components. It restores proper fastening and helps eliminate rattles, loose trim, or misaligned parts. What it does:

• Secures panels, brackets, and trim to restore proper fit
• Stops vibration-related noise caused by loose fasteners
• Replaces missing or stripped screws to prevent parts from shifting
• Works where a flat-head, slotted-drive #8 screw with 1/2" length is required

• One 8-18 x 1/2" flat-head slotted screw

• Use the correct size slotted screwdriver to avoid cam-out or head damage
• Tighten until snug; avoid over-torquing which can strip threads or deform panels
• Replace any stripped mating hardware for secure fastening
• Disconnect power before doing repairs on appliances where required for safety

Ice dispenser not working or jamming? This ice bucket and auger motor assembly restores proper ice storage and dispensing. Moderate DIY repair.

Ice dispenser not working or jamming? This clutch spring restores proper tension so the auger engages smoothly. Simple DIY fix for reliable dispensing.

If your refrigerator agitator isn't working properly or makes grinding noises, this clutch coupling connects the motor to restore normal agitation.

Loose or rattling parts inside your refrigerator? This e-clip retaining ring secures shafts and pins to prevent unwanted movement and component separation.

Folding center strip that seals the gap between French doors. Replace if worn, damaged, or causing air leaks and condensation. Verify fit by model number.

Center mullion hinge for bottom-mount refrigerators. Mounts between refrigerator and freezer doors to support door alignment and closing. Replace if cracked or broken.

Refrigerator mullion hinge allows the center flipper rail between doors to pivot smoothly. Replace if doors don't seal, mullion is loose, or condensation forms. Confirm fit by model number.

Redirects refrigerator tubing at a right angle for neater routing in tight spaces. Replace this 5/16 in. connector if cracked, leaking, or broken.

Fix a dead display, no lights, or non-working water/ice dispenser. This door control board restores door functions. Moderate DIY repair, 30-45 minutes.

Round-head sheet metal screw (10-24 x 5/8) secures trim, panels, and internal components in refrigerators. Replace if missing, stripped, or corroded.

Silicon controlled rectifier for appliances. Switches and regulates power to heating or motor circuits. Replace if cracked, damaged, or failing to control.

A replacement 8-18 x 3/4 flanged pan-head screw used to secure panels, trim, and components. Restores proper fit and stops loose parts from rattling or shifting, helping appliances operate quietly and safely. What it does

• Fastens panels, brackets, trim pieces or assemblies that use an 8-18 thread screw
• Replaces missing or stripped screws that cause loose or vibrating parts
• Helps maintain proper alignment of panels and covers
• Prevents gaps that can allow movement or noise during operation

• One 8-18 x 3/4 flanged pan-head screw

• Disconnect power to the appliance before starting any repair
• Use the correct screwdriver or nut driver to avoid stripping the head
• Thread the screw in by hand first, then snug; avoid over-tightening
• If underlying threads are damaged, replace the mating fastener or insert as needed