Dixon Lawn Mower Parts

This is a bellcrank ground drive intended for use with riding mowers, tractors, and trimmers. The bellcrank ground drive employs the idler pulleys when the pedal brake control shaft assembly is pressed. A new bellcrank may be needed if the original was faulty, or if it becomes significantly worn through general operation of the machinery. However, installation of a new bellcrank is relatively simple. Only a few tools will be required when replacing this item, including: a socket set, a set of pliers and a hex wrench. The removal of the mower deck will also be required. The user should refer to their owner's manual for guidance regarding their specific model.This is an OEM part sourced directly from the manufacturer. It is sold individually. The bellcrank ground drive is designed for use in Husqvarna, Poulan, Weed Eater, and Jonsered models.

This shoulder bolt is an authentic OEM replacement part sourced directly from the manufacturer. It is used on many lawn and garden machines to connect parts that rotate or move. The bolt is threaded partway up the shaft, and then the shoulder is smooth. This smooth area allows for rotation. Shoulder bolts can be found on pulleys, gears, rolling wheels, and moving parts of the engine. The bolt's size indicates the shoulder's length, measured from the end of the shoulder to underneath the head. This shoulder bolt has a hexagonal head that requires a hex wrench to remove and replace. The bolt may rust or corrode due to normal wear and tear and exposure to the weather. Constant pressure due to moving parts may also cause the bolt to be worn down. During routine inspections, if the bolt is found to be worn, it should be removed and a new one installed. This shoulder bolt is a heavy-duty gold-colored part that is sold individually. This shoulder bolt is designed for use on all outdoor lawn and garden machines that require a 1/2C x 2/ ¾ inch shoulder bolt.

This bolt is a genuine Husqvarna part, sold individually. This bolt can be used as a replacement part in a lawnmower. The purpose of the bolt in a lawnmower is to serve as a fastening component, in conjunction with a nut, so that the placement of one or more components can be ensured while the appliance is in operation.The bolt in a lawnmower might have to be replaced if the bolt is subject to stripping or wearing away over time as a result of general wear and tear from long-term use. The bolt can also be lost or misplaced while the appliance is in operation, in which case the bolt should be replaced by this genuine OEM replacement part. It is a simple replacement that will require only basic tools to properly execute. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This bolt is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This part is a replacement bolt. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, stripped, or lost bolt in outdoor power equipment. Bolts are a standard piece of hardware that can be used to securely fix together different equipment components. They should be replaced if corroded, lost, stripped, or otherwise ineffective. When working on or near an engine, it is important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this bolt, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this bolt is suitable for use on several different models of outdoor power equipment manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This part is a replacement bolt. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or lost bolt in outdoor power equipment.Bolts are a standard piece of hardware that ensure equipment components are properly and securely fastened together. Bolts can easily become stripped, corroded, broken, or lost over time and will thus require replacement. When working on or near an engine, it's important to make sure the equipment is powered off and completely cool before starting any repairs. For more accurate information on how and where to install this bolt, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this bolt is suitable for use on outdoor power equipment manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This replacement part is a choke cable. It restricts the flow of air in a carburetor, which helps the engine start and run smoothly. If the engine is not starting smoothly, the choke cable may have been damaged or worn and should be replaced. When working on or near an engine, gloves should be worn for safety.This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This replacement part is an eye bolt, or sometimes called a lawn mower bolt, intended for use in lawn mowers. This is a genuine replacement part made by Husqvarna. Eye bolts are an important part in many lawn mowers as they are responsible for keeping different parts in place and secure so that the user is safe while operating the appliance.A new eye bolt might be needed if the current one is damaged or broken in any way. It is also possible for the eye bolt to become loose or stripped overtime and will need replacing. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part.This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn mowers made by Husqvarna.

This part is a replacement disc cog bracket. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can replace a defective or broken disc cog bracket in lawn tractors.The disc cog bracket is essential to the proper and safe use of the lawn tractor. This part is subject to wear and tear over time or with regular equipment usage. Thus, it may require replacement with a genuine OEM replacement part of faulty or rendered ineffective in any way. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular disc cog bracket, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality materials. This disc cog bracket can be used with a variety of lawn tractor models manufactured by Husqvarna, Poulan, Craftsman, and other brands.

This bolt is a genuine Husqvarna part, sold individually. This bolt can be used as a replacement part in a lawn mower. The purpose of the bolt in a lawn mower is to serve as a fastening component, in conjunction with a nut, so that one or more components can be efficiently and effectively locked into place during the standard operation of the appliance.A bolt in a lawn mower might have to be replaced if it is lost or damaged. Since the bolt is a small component, it can gradually loosen from the machinery and fall out during the operation of the appliance without the operator noticing its absence. Additionally, the bolt can suffer from puncturing, denting, cracking, eroding, or other damage that can render the bolt without function. If this occurs, the bolt should be replaced by this genuine OEM replacement part.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This bolt is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This part is a replacement hex bolt. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part will replace a broken or misplaced hex bolt in several types of power equipment.The hex bolt gets its name from its hexagon shape and is a standard piece of hardware with many different uses. Bolts are important for securely holding equipment together but can become stripped, corroded, lost, or otherwise defective over time, necessitating replacement. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this hex bolt, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality metal. This hex bolt can be used with small engine power equipment that has been manufactured by Husqvarna, Poulan, and other brands. Sold individually.

This split lock 3/8 washer can be used in a variety of lawn and garden tools. It functions as a component that prevents nuts and bolts from loosening due to vibration when a tool is in use. It’s a split ring with a helical shape, and when fastened together, it exerts a force on the fastener for resistance to motion and increased friction. Typically, this washer is attached on the nut side of a fastener. Over time, the split lock 3/8 washer can start to wear, degrade, or fall apart. This leads to a need for replacement in order to keep the other tool components in the best shape. A flathead screwdriver can be used to pry the washer loose from the bottom or from the split in the washer. Tools needed might include ratchets, wrenches, and a screwdriver. This is a genuine OEM washer known as a 3/8 lock or 3/8 split lock washer and comes as an individual item. It’s gold in color and made out of metal. It can be used for lawnmowers, snowblowers, string trimmers, tillers, wood chippers, and edgers by Husqvarna, Craftsman, Ryobi, Poulan, Weed Eater, Ariens, Murray, and Dixon.