Peter E Mont Alto , PA November 07, 2015 Appliance: Maytag Gas Dryer SDG3606AWW Igniter not working Removed lower panel. Loosened one 5/16 bolt with wrench removed old Igniter put in new part reassembled and plugged in tested and worked great Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Screwdrivers, Wrench Set
James K Mamaroneck , NY October 05, 2015 Dryer not heating Suspected it was the igniter but could also be the gas valve. Ordered both parts on Wednesday night and they arrived on Friday. Installed the igniter and it fired right up. My wife was very happy that I save us $150. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Wrench Set
George L Brookfield , IL August 21, 2015 Ignighter for dryer was bad Replaced it with a updated design. Needed a new bracket to get fit Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers, Socket Set, Wrench Set
John S Alsip , IL June 14, 2015 Appliance: Maytag Gas Dryer MDG508DAWW Igniter opened so no heat ORDERED IGNITER FROM APPLIANCEPARTSPROS.COM AT 4 PM HAD IT IN MY HANDS NOON THE NEXT DAY AND I'M 100'S OF MILES FROM THEM. REPLACED BROKEN IGNITER. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Socket Set
David C Kittanning , PA March 21, 2015 Dryer would not heat Checked to find where the problem was and it was the igniter. Sent for a replacement and put it in. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Socket Set
Carl H Fontana , CA January 26, 2015 The unit stopped heating I replaced the igniter 1st as it did not glow and as I understood the operating of the system Gas would not flow if it did not. Replaced the old one but still no glow. I later went on this sight and watched tests of other involved components and followed them. The thermal switch wire connection crumbled as I wiggled the wire to test. I replaced both this and the other sensor on the gas for good measure (reasonable priced why not?) Worked like a charm. Lesson for all, insist loads are kept to factory recommended and CLEAN the lint filter each and every time!! Read More... Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Nut Drivers, Screwdrivers, Wrench Set
Robert M Riverside , CA December 15, 2014 It did not dry my clothes Got a new part from appliancePartRros and fix it . no place around me sells the part not Home Depot and noe w it works like new Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
Craig C Maryland Heights , MO December 15, 2014 No flame and ignitor not getting hot This dryer was left in a house my son purchased. I just went ahead and replaced the coils, flame sensor and ignitor and not it works fine. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers
Houston L Springfield , OH December 14, 2014 Appliance: Amana Gas Dryer NDG2330AWW Ignitor Installer new ignitor. While at it replaced following maintenance items ; drum rollers.glides,felts, belt, belt idler arm ass"y. Also thorough cleaning. Read More... Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Nut Drivers, Screwdrivers, Wrench Set
Raymond S Lowell , IN December 05, 2014 Appliance: Maytag Gas Dryer MDG3706AWW Maytag dryer no heat Replaced igniter and coil kit . Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Pliers, Screwdrivers