How to Troubleshoot & Replace Bosch AP2802354 / 00170664 Dishwasher Mounting Bracket Set

Replace mounting brackets. 

Replaced strap with new ones. 

Changed the parts, reset the machine, parts fit precise, all good 

I ordered a pack of mounting clips. Appliance store had said clips were not available. 10 years this way. I looked up on Internet recently and ordered clips. Couple days they arrived. I installed and wife is happy. 

The part you sent worked perfectly, the shipping was quick, Thanks 

The new brackets arrived and were just as expected. Only problem was that the place where the new brackets attach to the dishwasher frame did not have the proper number of slots to accept both metal tabs on the new brackets. But because the attachment place on the frame was made of plastic, this was not a problem. After carefully marking where the additional tab slot was needed in the plastic mount, I used a small screwdriver, the same width of the metal tab on the new bracket, to make the additional slot. I heated the screwdriver with a torch, and used it to punch a new slot in the plastic. It worked out perfectly and the new bracket could then be properly attached. The dishwasher is now firmly mounted in place and no longer tips forward. 

Checked igniter with an ohmmeter and found it to be functioning. Did the same with the gas valve coils according to the Appliance Pros web site and they too appeared to be functioning. Based upon the repair video, the ohms test could be inconclusive. I tested the remaining parts and they seemed to be functioning. The most likely source of the problem appeared to be the coils. I replaced them and the twenty some year old dryer works fine. 

Installed new brackets and it works great. 

Simple and easy 

I watched the video on how to replace the brackets.