Jeffrey H Wilton , ND January 03, 2016 Appliance: Model WHIRLPOOL COMMERCIAL DRYER-CEM2760KQ3 The start button was not popping out ( no return tension) I ordered the switch-pb from appliance parts pros and the the fix was easy-need a torx bit to remove the front panel....Works great now !!! Thanks ! Read More... 2 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Frank D Cocoa Beach , FL February 01, 2026 Clothes dryer not working Replaced start switch, motor, and blower. Read More... Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Adjustable Wrench, Nut Drivers, Screwdrivers
Trent M Homer Glen , IL July 22, 2018 Loud noise when dryer drum was spinning. Dryer is a commercial model with a coin accepter. Had to take timer cover off to get at the nut that holds down upper cover. Took out screws in the lint trap and removed the trap. Unhooked the door switch. Removed front door screws and lifted the door out of the way and removed the drum. Cleaned all the lint out of the machine. Replace the support rollers which were bad. Replaced the belt and tentioner which are wear items. Inspected the seals which were ok. Reassembled the unit and tested it. Runs very quiet now. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Pliers, Screwdrivers
Terry H Independence , MO September 19, 2015 Appliance: Whirlpool Commercial Electric Dryer CEM2940TQ1 Dryer would stay on I replaced the controll swicth Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Pliers, Screwdrivers
Hojjat M Chicago , IL July 18, 2015 Appliance: Whirlpool Commercial Gas Dryer CGM2941TQ1 The dryer would run intermittently after the 45 minute cycle would end also the push button on the front panel switch would get stuck and would not pop back up Replaced the switch-pb, the cycling thermostat and thermal fuse. and everything is back to normal. it took about 30 minutes to install everything. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers
Karen A Medina , TX December 22, 2014 Dryer timer and switches Very well. Parts arrived on time, The dryer was repaired in less than 30minutes Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers, Socket Set, Wrench Set