Parts for Ge WSM2780DBWWW: 02 - Door & Drum Parts

8 - 18 x 0.31

This replacement part is a ball bearing, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. This ball bearing is found in dryers and is an important part of the machine as a whole, even though this part is very small. Ball bearings are a rolling element that helps carries loads, reduces friction in the machine, and positions moving parts. The main purpose is to reduce rotational friction. A new ball bearing might be needed if the user notices that additional friction is being placed on the tub of the dryer. If the ball bearings are off-balanced, it is possible that the drum of the appliance will wobble and create loud noises during the drying cycles. Be sure the appliance is cooled down before attempting to replace this part. These ball bearings are sold individually even though dryers typically have more than one. This is a genuine OEM part.

Secures the front panel on dryers. Replace if the panel is loose, rattling, or won't stay in place. Confirm fit with your model number before ordering.

The Drum Support Bearing is an OEM part for GE dryers. This part allows the smooth rotation of the dryer drum. This small yet crucial component plays a pivotal role in the dryer's operation, supporting the back of the drum as it turns, and ensuring that clothes are dried evenly and efficiently.

Over time, the drum support bearing may wear out or become damaged due to the constant friction and heat generated during the dryer's operation.  

Symptoms of a bad Drum Support Bearing include:

• A squealing or grinding noise during operation, indicating that the bearing is worn out.
• Difficulty turning the drum by hand.
• Excessive vibration or shaking of the dryer.
• Increased drying times, as a result of the drum not maintaining the correct speed due to bearing friction.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Secures the rear drum bearing to keep your dryer drum aligned and rotating smoothly. Replace if bracket is cracked, bent, or worn to restore proper support.

Mounting screw for dryer cabinet and panel assembly. Replaces lost, stripped, or damaged screws during repairs or part installations. 10-16B x 1.375".

8 - 18 x 0.31

This upper drum felt is the replacement seal that cushions and guides the dryer drum for quieter operation and smoother rotation. It helps protect the drum edge and prevents clothes from catching where the drum meets the front bulkhead. What it does:

• Cushions the drum and reduces metal-on-metal rubbing that causes squeaks or grinding noises
• Keeps garments from getting caught between the drum and cabinet edge
• Helps maintain proper drum alignment for even rotation
• Limits lint and airflow loss at the drum front to support optimal drying performance

What's included: One upper drum felt seal Install notes:

• Disconnect power before servicing; for gas dryers also shut off the gas supply and disconnect the gas line per manufacturer instructions
• Remove the dryer front panel or bulkhead as required to access and replace the upper felt; keep track of fasteners and orientation
• Inspect the drum, drum rollers, glide, and lower felt while servicing and replace any worn parts to prevent premature wear of the new felt

This adhesive felt strip seals the gap between your dryer drum and the front panel. It prevents hot air from escaping and lint from building up in unwanted areas. Replace it if you notice excessive lint around the door area or reduced drying efficiency.

Front panel for washer dryer combo units. Installs as the main vertical face panel. Order a replacement if your panel is cracked, damaged, or broken.

Drum glide supports the front of your dryer drum for smooth rotation. Replace when you hear scraping or squeaking sounds. Confirm fit with your model.

This replacement part is a guide clip, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. This guide clip is typically found on dryers, and there are usually multiple clips on one appliance to ensure the panels are secure. These clips help hold the front panel in place and secure so that it does not come off during the drying cycle and the machine sometimes shakes. A new guide clip might be needed if the front panel of the dryer is off balance or not attached correctly. It is possible that the clips can become loose over time or during transport if the appliance was banged or damaged. The clips are important as it keeps the dangerous parts covered and away from people who can become injured. If the entire front panel can be lifted off then it is time to replace the guide clips. These clips are sold individually even though dryers typically have more than one. This clip is a genuine OEM part.

This is a 10-14 x 1.00 screw used to secure appliance panels and components. It provides a proper fit for threaded openings and restores fastener integrity after repairs. What it does

• Fastens panels, brackets and trim to the appliance frame
• Replaces missing or stripped screws that cause loose or rattling parts
• Secures components that require a 10-14 thread size with a 1.00" length

• Disconnect power to the appliance before servicing
• Use the correct screwdriver or driver bit to avoid cam-out and head damage
• Thread into matching 10-14 female threads only; do not force into incorrect or damaged holes
• Do not overtighten—stop when snug to avoid stripping threads or cracking panels

Replaces a cracked, broken, or missing dryer drum baffle that lifts and tumbles clothes during the drying cycle. Restores proper tumbling action.

Dryer drum shaft support with shaft assembly. Replace if drum drops, shaft breaks, or squealing occurs from worn bearings. Verify fit with your model.

Fix a washer dryer combo that overheats or won't start with this safety thermostat. Prevents damage by shutting off heat when temps get too high.

Door hinge for dryers. Attaches the door to the dryer cabinet frame, allowing it to open and close smoothly. Replace if cracked, broken, or worn.

Inner door panel for washer dryer combo units. Replaces cracked, damaged, or worn interior door panels. Mounts inside outer door assembly.

White