Parts for Ge WSM2780DBWWW: 05 - Tub & Motor Parts

This rubber agitator cap seal creates a watertight barrier at the base of the washer agitator to help prevent leaks and keep the transmission area dry. It's a simple replacement that restores proper sealing around the agitator. What it does:

• Seals the agitator base to reduce water entering the transmission and cabinet area
• Helps prevent leaks that can cause rust, puddling, or damage under the washer
• Keeps contaminants and detergent residue out of the gearcase area
• Supports consistent wash performance by maintaining a dry drive assembly

• Disconnect power and turn off the water supply before starting any repair
• Remove the agitator cap and agitator per your model's service instructions to access the seal
• Inspect surrounding parts (agitator cap, agitator, and shaft) for wear and clean mating surfaces before installing the new seal

This short vertical spring provides the tension needed for the appliance's vertical hinge or mounting assembly, restoring proper movement and alignment for smooth operation and secure closure. What it does:

• Supplies vertical tension to a hinge or mounting assembly to maintain proper positioning
• Helps restore even, controlled movement of doors, panels or drawers
• Reduces sagging, slipping or uneven closing caused by a worn spring
• Minimizes rattling or misalignment during normal use

• Disconnect power to the appliance before beginning any repair.
• Springs can be under tension — wear safety glasses and use appropriate tools.
• Inspect mating hardware (clips, pins, brackets) for wear and replace if needed.

The V Belt is an OEM part for GE washing machines. This belt connects the drive motor to the washer's drum, facilitating the rotation of the drum during the wash and spin cycles. 

Causes of a bad V belt can include wear and tear from continuous use, stretching, fraying, or snapping due to overloading or improper installation. 

Symptoms of a bad V belt include:

• The washer drum not spinning or agitating
• Unusual noises, such as squealing or slapping, during operation
• A burning rubber smell coming from the washer
• The washer stopping mid-cycle or not completing cycles properly

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This suspension spring supports the washer tub and helps stabilize the drum during cycles, reducing excessive movement and vibration for smoother operation. It restores proper tub positioning and helps prevent noisy, off-balance spins. What it does:

• Cushions and centers the washer tub to limit excessive vibration and shaking during spin cycles
• Helps maintain correct tub alignment for smoother, quieter operation
• Can reduce symptoms such as loud banging, rocking, or uneven spinning
• Works with the washer's suspension system to protect other components from stress

• One washer suspension spring

• Disconnect power and water supply before servicing
• Support the tub or cabinet while removing/installing the spring to prevent sudden movement
• Inspect other suspension components (shocks, mounts, springs) and replace as needed for best results

The Washer Fill Hoses are OEM parts for various washing machines, specifically designed to transport hot and cold water from the home's supply lines to the washer. These hoses are essential for the proper functioning of the washing machine, ensuring a steady and reliable flow of water during the wash and rinse cycles. Coming in packs of 2, each hose measures 5 ft.

Causes of bad washer fill hoses can include wear and tear over time, exposure to high water pressure, or damage from kinks and bends. Additionally, hoses can deteriorate due to exposure to harsh water conditions or chemical buildup.

Symptoms of bad washer fill hoses include:

• Leaks or puddles around the washing machine
• Reduced water flow into the washer
• Visible cracks or bulges in the hoses
• The washer taking longer than usual to fill with water

These washer fill hoses are compatible with a variety of washing machine brands and models, ensuring a secure and efficient water supply.

This dryer hose clip secures the exhaust hose to the dryer's cabinet for a stable, sealed connection. A small but essential fastener, it helps keep the vent attached so airflow is directed out of the appliance. What it does

• Fastens the exhaust/vent hose to the dryer cabinet to maintain a secure connection.
• Helps reduce air leaks at the hose-to-cabinet joint that can cause reduced venting efficiency.
• Prevents the hose from slipping off during operation, which can cause vibration or rattling.
• Keeps the vent path aligned to reduce lint buildup at the connection point.

• One dryer hose clip.

• Disconnect power (unplug electric or shut off gas and unplug) before servicing the dryer.
• Remove the dryer vent hose and position the clip over the hose and cabinet fitting; secure per OEM orientation.
• Tighten only to snug — avoid over-tightening which can deform the hose or cabinet inlet.
• Inspect the hose and cabinet inlet for damage; replace damaged components to ensure a proper seal.

This ring drain hose is the replacement drain tube that routes and removes water from the appliance, restoring proper drainage and preventing leaks or standing water in the wash area. Designed to match the original fit and function. What it does:

• Channels wastewater from the tub/pump to the household drain to maintain normal drain cycles
• Restores proper drainage when the original hose is cracked, kinked, or leaking
• Helps prevent leaks and water damage caused by failed or deteriorated hoses
• Compatible with compatible stock mounting points for a like-for-like replacement

• One ring drain hose (1 piece) as pictured

• Disconnect power and water supply before servicing to avoid shock or flooding
• Inspect adjoining clamps and fittings; replace clamps if corroded or damaged for a secure seal
• Ensure hose routing is free of sharp bends or kinks and is secured per the appliance's service instructions

This thrust washer cushions and spaces the washer transmission/tub interface to reduce wear and help maintain smooth spin and agitation. It's a small, replaceable wear part that restores proper alignment and reduces abnormal noise or vibration. What it does:

• Provides a wear surface between the transmission and inner tub to prevent metal-on-metal contact
• Helps maintain correct tub height and alignment for smooth spinning and reduced wobble
• Commonly replaced when worn, cracked, or missing parts cause knocking, grinding, or excessive vibration
• Supports consistent drive engagement and helps prevent premature transmission wear

• One thrust washer

• Disconnect power and water supply before servicing the washer
• Drain the tub and secure or support the inner tub/tub assembly per service instructions to avoid injury
• Removal typically requires disassembling the washer cabinet and detaching the transmission or tub components;
• Use only OEM-specified parts and follow torque/clearance specs from the manufacturer when reassembling