Parts for Kenmore 253.77952801 (25377952801, 253 77952801): Door Parts

Seals your freezer door to prevent warm air entry and ice buildup. Replace if door won't close tightly or frost forms around edges. Verify fit with your model.

Seals freezer door to prevent warm air entry and cold air loss. Replace if you notice frost buildup, poor sealing, or rising temps. Confirm fit with model.

Replace your refrigerator door gasket to restore an airtight seal, prevent warm air entry, and improve cooling efficiency. Easy press-in install.

Seals the refrigerator door to prevent cold air loss and maintain efficiency. Replace if torn, cracked, or not sealing properly. Verify fit by model.

Replaces cracked, broken, or missing dairy compartment door on your refrigerator. Installs on the inside of the main door to restore access and freshness.

Small plastic push button for refrigerator control panels. Replaces cracked, worn, or missing buttons to restore tactile control and complete appearance.

Bisque plug insert for refrigerator door hinge bearing hole. Replaces missing, cracked, or damaged plugs. Covers hinge pin opening for clean finish.

This small black plug/button covers a hinge or bearing access hole to restore a finished appearance and help keep out dirt and debris. It's a simple, inexpensive trim piece that maintains the appliance's look and helps protect internal components. What it does:

• Covers exposed hinge or bearing access holes for a clean, finished appearance
• Helps keep dust and debris out of hinge or bearing cavities
• Prevents snagging and reduces the chance of small items entering the opening
• Matches factory appearance and fit for a seamless repair

• Push-fit design; press into the hole until fully seated
• Keep away from small children — small part is a choking hazard

Color: White. Used to cover the hinge bearing hole.

Outer door panel for refrigerator freezer compartment. Replaces cracked, dented, or damaged exterior door surfaces. Restores appearance and protects insulation.

Outer freezer door panel for top-mount refrigerators. Restores exterior appearance when original panel is dented, cracked, or cosmetically damaged.

This replacement door stop helps keep a refrigerator door from swinging past its intended range, protecting the hinge and cabinet. Fits at the door hinge area to restore correct stopping and smooth door motion. What it does:

• Limits door travel to prevent over-rotation and cabinet damage
• Helps maintain proper door alignment for a secure seal
• Stops excessive force that can stress hinges or cause the door to come off
• Commonly replaced when the door no longer stops or binds during opening/closing

• One door stop

• Unplug the appliance or disconnect power before beginning any repairs
• Access may require opening the hinge cover or removing the door
• Use appropriate tools and avoid overtightening fasteners to prevent damage

Replaces a broken or worn refrigerator door stop that limits door travel. Prevents over-rotation damage to hinges and cabinet. Restores smooth closing.

Limits refrigerator door swing to prevent overextension and protect hinges. Replace if cracked, broken, or missing to restore controlled door movement.

Limits door opening angle to prevent overextension and cabinet strikes. Replace if worn, broken, or missing to restore controlled door travel.

Plastic door stop that cushions refrigerator door closure and prevents impact damage to walls or cabinets. Replace if cracked, broken, or missing.

Bisque-colored plug insert for refrigerator control panels. Replaces missing, cracked, or discolored button plugs to restore a clean appearance.

Refrigerator plug button insert for top-mount models. Replaces cracked, broken, or missing plug buttons. Installs in refrigerator body or door panel.

Black plug button that covers exposed holes or openings in refrigerator doors and panels. Restores a finished look and keeps dirt out of unused mounting holes.

Color: White

Outer door panel for your refrigerator. Replaces cracked, dented, or scratched exterior panels. Restores the cosmetic appearance of your fridge door.

Outer door panel for refrigerators. Replaces cracked, dented, or damaged exterior door surfaces. Restores appearance and protects inner components.

This replacement door handle restores a secure grip and smooth opening on compatible refrigerators. It replaces cracked, loose or broken handles so you can open the door safely and comfortably. What it does

• Provides a durable gripping surface to open and close the refrigerator door
• Replaces handles that are cracked, split, stripped or otherwise damaged
• Helps restore proper door alignment and latch engagement when handle damage interferes with operation
• Matches original fit and mounting points for a straightforward swap

• Disconnect power to the appliance or unplug the unit before starting work
• Empty or support the door to prevent shifting while removing/installing the handle
• Use basic hand tools (screwdriver/socket) and follow factory fastener torque—do not overtighten

This replacement door handle restores a secure grip and normal door operation on compatible refrigerators. It gives a finished appearance and replaces cracked, broken, or loose handles so the door opens and closes reliably. What it does:

• Provides a secure grip for opening and closing the refrigerator door
• Replaces damaged, cracked, or loose handles that impede normal use
• Restores proper door fit and appearance when the original handle is worn or broken
• Works with the door mounting points and hardware designed for this handle

• High-level: remove power and empty the door area before starting for easier access
• Many installs require removing end caps or inner door panel screws to access handle fasteners
• Use appropriate hand tools (screwdriver, socket) and avoid overtightening fasteners
• If metal edges are present, wear gloves to prevent cuts; keep small fasteners away from children

This replacement door handle restores a damaged or missing refrigerator door grip so the appliance opens and closes safely and securely. Designed to match factory fit and finish for a clean, reliable repair. What it does:

• Replaces a cracked, broken or worn door handle to restore normal opening and closing
• Provides a secure grip and proper alignment for the refrigerator door
• Helps prevent further damage to the door surface and latch by restoring correct leverage
• Fits the OEM mounting locations for a factory-like appearance

• Remove power or unplug the appliance and open the door to a stable position before starting
• Use basic hand tools; support the door while removing and reinstalling the handle to avoid damage
• Keep mounting screws and any trim pieces; install exactly as removed to maintain seal and alignment

Replacement mounting screw for refrigerator panels, trim, and brackets. Needed when original screws are missing, stripped, or damaged during repairs.

Replacement screw that secures refrigerator door handles to the door. Needed when the original screw is worn, missing, or stripped, causing a loose handle.

Replacement screw secures door handles, brackets, panels, and trim to refrigerator mounting points. Install when hardware is missing, stripped, or loose.

Replacement mounting screw for refrigerator panels, handles, brackets, and internal fixtures. Order when original screws are stripped, lost, or damaged.

Nylon bearing that fits on the door hinge pivot point. Replace when worn, cracked, or missing to prevent door sagging and alignment issues.

Refrigerator door hinge bearing provides smooth pivot action for proper door operation. Replace if door sags, sticks, or pops open. Confirm fit with your model number.

Replacement butter dish for refrigerator door dairy compartment. Restores secure storage when original is cracked, broken, or missing. Fits top-mount models.

Storage bin that mounts inside your refrigerator door for organizing condiments, beverages, and jars. Replace if cracked, broken, or missing.

Replacement door shelf bin for refrigerator doors. Installs on door to store condiments and bottles. Order if your original bin is cracked or broken.

Replace your broken, cracked, or missing freezer door shelf. This storage bin installs in the freezer door to organize frozen items. Easy snap-in install.