Parts for Whirlpool WRT511SZDB02: Door Parts

This door trim is the finishing piece that frames the appliance door, concealing fasteners and protecting exposed edges. Replacing a damaged trim restores a clean appearance and helps keep door components properly secured as designed.

• Provides a finished border around the door and covers mounting hardware
• Helps protect door edges from chips, cracks, and sharp exposure
• Aids in retaining adjoining parts (panels, glass, nameplate) per design
• Common signs of wear: cracked or missing trim, loose fit, rattling, visible gaps, cosmetic damage

• Disconnect power to the appliance before servicing; allow any hot surfaces to cool
• Wear cut-resistant gloves—sheet metal edges can be sharp
• Remove the door if required, then remove screws/clips to release the old trim; transfer any reusable hardware from the original assembly
• Align and secure the new trim without overtightening to avoid damage

Color: Black

The Handle is an OEM part for Whirlpool refrigerators. It provides the means to easily open and close refrigerator and freezer doors with an ergonomic grip.

Causes of a bad door handle can include cracks, breaks, or missing components that compromise secure closing of doors. Over time, handles can lose tension or experience wear to moving parts.

Symptoms of a failing door handle include:

• Difficulty opening or closing doors securely
• Excessive movement or wobbling of the handle
• Detached or missing handle components
• Inability to open doors fully without force

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This door handle provides a sturdy, comfortable grip for opening and closing the appliance. Replace a cracked, loose, or missing handle to restore safe operation and refresh the appearance of your kitchen or laundry equipment.

• Provides the handhold needed to open and close the appliance door or drawer
• Transfers pulling force to the door without stressing the latch or hinges
• Restores usability and appearance when the original handle is damaged or worn
• Common symptoms: cracked or broken handle, looseness, missing handle, difficulty opening the door

• Disconnect power before servicing; allow hot surfaces to cool if applicable
• Protect surrounding finishes; support the door or drawer to reduce strain while removing/installing the handle
• Refer to your model's parts diagram for fastener type and location; reuse model-specific screws/caps if applicable
• Align the handle and tighten fasteners evenly—do not overtighten

The Handle is an OEM replacement part for Whirlpool top-mount refrigerators that have the freezer on top. It provides an ergonomic grip point used for opening and closing refrigerator doors to access food storage areas.

Symptoms of a bad handle include:  

• Difficulty lifting or turning the handle to open doors
• Looseness, wobbling, or complete detachment from the door  
• Visible cracks, breaks, or splits in the plastic material
• Compromised insulation allowing heat transfer into fridge interior

Causes of a bad handle tend to be wear and fatigue of the plastic over many years of opening/closing cycles. Exposure to outdoor environments or harsh cleaning chemicals may degrade the material prematurely as well.  

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models. 

This door trim is the outer decorative and protective ring that fits around the appliance door opening to restore appearance and help keep the door edge finished. Replace damaged trim to improve the door's look and protect the door edge. What it does

• Covers and protects the outer edge of the door for a finished appearance
• Replaces cracked, dented, or scuffed trim that detracts from the appliance
• Helps maintain a flush fit and reduces the chance of debris catching on the door edge
• Useful when door trim is bent or broken from impact or wear

• One door trim piece as shown

• Disconnect power (and gas if applicable) before starting any repair
• Remove the door from the appliance per the service manual to access trim fasteners
• Use appropriate trim/fastener tools to avoid damaging the new part or surrounding finish

Color: Grey

Color: Grey

Color: Black

Color: Black

Color: Grey

Color: White

The Hole Plug is an OEM part for Whirlpool refrigerators. It plays an important role in sealing openings and holes within the refrigerator door. The plug prevents air leaks, moisture intrusion, and loss of cool air that could compromise cooling performance. 

Symptoms of a bad or missing door hole plug include:

• Increased humidity and moisture buildup inside the refrigerator  
• Difficulty maintaining proper internal temperatures
• Formation of frost or ice around door openings

Causes can be normal wear and tear over time that damages or dislodges the plug. Accidental impact or damage during cleaning could also dislodge it.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement screw secures panels, brackets, or trim within your appliance. Replacing a worn, stripped, or missing screw restores a tight, rattle-free fit so components stay aligned and operate as intended. What it does:

• Fastens components at the original factory locations specified for this part
• Replaces missing, damaged, or stripped screws to restore holding power
• Helps reduce vibration and rattling from loose parts
• Maintains proper alignment of panels, covers, brackets, and trim

• Disconnect power (and gas, if applicable) before servicing
• Match to the original screw and install in the same location and orientation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver or nut-driver; transfer any washers or spacers from the original hardware if present

The Bracket-Door Stop is an OEM replacement part for Whirlpool appliances. This zinc-finished bracket is designed to prevent the appliance door from opening beyond its intended range, protecting both the door and surrounding components from potential damage. It ensures the door stays secure and functions smoothly during regular use.

Symptoms of a bad Bracket-Door Stop include:

• The door overextending when opened
• Difficulty in maintaining the door's position
• Visible bending, cracking, or damage to the bracket

Causes of a failing Bracket-Door Stop can include repeated stress from excessive force when opening the door, normal wear over time, or accidental impacts. A damaged bracket can compromise the door's alignment and overall functionality.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The French Door Bin is an OEM part for Whirlpool refrigerators. This durable bin attaches to the inside of the refrigerator door, offering convenient access to frequently used items such as drinks, condiments, and snacks. 

Causes of a bad French Door Bin can include overloading beyond its weight capacity, impact from items being moved in and out of the refrigerator, or degradation of the material over time due to the cold environment and frequent use.

Symptoms of a malfunctioning French Door Bin include:

• Cracks or breaks in the bin that prevent it from holding items securely
• Difficulty attaching or detaching the bin from the refrigerator door
• The bin sagging or not sitting flush against the door, indicating potential damage or wear

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement handle end cap secures and finishes the end of a door handle. It restores a tight, clean look when the original cap is cracked, stripped, or missing and helps keep the handle firmly attached.

• Anchors and covers the mounting point at the end of the handle
• Helps maintain handle alignment and a solid feel in daily use
• Common fix for a loose or wobbly handle, broken/missing cap, or cosmetic damage
• Resolve gaps at the end of the handle or rattling during use

• Disconnect power to the appliance before servicing
• Support the handle while loosening/removing existing fastener(s) to prevent drops or door damage
• Transfer/reuse any set screw or fastener from the original as required
• Align the new end cap and secure fasteners snugly—do not overtighten

This factory-assembled door unit replaces a damaged or hard-to-close door, restoring proper fit, alignment, and appearance. It's built to match the original, helping the appliance open and close smoothly and operate as designed.

• Forms the complete door structure for the appliance
• Aligns on the hinges for smooth, consistent opening and closing
• Helps ensure proper closure for performance and safety
• Replace if the door is cracked, dented, warped, loose, or won't close/seal correctly

• Disconnect power at the breaker before servicing
• Support the door during removal/installation; large doors can be heavy and awkward
• Transfer any model-specific hardware or trim from the original door as required
• After installation, adjust hinges if needed

This large door bin restores sturdy, easy-access storage on your refrigerator door. Replace a cracked or missing bin to keep condiments and bottles organized, prevent tip-overs, and free up space on the main shelves.

• Holds jars, condiments, and beverages on the door to maximize shelf space
• Replaces bins that are cracked, warped, loose, or missing
• Snaps into the designated large-bin positions for your model
• Helps prevent tipping and spills when opening and closing the door

• Unplug the appliance or disconnect power; remove items from the door
• Align the bin's tabs/hooks with the slots on the door liner
• Lower/slide into place until fully seated—do not force
• The bin is locked in before loading items