Parts for Whirlpool WHD862CHC2: Door Parts

This outer door panel replaces a damaged or dented refrigerator door exterior to restore appearance and protect internal components. It fits the door shell and gives your fridge a finished, uniform look. What it does:

• Replaces a cracked, dented or scratched door exterior to improve appearance
• Shields inner door components and insulation from damage and moisture
• Helps maintain a smooth, sealed surface for normal door operation
• Compatible with factory mounting points for a direct-fit replacement

• Recommended: remove all food and disconnect power before starting repair
• Handle panel edges carefully — wear gloves to avoid sharp sheet-metal edges
• Reuse original screws and brackets unless damaged; verify alignment before tightening

This retainer secures small appliance components to prevent movement and ensure proper alignment during operation. It restores stable fitment so doors, panels, or internal parts stay securely in place and operate quietly. What it does:

• Holds a specific component or trim piece in position to prevent shifting or detachment
• Keeps assemblies aligned to reduce rubbing, rattling, or intermittent contact
• Restores secure fit after a cracked, worn, or missing retainer causes loose parts
• Helps prevent secondary damage from unsecured components moving during use

• One retainer

• Disconnect power before inspecting or replacing parts on electrical appliances
• Remove adjacent panels or trim as needed to access the retainer; retain fasteners for reassembly
• Install the retainer in the OEM orientation until it snaps or seats fully; verify the secured component moves and seals correctly

The Window is an OEM part for Whirlpool dryers. It forms the inner layer of the dryer door, providing insulation and protection to the contents inside the dryer drum. This inner window ensures a clear view of the drying process while preventing heat loss and potential damage to the outer door.

A bad door inner window can occur due to accidental impact, wear and tear, or improper handling. If you notice symptoms such as cracks, fogging, or damage to the inner window, it may be time to replace this part.

Symptoms of a bad door inner window include:

• Visible cracks or damage
• Fogging or cloudiness
• Compromised insulation

Restore your Whirlpool dryer by replacing the faulty or damaged door inner window with this genuine OEM part.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The Seal is an OEM replacement part for Whirlpool dryers. It creates a tight seal between the dryer door and the drum, preventing heat and moisture from escaping during the drying process. It helps maintain the proper temperature inside the dryer, allowing your clothes to dry quickly and evenly.

Symptoms of a faulty door seal include:

• Heat escaping from around the dryer door
• Excessive moisture or lint buildup
• Extended drying times

A bad door seal can occur due to regular use, wear and tear, or accidental damage. If you notice issues such as heat escaping from around the dryer door, excessive moisture or lint buildup, or clothes taking longer to dry than usual, it may be time to replace the door seal.

This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

The Whirlpool Dryer Door Catch is an OEM part for Whirlpool dryers. It secures the dryer door closed during operation, ensuring the safety and proper functioning of the appliance. This component engages with the door latch to hold the door shut, allowing the dryer to operate without interruption.

Causes of a bad dryer door catch can include normal wear and tear from frequent use, accidental damage, or deformation of the catch or latch that prevents proper engagement. Over time, the door catch can become loose or break, necessitating replacement to maintain the dryer's performance and safety.

Symptoms of a bad dryer door catch include:

• The dryer door not staying closed during cycles
• Difficulty closing the door securely
• The dryer stopping mid-cycle due to the door opening

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This genuine mounting screw secures panels and components so assemblies stay aligned and rattle-free. Designed to replace worn or missing fasteners and restore proper fit and function. What it does:

• Secures panels, brackets or trim to prevent movement and vibration
• Restores proper alignment of assemblies that feel loose or shift
• Helps eliminate rattling, squeaks, or parts that fall away during use
• Matches OEM thread and head type for correct fit

• Use the matching screwdriver or bit to avoid stripping the head
• Tighten until snug; do not overtighten which can strip threads or crack plastic
• Replace any additional damaged or missing fasteners for best results
• Disconnect power or follow appliance-specific safety steps before working near wiring or energized components

This hinge is a direct-fit door pivot that supports and guides the appliance door for smooth opening and closing. It restores proper door alignment and helps maintain an even seal for efficient operation. What it does:

• Replaces a worn or damaged door pivot to stop sagging or misalignment
• Restores smooth door movement and reduces binding or catching
• Helps ensure the door seats properly to maintain internal temperature
• Addresses symptoms like a drooping door, uneven gaps, or noisy operation

• One hinge

• Unplug the appliance and shut off water (if applicable) before starting
• Support the door while removing fasteners to prevent dropping or damage
• Compare the old hinge to the new part to confirm orientation before installing
• Tighten mounting screws securely but avoid overtightening; test door operation after installation

This is a replacement mounting screw used to secure panels and internal components on compatible Whirlpool appliances. It restores proper fastening where the original screw is missing, stripped, or damaged for a safe, snug fit. What it does:

• Secures panels, brackets, or small components to the appliance chassis
• Restores lost or damaged fasteners that cause rattling or looseness
• Helps maintain correct alignment of parts that rely on threaded fastening
• Prevents further wear by replacing stripped or corroded screws

• Use the matching screw length and thread engagement; do not force if resistance is encountered
• Tighten firmly but avoid over-torquing which can strip threads or crack plastic
• Disconnect power and follow manufacturer safety instructions before servicing
• Consider replacing all matching fasteners for uniform fit

This factory fastener secures appliance components such as panels, brackets, and handles. Replacing a missing or damaged screw restores a tight fit, reduces rattles, and helps keep parts aligned for smooth, reliable operation.

• Secures components to the appliance frame or assemblies
• Helps maintain alignment and structural stability
• Replaces missing, rusted, or stripped hardware
• Common symptoms include loose/wobbly handles or panels, rattling/vibration noises, or a visibly missing screw

• Disconnect power before servicing
• Use the correct driver/bit and start threads by hand to avoid cross-threading
• Do not overtighten; snug until secure
• Replace any that are corroded or stripped for an even hold