Dixon Parts

This is a riding mower fan that works as a replacement for damaged fans for many mower and tractor models. This fan connects to the transaxle above the pulley. The purpose of the fan is simple—it helps to move air around the transmission, which will prevent overheating. If the machine's engine is running hot, a problematic fan could be to blame. Check the fan and replace it if needed. If the fan doesn't run, the tractor will overheat and not operate properly. Overheating could cause further damage to the engine.The fan is made from high-quality plastic. It should last a long time without worry, but blades could crack and break off eventually due to wear and tear. The fan could also be damaged because of an accident. Regardless, replace the fan.The riding mower fan serves as a replacement for tractors and riding mowers from Jonsered, Husqvarna, and Craftsman. It is sold individually and is a genuine OEM replacement part.

Snap ring secures the transaxle fan in place on riding mower tractors. Replace if original is broken, deformed, or no longer holding the fan securely.

The v-belt is a replacement part used on mowers and lawn tractors. The v-belt works with the pulley assemblies in the machine to transfer power from the engine to the mower blades so that it can properly cut the grass. The v-belt is made from flexible rubber, and over time, the belt can be prone to wear and tear. Owners should check their belts occasionally to ensure they are not wearing out. This could cause the belt to become cracked and brittle, which would require a replacement. If the belt is not working properly, or if it is broken, it will not be possible to transfer power from the engine to the blades. This is a genuine OEM part that is sold individually. This pulley will work for a range of lawn mowers and lawn tractors. The v-belt is compatible with many brands including Craftsman, Husqvarna, Ariens, Dixon, and Poulan. It is important for buyers to make sure they are getting the proper v-belt, including the size, when they are buying their replacement part.

Replacement nut for riding mowers and tractors. Secures components in place throughout the machine. Replace if missing, stripped, or damaged.

Replacement transaxle mounting bracket for riding mowers. Secures the transaxle assembly to the frame. Order when your original bracket is cracked or broken.

Idler arm holds the pulley that guides your mower's drive belt. Replace if bent, cracked, or causing belt slippage. Confirm fit with your model number.

This front suspension link is a genuine MTD part, sold individually. This front suspension link can be used as a replacement part for a lawn mower or a lawn tractor. The purpose of the front suspension link is to secure the steering shaft of the appliance so its components are maintained and stabilized in their placement.The front suspension link might have to be replaced at some point within the standard lifespan of the appliance in the event that the component suffers damage that renders it incapable of performing its stabilizing function. If the components linked by the front suspension link are no longer held in place by this component or if the front suspension link is damaged in the form of puncturing, scraping, eroding, or any other visible damage, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This front suspension link is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

Mower not responding to drive controls? This pivot bar drive control restores proper speed and direction response. Moderate DIY repair for riding mowers.

Belt keeper stabilizes drive belts with minimal friction on riding mowers and lawn tractors. Replace if worn or damaged to prevent belt slippage. Confirm fit with your model number.

Rear suspension link connects suspension components on riding mowers. Replace if cracked, broken, or worn to restore proper linkage between parts.

Grease fitting for riding mowers and tractors. Allows lubrication of internal components during regular maintenance. Replace if damaged or stripped.

Shoulder bolt for lawn tractor mechanical assemblies. Enables rotation in gears, pulleys, and moving parts. Replace if worn, stripped, or missing.

A small thrust washer designed for use in a riding lawn mower's drivetrain or blade assembly. It sits between rotating components to reduce friction and absorb axial loads. Replace this washer if you notice excessive play in the spindle or drive system, unusual vibrations, or worn-out bearing surfaces.

Inner tube for riding mower and lawn tractor tires sized 16x6.5/7.5-8. Replaces punctured, leaking, or damaged tubes to restore proper tire inflation.

Fix flat tires or slow air leaks in your riding mower with this tire valve stem. Simple DIY repair that prevents air from escaping through the valve.

Front wheel rim assembly for riding mowers and lawn tractors. Replaces damaged, bent, or corroded rims. 6x4.5 inch silver rim mounts to front axle.