Parts for Kitchenaid KMHC319EBS0: 03 - Door Parts

The Control Board is an OEM component specifically designed for Whirlpool microwaves. It works behind the scenes to operate and control all microwave functions through its built-in computer chip and electronic components. 

The control board allows for accurate monitoring and control of cooking times and power levels through its programming. It facilitates the user interface and relays instructions from the buttons and display to the microwave's internal mechanisms.

Symptoms of a bad control board can include: 

• Microwave not heating or heating unevenly  
• Display/buttons malfunctioning or non-responsive
• Unexpected beeping or noise issues
• Inability to start or stop cooking functions

Causes of a bad control board are usually due to normal wear and tear over time. Occasionally, damage can occur from moisture exposure, power surges, or physical trauma.

This OEM Whirlpool replacement part is compatible with Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and select Kenmore microwaves.

This support bracket secures internal components or panels to keep assemblies aligned and stable, helping prevent looseness or vibration for reliable appliance operation. What it does:

• Provides structural support for panels, controls, or internal assemblies
• Keeps components properly aligned to reduce rattling or vibration
• Prevents sagging or misalignment that can affect door/console fit
• Restores secure mounting after damage or wear

• Disconnect power (and water if applicable) before starting any repair
• Keep original fasteners where possible; replace damaged hardware as needed

This genuine replacement door handle restores a secure grip and normal door operation on compatible Whirlpool refrigerators, making it easier to open and close the door and improving the appliance's appearance. What it does:

• Replaces a cracked, broken, loose, or worn refrigerator door handle
• Provides a stable grip so the door opens and closes smoothly
• Helps maintain proper door alignment and sealing when attached correctly
• Restores the cabinet finish where the original handle was damaged or missing

• Installation requires removing the old handle and securing the replacement with the existing screws or clips; follow manufacturer instructions.
• Keep the appliance unplugged or power to the dispenser/ice controls off if handle removal affects electrical components.
• Handle with care to avoid scratching finished surfaces; use a soft cloth when handling and aligning.
• Replace fasteners with OEM-specified hardware for a secure fit.

The Microwave Handle Spacer is an OEM component designed for Whirlpool brand countertop microwaves. This plastic spacer fits between the door handle and outer case to provide structure and proper spacing. 

Symptoms of a bad spacer include: 

• Loose or misaligned door handle  
• Excessive play or movement of the handle when opening/closing the door
• Noise or rattling coming from the door handle area
• Damage or wear visible on the spacer itself

Causes can be regular use over time breaking down the integrity of the spacer material, or impact injury compromising its form and function.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: Black

The Support Bracket (Black) is an OEM part for Whirlpool over-the-range microwaves. It serves as a mounting bracket to securely install the microwave in its space above the cooktop. 

Causes of a bad Support Bracket (Black) can include cracks or breaks over many years holding the weight of the microwave. Vibrations from cooking below may also weaken or damage its structural integrity.

Symptoms of a bad bracket support include: 

• An unstable or insecure microwave installation
• Inability to properly level or adjust height 
• Possible injury concerns if the microwave dislodges

This genuine Whirlpool replacement is compatible with additional brands such as Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore as well.

This door latch is the replacement latching mechanism that secures the appliance door during operation, restoring proper door closure and safe operation. It fits the factory mounting and engages/disengages the door as designed. What it does:

• Secures the door closed so the appliance can run and maintain temperature or cycle safety systems
• Replaces a broken, worn, or loose latch that won't hold the door shut
• Commonly used when the door won't stay closed, won't latch, or the appliance won't start because the door is not detected as closed
• Engages with the door strike to ensure a positive, spring-loaded closure

• One door latch

• Disconnect power (unplug or switch off breaker) before beginning any repair
• Access may require removing the oven/dryer front panel or door trim
• Align the latch with the mounting holes and secure with the original screws; test latch operation before fully reassembling
• If electrical connectors are present, ensure they are fully seated and undamaged

This replacement access panel cover protects internal components and restores the appliance's finished appearance. It keeps wiring and assemblies shielded while helping maintain safe, reliable operation. What it does:

• Shields internal components from dust, lint and accidental contact
• Restores a secure, finished cabinet or console surface after repair
• Helps prevent debris from entering sensitive areas that can cause faults
• Matches OEM fit and mounting points for direct replacement

• One replacement cover

• Disconnect power (unplug or shut off breaker) before starting any repair
• Remove fastening screws or clips that hold the original cover in place; retain hardware if reusing
• Align mounting holes and secure the new cover without over-tightening fasteners

Color: Black

This small retainer clip secures appliance components to keep panels, trims, or assemblies properly positioned—helping reduce vibration, noise, and misalignment for reliable everyday operation. What it does:

• Holds a panel, trim or internal component in place to prevent shifting during use
• Reduces rattling, buzzing or vibration caused by loose parts
• Helps maintain proper alignment of assemblies for consistent performance
• Useful when a damaged or missing clip allows parts to come loose

• Disconnect power to the appliance before beginning any service
• Use basic hand tools to remove the affected trim or panel and access the clip location
• Observe clip orientation and engagement points; install in the same position as the original
• Replace only with the correct part number to ensure proper fit and function

This COVR-CHOKE is a replacement protective cover that shields the choke/coil assembly and nearby wiring. Restores the original protection to help prevent contact with debris and reduce risk of component damage. What it does:

• Protects the choke/coil and adjacent electrical connections from debris, spills, and accidental contact
• Helps keep wiring and terminals covered to reduce wear and potential shorting
• Replace if the cover is cracked, broken, missing, or showing signs of heat damage
• A damaged or missing cover may coincide with visible arcing, burning smell, or intermittent electrical behavior

• Disconnect power to the appliance before servicing to avoid shock or injury
• Remove the appropriate access panel to reach the choke area; retain hardware for reassembly
• Align the replacement cover and secure with the original screws or mounting tabs
• If mounting tabs or surrounding components are damaged, inspect related parts.

This inner oven door glass replaces a cracked or cloudy panel to restore visibility and maintain the oven door seal. It fits the oven door assembly and provides a clear viewing area for safe cooking monitoring. What it does:

• Replaces damaged or shattered inner oven door glass to restore safe, clear viewing.
• Helps maintain proper heat containment by restoring the door's glass panel.
• Reduces heat loss and prevents loose glass fragments from entering the oven cavity.
• Commonly used when glass is cracked, chipped, fogged, or compromised after impacts.

• High-level replacement only; refer to your oven's service manual for step-by-step disassembly and reassembly.
• Disconnect power to the appliance before beginning any repairs to avoid shock or injury.
• Handle glass with gloves and eye protection; support the door assembly to prevent falls or damage.
• If clips, gaskets, or fasteners appear damaged during removal, replace them per the OEM parts list.

This wire harness routes power and signals between key components for consistent performance. Replacing a damaged harness restores reliable connections and correct operation of affected controls, motors, or sensors.

• Distributes electrical power and control signals between boards, switches, sensors, and motors
• Replaces cut, brittle, burned, or corroded wires and terminals that cause connection faults
• Common symptoms include intermittent operation, a component that won't run, or error codes related to poor connections
• Restores proper wire routing when installed in the factory path and secured with clips/ties

• Disconnect power before servicing; turn off water or gas supply if applicable
• Photograph and label existing connections; move plugs one at a time to the new harness
• Route along the original path; secure in clips/ties and keep clear of sharp, hot, or moving parts
• Seat each connector fully by the plug body (do not pull on wires); inspect mating terminals for heat damage

This name plate is the appliance's model and serial identification label—an easy way to restore clear product ID for service, parts ordering, and warranty records. Keeps your appliance information visible and readable. What it does:

• Displays manufacturer model and serial numbers and other factory ID details
• Restores a missing or damaged ID label so technicians can identify the correct parts and specs
• Helps when registering the appliance or filing warranty and service requests
• Prevents delays caused by unreadable or absent identification information

• Clean and dry the mounting surface before applying; remove old adhesive residue
• Align carefully and press firmly; some name plates use adhesive backing or mounting tabs
• Do not cover vents, controls, or safety labels when installing

This glass turntable plate supports cookware and food in the microwave cavity so items heat evenly while the oven runs. It provides a stable, easy-to-clean surface for everyday reheating and defrosting tasks. What it does:

• Supports plates, bowls and containers while the microwave motor rotates the carriage
• Helps produce even heating by allowing food to rotate through the microwave field
• Replaces cracked, chipped or warped turntables that can cause noise or unstable rotation
• Reduces direct contact between food and the microwave floor for easier cleanup

• One glass turntable plate

• Handle carefully — glass can break if dropped or hit
• Match the plate diameter and center hub design to your microwave before installing
• Clean with warm, soapy water; avoid thermal shock from sudden temperature changes
• If rotation problems persist after replacement, inspect the roller ring and drive coupling