I noticed that there was water leaking out the front of the dishwasher door. The original hard plastic door seal was warped and had a piece broken off. This is not the rubber door seal along the side, but the hard plastic lower door seal. First, unplug the dishwasher or turn off the circuit breaker. I removed the screws from the inside of the door so that I could remove the front cover. Then, I also removed the hinges from the door. That gave me easy access to the tiny screws holding the plastic seal on. I notice other people have left the door on, but I found it easier to access the door seal screws this way. You will need to unplug the top control panel to remove the door. Replaced the piece and put everything back together. Also leveled the dishwasher a bit better. Works great. Pretty easy project over all. 30 minutes.