Robert M Richmond , VA November 01, 2016 Appliance: Model ON INSIDE OF DISHWASHER Kitchen aid dishwasher only 6 years old and all the control panels flashed and dishwasher would not work Talked to a coworker who has used your service and he convinced us to try and fix this instead of buying a new one. Reading through your website, we saw similar people writing in with same problem so isolated the problem to two parts-Electronic Control board or Control panel. Replaced the Control panel and it immediately was fixed! Knew we could return the other part for a refund too. Saved us at least $800! Read More... 9 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Gary B Hopkinsville , KY February 16, 2016 Appliance: KitchenAid Undercounter Dishwasher KUDS30IVWH4 Push buttons blinked and would not run Watched a YouTube video to help me install the control panel on the dishwasher. Read More... 2 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Scott B Niskayuna , NY September 23, 2016 Kitchen aid dishwasher stopped working and had blinking lights With help from AppliancePartsPros.com online chat, we were able to confirm the correct touch-control panel to replace our broken one. We received the panel in two days despite using the cheapest "ground" shipping! Installation was easy with the help of some YouTube online tutorials. Took about 30 minutes. Now we are free of dirty dishes stacked in the sink! Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Screwdrivers
Elliott B Murrayville , GA July 04, 2015 Lights flashing on kitchenaid dishwasher and could not use it Got on your online chat and was advised it was probably a faulty control panel. Ordered from you and installed without difficulty. Works great now. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Vernon D Greenfield , WI April 22, 2021 Lights were flashing on the front of my KitchenAid dishwasher Replaced control panel in 15 minutes and was all done. Great job Appliance Parts Pros! Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Michelle C Portsmouth , VA January 22, 2021 Control panel lights would flash or turn off completely at random and we couldn’t start a wash cycle Replacing the control panel fixed the problem! Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Morey G Wallkill , NY December 30, 2018 Appliance: KitchenAid Undercounter Dishwasher KUDS40CVWH4 Dishwasher control panel doa Had a power surge and the dishwasher panel would not respond, just blinking lights. Went to the forums and learned how to diagnose whether it was the control panel or control board- determined it was the panel, ordered from Appliance Parts Pros. The part was here the NEXT DAY! THANKS to Appliance Parts Pros I saved time and money! The best! Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
John V Melbourne , FL December 18, 2018 “Heavy duty” and “normal wash” lights flashing alternating control switches ineffective Reviewed symptoms on line. The majority opinion was that the control panel was the problem. In fact many of the switches felt “soft” and like they weren’t making contact. Ordered a new control panel. It arrived in two days and I installed it within 15 minutes. Works great now. You need a torx screwdriver Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Randolph L Springfield , MO May 13, 2017 Appliance: KitchenAid Undercounter Dishwasher KUDS30IVWH4 Panel lights alternately flash go out flash again different lights sometimes the machine cycles sometimes not To diagnose the problem, I reset the power. This would allow several wash cycles. However, randomly, different lights would flash and no cycles worked. I bought this panel and replaced it. Very simple. Remove 6 screws (T-15 torx). I carefully removed the control board and unhooked the flex circuit connector from the defective panel. I replaced it with the new panel flex circuit connector and snapped the board back into position. I found that the latch handle was also broken when I removed the panel. I repaired this.(a separate removal and replacement process) To determine if the latch handle is broken before you disassemble it, do the following. (So you can purchase a new latch as necessary) Use your fingers to actuate the handle. If it feels loose on one side, it is broken. An unbroken latch handle will not be floppy on one side. When in doubt, remove the panel and visually check. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Screwdrivers
James P Hartsville , SC August 21, 2016 Dishwasher touch screen had failed would not run Replaced touch screen panel Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers