How to Troubleshoot & Replace Whirlpool AP6009693 / WP5700M600-60 Window-Pac

Took the door apart and put in new glass part. 

There are 4 levels that need to be removed. The first is the hardest of getting the outer shell off that has 20 years of cooking residue on it. Each layer has obvious screws or nuts that need to come off. A phillips, torx, and nut driver are needed. This was a good time to clean the inside of the outer glass pane and the inside of the door. Make sure that all the broken glass is removed. The panels only go in one way so need to fret out that. The hardest part overall is getting the door off and on. The torx screws come out easily but you have to pull straight out very hard and then the hinges snap back (loudly). To put the door back on, I used small wooden blocks to hold the hinges out about 25 degrees. It took 2 tries the first time I put it back on (I needed to pull the glass to make sure I ordered the correct part) and 3 tries the second time. Watch your fingers! 

My husband replaced the broken glass by removing the oven door, dismantling it and inserting the glass cartridge in place. He said it went well. The only problem was removing one rusted screw. Replacing the oven door seal seemed to be an easy job. 

My husband watched the tutorial on how to fix it . Im glad he did because we would have ordered the wrong part. it was done very quickly! Looks beautiful. The deliverey was so quick too! Extremely happy with the results. 

New parts, lengthily but easy??