Roger P Phillipsburg , MO April 06, 2014 Evaporator fan motor quit Easiest fix I ever made! 8 screws to get to motor, 2 screws to get motor out. Replace old motor with new (perfect fit). Slapped it back together and done. Works great now! Read More... 16 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Socket Set
William K San Antonio , TX August 18, 2014 Appliance: Model KENMORE Refrigerator not cooling to safe temp freezer ok Shippment fast and part was installed (be sure to have gromets on hand),but part was not the problem...since the box was 14 yrs old ,I bought a new one. New refrigertors are fulll of surprises.The new Whirlpool I bought does not have a light in freezer comp.Also it woun't hold a gallon bottle of milk anywhere in in refrig compartment. There are too many things to think of when buying a new refrig.I was more concernned about quality.Salesmen won't tell you anything if they knew anything! It may be wise to have older ones repaired rather than rplacing, especially if you like the box. .,Measure large items in your box and when buying a new one see if there are any problem fitting them into box ! Hope this helps Read More... 9 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 2+ hours Tools: Nut Drivers
David D South Burlington , VT January 28, 2020 Refrigerator fan motor noisy Replaced the motor. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers
Peter H Orangevale , CA November 11, 2019 Appliance: KitchenAid Refrigerator KTRS21MDAL01 Squealing sound coming from refrigerator Ordered an evaporator fan motor from APP and replaced it myself for $80 Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers
Linda B Payette , ID November 06, 2019 Not defrosting and freezing food in the frig compartment I used the evaporator fan/motor and the bimetallic defrost sensor. It took longer to remove all the shelving and the ice bin than to do the actual repair. I allowed the ice to thaw and runoff while I worked. I had difficulty reaching the back of the freezer compartment because I am so short. Had to recruit my grandson for those parts. It was close quarters to work in there splicing wires for the sensor. It would have been easier with properly applied wire nuts. By the way, I'm a 72-year-old grandma (pretty handy in my day). If I can do it, you can too! Read More... Do-It-Yourself Rating: Repair Time Estimate: 2+ hours Tools: Nut Drivers
James B Pittsburgh , PA February 17, 2019 Evaporator fan out Model and part confirmation on the great web site. Ordered part then shipper delivered somewhere else and couldn't find it! Brandy in customer service was superb and sent a replacement part. Installed and fat and happy again. Excellent web site and customer service. Price was within range for sitting in my living room with no appliance store visits and model confirmation issue. 5 stars. Jim Ballash Pittsburgh PA 15122 Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers
Gary B Medford , OR June 25, 2018 Evaporator fan. Watched video & took only about half hr, as they said. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers
Allan B Jerseyville , IL March 26, 2017 Noise from the evaporator fan motor Changed motor. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers
David R Kenai , AK December 11, 2016 Appliance: Kenmore Refrigerator 10660282990 Freezer fan was making noise I called a tech. Put the phone in the freezer. He said it sounds like the bearing was going out on the fan motor. Then went to appliancepartspros.com per his request. Ordered the part it even showed up a day early. The video install made it a breeze. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers
Rick B N Canton , OH September 30, 2016 Evaporater fan motor Very easy just un screw every thing with a nut driver,undue the wire connections.And just reverse the process. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers