*SAFETY* TURN YOUR BREAKER OFF TO YOUR STOVE FIRST BEFORE UNHOOKING WIRES TO ELEMENT!!! If you don't your wires will arc if they are touched to inner oven walls!!!!
The first thing I did was take the old element out, to test if it was the element that was faulty or the control panel. *CAFEFUL TO CHECK THAT THE WIRES THAT ARE HOOKED TO ELEMENT ARE NOT BARE* turn your breaker switch back on.
After hooking up my voltage meter and ohm meter up to the wires that hook to the element, I determined that it was the element that was faulty. *SHUT BREAKER BACK OFF*
Order new element and installed it. TURN BREAKER BACK ON