Parts for Bosch WAT28402UC/06: Dispenser / Pump Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This dispenser tray is the dishwasher detergent cup assembly that holds and releases detergent during wash cycles, helping ensure detergent is delivered when the machine rinses and cleans dishes. What it does

• Holds detergent/soap and releases it at the correct point in the wash cycle
• Ensures proper detergent flow to improve cleaning performance
• Prevents loose detergent from scattering inside the tub
• Visible replacement sign: cracked, warped, or detergent residue that won't clear

• One dispenser tray (detergent cup) as shown

• Disconnect power and water supply before removing or installing the dispenser
• Remove the inner door panel per manufacturer instructions to access the tray
• Handle carefully to avoid damaging the door latch and wiring harness
• Run a short test cycle after install to confirm proper operation and detergent release

Siphon device for washer dispenser systems. Replaces cracked, broken, or missing siphon components that affect detergent flow and dispensing.

Detergent dispenser insert for washers. Replaces cracked, broken, or missing inserts in the dispenser drawer. Direct fit replacement part.

Fix detergent leaks or residue buildup with this lower dispenser tray. Replaces cracked or warped trays for clean, reliable dispenser operation.

If detergent isn't dispensing properly or cups fall out during wash cycles, this upper dispenser tray restores correct positioning and function.

Routes water between internal washer components. Replace if cracked, brittle, or leaking to restore watertight connections. Verify fit with your model.

Secures washer hoses to direct water flow properly. Replace if leaking, loose, or showing wear from age or chemical exposure. Confirm fit with model.

Fix washer overfilling or not filling properly. This pressure sensor monitors water levels during wash cycles. Common repair for fill issues.

Fix washer water level issues or incorrect fill cycles with this pressure chamber hose. Connects water-level sensor to control for accurate sensing.

Flexible drain hose that routes water out of your washer during drain cycles. Replace if cracked, leaking, kinked, or disconnected from the pump.

Routes water between washer components. Replace if cracked, worn, or leaking to restore proper water flow and prevent leaks. Confirm fit with your model.

Replacement mounting bracket holder that secures internal components in place. Install when original is cracked, broken, or missing to restore proper alignment.

Secures rotating components in your washer to prevent movement and vibration. Replace if parts feel loose or noisy. Confirm fit with your model number.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This is a drain hose that connects the washer's sump to the drain pump or external drain line, allowing used wash water to exit the machine. It is a flexible hose designed to handle the flow of water during the drain cycle. Replace this hose if you notice water leaking beneath the washer, slow draining, or visible cracks and deterioration in the hose material.

Washer won't start or stops mid-cycle? This door lock assembly secures the door during operation, restoring proper locking and cycle completion.

The Washer Filter-Fluff is an OEM replacement part for Bosch washing machines. It is a critical component responsible for capturing lint, debris, and other particles that may accumulate during the wash cycle, preventing them from clogging the drainage system or causing damage to the machine.

Over time, the accumulation of lint and debris can impede the filter's effectiveness, leading to drainage issues and reduced washing performance. Physical damage to the filter can also compromise its ability to capture lint properly.

Symptoms of a bad washer filter-fluff include:

• Slow or incomplete draining of the washing machine
• Excessive lint on clothes after washing
• Unusual noises during the drain cycle
• Error codes related to drainage issues

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore washing machine models. 

If your washer won't drain or water pools in the drum, this drain pump forces water out through the hose. Moderate DIY repair, about 1 hour to replace.

This is a factory replacement set packaged under this part number. It provides matched components specified by the manufacturer to restore proper fit and function when the original set pieces are worn, missing, or damaged.

• Supplies the exact grouped parts designated for this repair
• Helps resolve issues caused by missing, loose, or broken components
• Supports correct assembly, alignment, or sealing as designed
• Common signs include rattling, misalignment, or parts that won't stay secured

• Disconnect power and shut off water or gas before servicing
• Refer to your model's parts diagram for placement and orientation
• Handle sharp edges/components carefully; wear cut-resistant gloves
• Verify operation before final reassembly

Replaces cracked, broken, or missing washer outer housing cover panel. Protects internal components from dirt and moisture while finishing exterior.

Replace your washer's access panel cover to restore proper enclosure protection. Shields internal components from debris and moisture. Confirm fit with your model number before ordering.

The washer water inlet filter is a small mesh screen that sits at the water inlet valve connection point and catches sediment, debris, and mineral particles from your home's water supply before they enter the machine. Keeping this filter clear ensures proper water flow into the washer. Replace this part if your washer is filling slowly, not filling at all, or if the existing filter is torn, corroded, or too clogged to be cleaned effectively.

Fix a washer that won't fill with water or fills slowly. This inlet valve magnet coil controls water flow into your machine. Simple 30-minute repair.

This is an electromagnetic water inlet valve that controls the flow of water into your washing machine, typically directing it to the detergent dispenser. It opens and closes electronically based on signals from the control board during the wash cycle. Replace this valve if the washer is not filling with water, fills slowly, leaks from the valve area, or if the dispenser is not receiving water properly.

This is a water inlet hose for a dryer, used to supply water to the steam function or condensation system. It connects the household water supply to the dryer's internal water valve. Replace this hose if it is cracked, leaking, kinked, or if the dryer's steam feature is not receiving adequate water flow.

If your washer isn't filling with water or you see leaks at the connection point, the water inlet hose may need replacement. Direct fit for select models.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.