Parts for Kenmore 253.67170508 (25367170508, 253 67170508): Door Parts

Creates an airtight seal to keep cold air in and moisture out. Replace if torn, worn, or causing the door to pop open. Confirm fit with your model.

Seals freezer door to prevent air leaks and maintain temperature. Replace if door won't stay closed or gasket is torn. Confirm fit with your model number.

Replace your refrigerator door gasket to restore an airtight seal, prevent warm air entry, and improve cooling efficiency. Easy press-in install.

Seals the refrigerator door to prevent cold air loss and maintain efficiency. Replace if torn, cracked, or not sealing properly. Verify fit by model.

Replaces cracked, broken, or missing dairy compartment door on your refrigerator. Installs on the inside of the main door to restore access and freshness.

Bisque plug insert for refrigerator door hinge bearing hole. Replaces missing, cracked, or damaged plugs. Covers hinge pin opening for clean finish.

This small black plug/button covers a hinge or bearing access hole to restore a finished appearance and help keep out dirt and debris. It's a simple, inexpensive trim piece that maintains the appliance's look and helps protect internal components. What it does:

• Covers exposed hinge or bearing access holes for a clean, finished appearance
• Helps keep dust and debris out of hinge or bearing cavities
• Prevents snagging and reduces the chance of small items entering the opening
• Matches factory appearance and fit for a seamless repair

• Push-fit design; press into the hole until fully seated
• Keep away from small children — small part is a choking hazard

Color: White. Used to cover the hinge bearing hole.

This replacement freezer door restores a sealed, insulated closure and the exterior appearance of the freezer compartment. It installs in place of a damaged or dented door to help maintain proper cooling and prevent frost buildup. What it does:

• Replaces a cracked, dented, or damaged freezer door to restore proper closure and insulation
• Helps maintain the internal temperature by providing a tight seal when aligned correctly
• Prevents cold air loss that can lead to frost buildup and reduced efficiency
• Restores the cabinet's exterior appearance for a clean, finished look

• Disconnect power to the appliance before starting any repair
• Door assemblies are often heavy and awkward—use two people to avoid injury and prevent damage
• Keep original fasteners and gaskets unless the replacement explicitly includes them
• Check door alignment and latch/hinge operation after installation

This replacement freezer door restores the exterior access and insulation barrier for your freezer compartment, helping maintain proper cooling and protect stored food. It ships as the full door assembly for straightforward replacement. What it does:

• Replaces a damaged, dented, or cracked freezer door that reduces insulation effectiveness
• Restores proper door alignment and sealing to help prevent cold air loss and frost buildup
• Provides the exterior panel and mounting surface for hinges, handles, and gasket
• Helps the appliance maintain interior temperature by closing and sealing correctly

• Disconnect power before starting; this part may be heavy—use two people to avoid injury
• Retain or transfer existing hinges, handle, gasket, and mounting hardware unless new hardware is explicitly included
• Use basic hand tools and follow OEM instructions for alignment to ensure a proper seal

This freezer door restores a secure, insulated closure to the freezer compartment and improves the appliance's appearance. It replaces a damaged, dented, or warped door to help maintain proper cooling and energy efficiency. What it does:

• Replaces the freezer compartment's outer door panel to restore a tight seal and proper closure.
• Helps stop cold air loss that can cause excessive frost, longer run times, or warm/freezer temperature issues.
• Restores the exterior finish and protects internal door components from damage.
• Useful when the original door is dented, cracked, bent, or has cosmetic damage.

• One freezer door outer panel

• Disconnect power to the appliance before starting any repair.
• Support the door while removing hinge fasteners; doors are heavy and can shift unexpectedly.
• Hinge screws, trim, handle, gasket, or insulation may need to be transferred from the old door.
• After installation, check door alignment and seal; adjust hinges as needed for a proper fit.

This replacement door stop helps keep a refrigerator door from swinging past its intended range, protecting the hinge and cabinet. Fits at the door hinge area to restore correct stopping and smooth door motion. What it does:

• Limits door travel to prevent over-rotation and cabinet damage
• Helps maintain proper door alignment for a secure seal
• Stops excessive force that can stress hinges or cause the door to come off
• Commonly replaced when the door no longer stops or binds during opening/closing

• One door stop

• Unplug the appliance or disconnect power before beginning any repairs
• Access may require opening the hinge cover or removing the door
• Use appropriate tools and avoid overtightening fasteners to prevent damage

Replaces a broken or worn refrigerator door stop that limits door travel. Prevents over-rotation damage to hinges and cabinet. Restores smooth closing.

Limits refrigerator door swing to prevent overextension and protect hinges. Replace if cracked, broken, or missing to restore controlled door movement.

Limits door opening angle to prevent overextension and cabinet strikes. Replace if worn, broken, or missing to restore controlled door travel.

Plastic door stop that cushions refrigerator door closure and prevents impact damage to walls or cabinets. Replace if cracked, broken, or missing.

Bisque-colored plug insert for refrigerator control panels. Replaces missing, cracked, or discolored button plugs to restore a clean appearance.

Black plug button that covers exposed holes or openings in refrigerator doors and panels. Restores a finished look and keeps dirt out of unused mounting holes.

Color: White

Outer door panel for your refrigerator. Replaces cracked, dented, or discolored exterior panels. Restores the appearance of your fridge door.

Black freezer door handle for refrigerators. Replaces cracked, broken, or loose handles on freezer compartment doors. Direct-fit replacement part.

This is a replacement door handle for select refrigerators. A secure, intact handle makes it easier to open and close the door and helps ensure a consistent seal.

• Provides a sturdy grip to open and close the refrigerator door
• Worn, cracked, or loose handles can feel wobbly, look damaged, or come off the door
• Restores appearance and usability of the door

• Unplug the appliance before beginning
• Handle typically attaches with concealed screws; transfer any end caps or trim from the old handle if reused
• Support the handle while tightening screws to avoid misalignment
• Do not overtighten; verify a firm, even fit

White refrigerator door handle attaches to the fresh food door for a secure grip. Replace yours if cracked, broken, loose, or missing to restore function.

Replacement mounting screw for refrigerator panels, trim, and brackets. Needed when original screws are missing, stripped, or damaged during repairs.

Replacement screw that secures refrigerator door handles to the door. Needed when the original screw is worn, missing, or stripped, causing a loose handle.

Replacement mounting screw for refrigerator panels, handles, brackets, and internal fixtures. Order when original screws are stripped, lost, or damaged.

The Screw is an OEM part for Frigidaire appliances. This specific screw is designed for Frigidaire models, ensuring a secure fit and proper function in the appliance assembly. Screws like this one are critical for holding components together tightly, contributing to the overall stability and durability of the appliance. Whether used in refrigerators, ovens, washers, or dryers, this screw plays a pivotal role in assembly and maintenance tasks, ensuring parts remain securely fastened during operation.

Over time, screws can become loose, stripped, or lost during repairs or adjustments, potentially compromising the appliance's integrity and performance.  

Symptoms of needing replacement screws include:

• Loose parts or panels on the appliance
• Difficulty in securing components during assembly or maintenance
• The need to replace lost or damaged screws during repair work

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Nylon bearing that fits on the door hinge pivot point. Replace when worn, cracked, or missing to prevent door sagging and alignment issues.

Refrigerator door hinge bearing provides smooth pivot action for proper door operation. Replace if door sags, sticks, or pops open. Confirm fit with your model number.

Replace your refrigerator's handle trim piece. This decorative cover installs over the door handle. Order a new trim if yours is cracked or missing.

Storage bin that installs in refrigerator door for organizing condiments and beverages. Replace if cracked, broken, or missing for restored storage.

Replacement door shelf bin for refrigerator doors. Installs on door to store condiments and bottles. Order if your original bin is cracked or broken.

Replace your broken, cracked, or missing freezer door shelf. This storage bin installs in the freezer door to organize frozen items. Easy snap-in install.

Plastic mounting block that anchors the refrigerator door handle assembly. Replace if cracked, broken, or causing a loose handle from repeated use.