Parts for Ge CT9800SH2SS: Door Parts

This door liner kit replaces a damaged or worn refrigerator door interior to restore a clean, sealed surface and improve door appearance. Designed to fit the OEM mounting points for a proper fit and reliable performance. What it does:

• Replaces cracked, warped, stained or otherwise damaged door liner surfaces
• Restores a smooth interior surface to help door shelves and bins mount correctly
• Helps maintain a consistent door seal by providing a true mounting surface for gaskets and hardware
• Improves overall appearance of the refrigerator door interior

• Disconnect power to the appliance before beginning service
• Remove door shelves, bins, and any trim before removing the old liner
• Retain and reuse any existing screws, clips, or hardware unless replacements are provided in the kit

This door insulation retainer is a small plastic clip that secures insulation inside a refrigerator/freezer door to help maintain proper temperature and reduce noise. It replaces worn or missing retainers to keep the door liner insulation in place. What it does:

• Secures the door insulation to the inner door liner so insulation stays positioned
• Helps prevent insulation from shifting or sagging that can affect door seal performance
• Commonly used when insulation falls out or the liner shows gaps around the insulation
• Works as a direct-fit replacement for the original retainer designed for the door assembly

• One door insulation retainer clip

• Installation generally requires removing the door panel or liner; keep track of fasteners and trim
• Handle the door liner and insulation carefully to avoid damage or tearing the insulation
• Use proper tools and disconnect power if working near electrical components or lights
• Replace all affected clips for an even, secure fit

A replacement liner support that secures the refrigerator cabinet liner and keeps interior trim and panels aligned for a proper seal and appearance. Restores stability to cracked or broken support points. What it does:

• Holds the cabinet liner and interior trim in position to prevent gaps and movement
• Helps maintain door seal alignment by keeping liner edges stable
• Reduces rattling or shifting caused by a damaged support
• Commonly replaced when liner pieces are cracked, broken, or loose

• One liner support

• Disconnect power to the appliance before beginning any repair
• Remove food, shelves, and trim pieces as needed to access the damaged support
• This part typically secures with clips or fasteners; inspect existing hardware and replace if necessary

The Oven door gasket is an OEM part for GE wall ovens and ranges. It fits around the inner rim of the oven door, creating an essential heat and air seal when closed. 

Symptoms of a bad door gasket include: 

• Excessive heat loss around the door when preheating or cooking  
• Ghosting or condensation buildup visible on the door glass
• Worn or misshapen gasket that no longer presses firmly against the door rim

Gasket material naturally hardens over time through repeated exposure to temperature changes. Accidental damage from cleaning can also impact the gasket's integrity. Replacing it with this genuine GE part helps maintain an efficient cooking environment. 

This OEM GE replacement gasket is also compatible with some Kenmore, Hotpoint, and RCA wall oven and range models. Proper sealing is important for energy efficiency as well as consistent cooking results.
 

A replacement door handle and end cap assembly that restores secure grip and a finished appearance to your appliance door. Replaces a broken, loose, or cracked handle endcap so the door is easier and safer to open. What it does

• Replaces damaged or worn handle and end cap to restore proper door grip and alignment
• Prevents sharp edges or loose parts that can catch or cause injury when opening the door
• Stops rattling or wobble caused by a cracked end cap or failing attachment points
• Matches the original fit and mounting points for straightforward replacement

• One handle and end cap assembly

• Basic hand tools typically required;
• Remove power or unplug appliance if removing a door where wiring is present; otherwise follow lockout/tagout best practices
• Handle parts can be sharp—wear gloves and protect finishes during installation
• Keep all fasteners and small parts;

A replacement stainless outer door front panel that restores the refrigerator's exterior finish and protects internal door components. Ideal when the existing outer door is dented, scratched, or corroded and needs a like-for-like cosmetic repair. What it does:

• Replaces damaged or cosmetically worn outer door surface to renew appearance
• Covers and protects the inner door structure and hardware
• Helps prevent further rust or corrosion on the refrigerator front
• Useful when dents, deep scratches, or finish damage are visible

• Disconnect power to the appliance before starting any repair
• Handle edges carefully to avoid cuts; door panels can have sharp edges
• Installation typically requires removing the inner door panel and existing fasteners; keep all hardware organized

This right-hand replacement door hinge secures and pivots the appliance door, restoring proper alignment and smooth opening/closing. It helps fix a sagging, misaligned or noisy door so the seal closes correctly. What it does

• Replaces the right-hand hinge that supports and guides the door pivot.
• Helps correct a door that sags, drags, or does not seal tightly.
• Stops rubbing, binding, or grinding noise caused by a worn hinge.
• Restores proper door alignment for better cooling performance and gasket contact.

• One right-hand door hinge

• Unplug the appliance or disconnect power before beginning work.
• Support the door while removing/installing the hinge to prevent dropping or damage.
• Reuse existing mounting hardware only if undamaged; replace stripped or bent fasteners.
• After installation, check door alignment and gasket seal; adjust hinge position as needed.

This left-side refrigerator door hinge replaces a worn or damaged hinge to restore proper door alignment and smooth opening. It secures the door to the cabinet and helps maintain a tight seal for efficient cooling. What it does:

• Provides the pivot point for the left refrigerator door so it opens and closes smoothly
• Helps keep the door aligned to prevent rubbing, gaps, or scraping
• Supports the door weight to reduce sagging and strain on the seal
• Can resolve symptoms like uneven door gap, noisy movement, or doors that won't stay closed

• Unplug the appliance or shut off power before beginning any work
• Support the door while removing and installing the hinge to prevent drops or injury
• Retain and reuse any original screws or fasteners unless replacements are provided

This replacement oven door window glass restores a clear view into the oven and helps maintain proper heat containment. Replace a cracked, shattered, or clouded window panel to keep cooking safe and your appliance looking like new.

• Creates the transparent viewing window in the oven door
• Helps retain heat and maintain a proper door seal
• Direct replacement for cracked, shattered, scratched, or stained glass
• Typical symptoms: visible damage, fogging between panes, loose/rattling window, or noticeable heat loss at the door

• Disconnect power and allow the oven to cool completely
• Wear cut-resistant gloves and eye protection; handle glass carefully
• Remove the door and lay it flat on a padded surface; transfer any brackets, trim, or gasket from the original glass as required by your model
• Reassemble carefully; do not overtighten fasteners and verify the door seals and operates properly

This inner oven door window spacer positions and cushions the glass inside the oven door assembly to help maintain a secure fit and proper spacing. It supports safe, consistent sealing and helps prevent rattling or glass contact with the inner panel. What it does:

• Keeps the inner oven door glass properly spaced from the door frame and outer glass
• Cushions the glass to reduce vibration and rattling during operation
• Helps maintain an even seal to support temperature stability inside the oven
• Prevents direct glass-to-metal contact that can cause chipping or stress

• One oven door window spacer

• Designed for use inside the oven door assembly; door disassembly is usually required
• Handle glass and spacer carefully to avoid chips or cuts; use gloves and safety glasses
• Disconnect power to the appliance before starting any repair and follow OEM instructions

ST10-16 X 7/16"

Black. 8-18 AB HXW 3/8

This 10-32 machine screw secures brackets, panels, and other hardware in cooking appliances. Replacing a missing or stripped screw restores a snug, rattle-free fit and keeps components aligned and safely fastened. What it does:

• Fastens panels, brackets, and components using a 10-32 machine thread
• Replaces hardware that is missing, rusted, or stripped
• Helps address loose or rattling parts and minor panel misalignment
• Maintains secure mounting after service or part replacement

• One 10-32 machine screw

• Disconnect power; for gas appliances, also shut off gas before service
• Support the panel or bracket while removing/installing hardware
• Start threads by hand to avoid cross-threading; do not overtighten
• Replace them one at a time to keep alignment