Jason W Lakeville , MA October 05, 2019 Appliance: Model KENMORE 721.66339011 Turntable stopped turning Very easy repair, conveniently there is a hatch on the bottom of my microwave that provides access to the turntable motor. You have to cut this hatch out of the bottom with a pair of wire cutters. Then you just remove the plug on the motor, the two screws and it will come right out. To reinstall the hatch you just rotate it 180 degrees and insert the two tabs into the slots on the bottom cover. You will need one small sheet metal screw to hold it down. It would have been nice if the replacement motor came with a spare screw for this purpose but oh well. Read More... 3 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
James R San Jose , CA April 02, 2019 Appliance: Model KENMORE 721.63259300 Microwave turntable stopped turning. Determined what the issue was. The shaft on the motor that goes into the rotating ring had become fused together and broke. Ordered a new motor and ring assembly. Replaced both and problem solved. Parts were easy to find and order on your website and arrived in a couple of days. Thank you! Read More... 3 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
William M Morganton , NC April 24, 2016 No turning table on lg microwave I ordered a new motor and rotating ring assembly since the originals had "melted", it was an easy remove the motor, and replace... Literally "plug and play" one of the easiest repairs to make..and thanks to Appliance Parts Pros, I got the parts fast and was able to have the microwave back in action in no time. Read More... 3 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Michael S College Park , MD January 23, 2017 Shaft from circulating motor broke inside rotating ring assembly Opened the bottom of the microwave, removed motor and ring assembly, and replaced them. Read More... 2 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Pliers, Screwdrivers
David H Portsmouth , VA October 19, 2015 Appliance: LG Microwave Oven LRM1260SW Broken rotary post for tray in microwave oven Turned unit on side, popped off pre-stamped out door (they must have visioned the motor may be needing a replacement), removed one screw and pulled off connector, installed part, turn door 180 degrees to engage tabs and secure with screw supplied by me. Read More... 2 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Pliers, Screwdrivers
David D San Diego , CA October 11, 2020 Appliance: Model LAT8506AAE - MAYTAG WASHER Washer was leaking water from the tub seal area. Purchased and installed new tub bearing and seals. Decided to replace the tub bolts as well, since I had it apart. Now if I could just find a new outer tub (which the manufacturer has discontinued). Appliance parts pros has a great "how to" video which made it simple! Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Pliers, Screwdrivers, Socket Set, Wrench Set
Chester B Sandy , UT May 26, 2021 The turntable motor had stopped working By purchasing a replacement motor and rotating ring; the latter needed as it had fused to the shaft of the motor. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Pliers, Screwdrivers
Erliss P Laurel , MS April 20, 2020 No movement of table Replaced motor and turn table. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Terry K Brookeville , MD August 14, 2018 The rotating ring assembly had broken and the microwave platform was no longer rotating. The replacement part was exactly what was needed; now, the microwave is back to working perfectly! Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes
Humberto D San Bernardino , CA January 15, 2018 Broken turn table roller assembly. Replaced part and all good now. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes