How to Troubleshoot & Replace Samsung AP4337920 / DA61-00954B Refrigerator Ice Guide Assembly

I looked on the internet for advice on how to remove and found little help. I looked for the part, had a glitch on appliancepartspros.com.'s website, called and got straightened out right away. I paid for "two business day" delivery when I ordered on Friday morning. Got the part the next day, Saturday, in the morning. Total customer satisfaction. Guessed right on the removal technique. Two 1.25" wide (standard) putty knives used in tandem like removing a bicycle tire. One flexible and one stiff works best. Work your way up from the bottom on the vertical edge face facing you. I have fully photo documented the removal and replacement procedure. Anyone interested in me posting it? Got an Ice Guide as back up since I was paying for shipping anyways. I fixed the last one with epoxy and steel washer "splints". Happy repairs! Thanks APP.com 

Replace all parts with no issues. Working just fine! 

Replaced arm. 

Refrigerator: Samsung RF266AASH, bottom freezer. I went to more trouble than was necessary by removing the bottom freezer door panel, upper and lower drawers. Go to YouTube for videos on the ice maker, freezer door removal and such. In retrospect, I should have only removed the ice tray using a stubby Phillips screwdriver and replaced the part with mild contortionist moves. Look to the front left bottom of the ice maker for the screw placement. I have a picture, but there's no way to load it. 

The video was very helpful. We removed the ice maker from the freezer. Once the unit was out we replaced the ice tray and overfill lever as these broke when the large ice mass was in the path, and was forced back in by my child. We then replaced the sensor bracket and secured with the bracket. We then reinstalled the ice maker into the freezer. It's great to have individual ice cubes. Very simple. Great products. 

Replaced after watching online video 

Order the part. Received the part. Installed the part. 

This was a very simple fix in replacing the ice cube tray and dispenser dip tray arm with just a screwdriver. The new ice bucket tray assembly just slid into place. Overall the entire replacement process took me less than 15 minutes. 

Parts arrived in 3 days. After viewing youtube video, it took about 5 minutes to do the repair. 

Once I had the replacement parts, the fix was easy. No need to purchase an entirely new ice-maker module. The existing one is held in place with two screws. Once those are out, slide it back and disconnect the power connection. I had to replace both my ice-tray and the ice-full guide since these had been snapped off by a careless baby sitter when she forced the freezer open. The ice sensor was also hanging down because the same sitter didn't know what the foam cover was for and threw it away. :( Once everything was back in place, I re-connected the power and screwed it back in. Then tested it using the reset switch to verify the fix. Walla! We now have a functioning ice-maker again. Very easy fix, really.