Mica P Longmont , CO May 15, 2016 Dryer did not heat and the timer was nor working properly I installed the necessary parts. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Screwdrivers
Floyd G Tonkawa , OK November 19, 2023 Appliance: Roper Gas Dryer RGD4440VQ1 Broken timer switch Ordered new one. Two day delivery. 10 minute remove and replacement. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers
Manuel I Santa Maria , CA October 10, 2023 Dryer not heating. Replaced the timer, Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers
Mike Q Redondo Beach , CA February 02, 2019 Appliance: Maytag Gas Dryer AGD4475TQ1 Clothes were not drying properly I had a repairman come out to work on another appliance and I had them take a look at the Dryer. They quoted me $385 plus tax to repair. Yeah, Right ! I went online and found Appliance Parts Pros.com. The video on the site indicated what I thought was going to be an easy repair and they had the parts in stock. It took me roughly 30 min to install and test the new part. Well worth the time and effort to DIY and save a few hundred dollars in the process. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers
Todd S Vicksburg , MI January 13, 2019 Appliance: Model ADG4475TQ1 Dryer would not finish cycle worked fine til dial hit cool down part of cycle and dryer would stop Replaced cycle timer. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers
John D Sewaren , NJ March 09, 2017 Appliance: Model ADMIRAL DRYER Our dryer would not start ! I tested the door latch & the start button to see if they were working , I did this by taking the top back panel off , then I closed the door & put the plug back in , then I turned the timer & heat control dial to a on setting then I pushed the on button and you could here and see the timer was working ! The timer has a small sight glass that spins when it's on ! But the control knob was not engaging , so I took the control knob apart , this is when I found that one of the three washers was cracked , These washers engage all the electric points in the control knob ! So I ordered the parts , and they arrived in a day in a half , fast ! It took all 25 minutes to in stall the new control switch ! I also bought a new power button , did not need it , but I'll keep on the shelf ! Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers
Rhondi W Austin , TX October 01, 2016 Gas dryer needed a new timer I ordered the part and it came in a day and a half. My 11 year old granddaughter replaced the timer under the supervision of her dad! Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Screwdrivers
Jody B Prescott , AZ September 05, 2016 The dryer would not start We followed the order you suggested in testing things that might be wrong. Through the process of elimination, we decided it was the timer and ordered that part. That was the problem, and a simple problem to fix. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Donald B Apollo , PA August 12, 2016 Bad timer Replaced timer Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Screwdrivers
Rick K Redlands , CA July 04, 2016 Timer Replaced timer. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers