Parts for Ge GTS18DCPBLCC: 01 - Doors Parts

This small handle assembly replaces a worn or broken appliance door handle to restore a secure grip and normal door operation. It's a direct-fit replacement designed for fast cosmetic and functional repair. What it does:

• Replaces a damaged or cracked small handle to stop slipping and improve door access
• Restores proper leverage for opening and closing the appliance door
• Matches the original fit and mounting points for a straightforward swap
• Helps eliminate rattling or movement caused by a loose or broken handle

• Basic hand tools typically required;
• Disconnect power and empty the door/drawer before beginning work for safety and easier handling
• Keep mounting screws and trim in a safe place and compare the new part to the old one before installing

This small handle assembly replaces a worn or broken appliance door handle to restore a secure grip and normal door operation. It's a direct-fit replacement designed for fast cosmetic and functional repair. What it does:

• Replaces a damaged or cracked small handle to stop slipping and improve door access
• Restores proper leverage for opening and closing the appliance door
• Matches the original fit and mounting points for a straightforward swap
• Helps eliminate rattling or movement caused by a loose or broken handle

• Basic hand tools typically required;
• Disconnect power and empty the door/drawer before beginning work for safety and easier handling
• Keep mounting screws and trim in a safe place and compare the new part to the old one before installing

This small handle assembly replaces a worn or broken appliance door handle to restore a secure grip and normal door operation. It's a direct-fit replacement designed for fast cosmetic and functional repair. What it does:

• Replaces a damaged or cracked small handle to stop slipping and improve door access
• Restores proper leverage for opening and closing the appliance door
• Matches the original fit and mounting points for a straightforward swap
• Helps eliminate rattling or movement caused by a loose or broken handle

• Basic hand tools typically required;
• Disconnect power and empty the door/drawer before beginning work for safety and easier handling
• Keep mounting screws and trim in a safe place and compare the new part to the old one before installing

The Screw Package is an OEM replacement part for GE refrigerators. It contains a pack of 12 identical screws for miscellaneous securing and assembly needs.

These screws play a supporting role, helping attach shelf tracks, cover panels, door hinges, and other interior parts. By maintaining components securely in place, they help ensure smooth operation and prevent rattling or other noises. 

Symptoms of insufficiently secured parts include:

• Noises heard from loose shelves or door components  
• Detaching handles, hinges, or panels
• Shelves shifting positions or becoming misaligned

Causes of needing replacement screws can include loss, stripping, or wear over time from repeated securement and removal of parts during cleaning or repairs. 

This multipack of GE screws is perfect for minor refrigerator maintenance or to stock up on extras. They are also compatible with replacement hardware from Hotpoint, RCA, and certain Kenmore models. 

This freezer door gasket fits around the door to keep cold air in and moisture out. Replacing a worn or damaged gasket restores proper temperature performance and helps prevent frost and condensation around the freezer opening.

• Creates a tight seal between the freezer door and cabinet
• Helps maintain correct freezer temperature and humidity
• Reduces frost/ice buildup and moisture near the door
• Replaces gaskets that are torn, warped, cracked, shrunken, or not sealing
• Common signs: visible gaps, door not closing fully, frost along the liner, longer run times, or a warming freezer

• Disconnect power; unload items from the freezer door before starting
• Seat the gasket lip evenly into the door channel/retainer all the way around
• Warm the gasket with hot water or a hair dryer on low to help it relax and seal—do not overheat
• Close the door and check for uniform contact; allow time for the gasket to conform

This left-hand shelf front end cap secures the shelf's front trim/rail. Replacing a cracked or missing cap restores a snug, finished fit so the front edge stays aligned and items remain contained.

• Anchors the front rail/trim to the shelf frame
• Helps maintain alignment and support at the shelf's front edge
• Common symptoms: broken or missing cap, loose/wobbly front rail, sagging or misaligned front edge

• Unplug the appliance or turn off power before servicing
• Remove and empty the shelf for easier access; handle glass carefully
• Identify left-hand orientation while facing the unit; align tabs and snap/slide cap into place
• Avoid forcing brittle plastic; do not overtighten any fasteners

This left-hand shelf front cap for refrigerator shelves secures the front trim/rail on the shelf's left side. Replace a cracked or missing cap to restore a snug, reliable fit for the front edge trim.

• Secures the front shelf trim/rail on the left side
• Helps prevent the front edge trim from loosening or falling off
• Restores a clean, finished front edge appearance
• Common symptoms: broken or missing cap, front trim won't stay attached, loose or sagging front trim

• Remove items and the shelf; handle glass carefully to avoid breakage
• Release the old cap's locking tabs, then align and snap the new cap into the front trim/rail
• Reinstall the shelf and ensure the front trim is fully seated

The Gasket Door FF is an OEM part for GE refrigerators. This gasket creates a seal around the door frame of the fresh food compartment, helping to maintain the internal temperature by preventing warm air from entering and cold air from escaping. The white gasket measures approximately 28 x 44 inches.

Causes of a bad door gasket can include regular wear and tear, exposure to temperature fluctuations, or physical damage from repeated opening and closing of the door. A compromised gasket can lead to inefficient cooling and increased energy consumption.

Symptoms of a bad gasket door include:

• Warm spots inside the refrigerator
• Condensation or frost buildup around the door
• The door not closing properly
• Visible cracks, tears, or warping of the gasket

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This front shelf end cap replaces the right-hand piece that anchors the refrigerator shelf's front trim/rail. A secure cap keeps the front edge supported so the trim stays in place and the shelf remains stable.

• Retains the front shelf trim/rail on the right-hand side
• Supports the shelf's front edge to help prevent sagging
• Replaces a cracked, worn, or missing cap
• Common symptoms: trim won't stay attached, loose or wobbly front edge, visible damage to the cap

• Unplug the refrigerator and remove the shelf before servicing
• Handle glass shelves carefully; support both sides to avoid breakage
• Right-hand is determined when facing the shelf from the front; RH is not interchangeable with LH
• Align tabs/slots with the trim and shelf frame; press or snap fully into place, then reinstall the shelf

This flip-up dairy door covers the refrigerator's dairy compartment. Replace a cracked or missing cover to keep butter, cheese, and other small items organized and protected while restoring a clean, finished look to the fresh food door.

• Attaches to the dairy bin on the fresh food door and flips up/down for access
• Helps keep contents contained and protected during door opening/closing
• Restores proper hinge/latch engagement so the bin stays closed
• Common symptoms: cracked cover, broken hinge tabs, loose hinge, or missing door

• Empty the dairy bin and remove the old cover
• Align hinge tabs with the bin's pins and snap into place; no tools typically required
• Handle carefully; if very cold, let the plastic acclimate to room temperature before installation
• Open and close to confirm smooth operation and full seating

This is the front trim/retainer for a full-width refrigerator shelf. Replacing a cracked or missing bar restores a secure front edge so items stay in place and the shelf installs and functions correctly.

• Attaches to the front of a full-width shelf to act as the retaining/trim piece
• Helps keep items from sliding off the shelf during normal use
• Supports proper fit and stability of the shelf assembly
• Typical failure signs: cracked, broken, or loose/missing front bar

• Disconnect power to the refrigerator and remove the shelf before servicing.
• Release the damaged front from its side supports; note orientation.
• Align and slide/snap the new front into the supports until fully seated, then reinstall the shelf.

This reversible door plug covers the unused hinge or mounting hole after changing a door swing, restoring a clean appearance and helping keep out dirt and drafts. Simple, color-matched replacement for a neat finish. What it does:

• Covers exposed hinge or mounting holes on the door edge for a finished look
• Helps block dust, pests and drafts from entering through unused openings
• Matches original geometry to sit flush with the door surface
• Designed to work with reversible door installations where a hole is no longer used

• One (1) reversible door plug

• No tools are typically required; press plug into the unused hole until it seats securely
• Confirm correct orientation before installing to ensure a flush fit
• Inspect surrounding sealing surfaces and clean area before installation
• If plug is damaged or does not seat properly, replace with the exact part number

The Screw is an OEM replacement part for GE refrigerators. Countless screws are used throughout the refrigerator to securely hold parts in place.

Symptoms of a bad or missing screw can include:

• Rattling or vibration noises coming from inside the appliance 
• Doors or other parts that are no longer properly aligned
• Increased frost or cold air leaks due to compromised seals

Causes may include normal wear and tear over time, accidental damage or loss of a screw during repairs, or improper assembly leaving crucial screws omitted. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerators.