Parts for Ge PFIC1NFWBBV: 01 - Doors Parts

Purifies water before reaching your dispenser and ice maker. Replace every 6 months for clean, safe drinking water. Verify fit with your model number.

The Freezer Door Gasket is an OEM replacement part for GE refrigerators responsible for creating an airtight seal around the freezer door, keeping the cold air inside and maintaining the set temperature and preserving the freshness of your frozen items.

A bad freezer door gasket can occur due to wear and tear over time or damage caused by mishandling. If you notice symptoms such as frost buildup inside the freezer, the door not closing properly, or increased energy consumption, it may indicate a need to replace the gasket.

Symptoms of a bad freezer door gasket include:

• Frost accumulation inside the freezer
• Warm spots or uneven cooling in the freezer
• Excessive energy consumption

Restore your refrigerator by replacing the faulty freezer door gasket with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
 

Forms an airtight seal around your refrigerator door to maintain stable temperatures and prevent frost buildup. Replace when worn, torn, or no longer sealing properly.

Refrigerator door gasket creates an airtight seal to keep cold air in. Replace if door won't seal, frost builds up, or gasket is torn. Confirm fit with model.

This freezer trim handle assembly replaces a worn, cracked or missing freezer door trim so the door looks and functions like new. It restores a finished grip area and secures the trim around the freezer door edge. What it does:

• Replaces damaged or broken freezer door trim for improved appearance and safe grip
• Provides the finished trim piece where fingers normally pull the freezer door
• Helps stop loose or rattling trim that can catch on clothing or the freezer gasket
• Matches OEM fit to align with existing door mounting points

• One freezer trim handle assembly as shown

• Basic hand tools typically required; keep fasteners from original part for alignment
• Power off and unplug the appliance or disconnect power at the breaker before starting work
• Handle panels and edges may be sharp—wear gloves and work carefully
• Do not overtighten screws; ensure trim seats evenly to avoid stress or gaps

Freezer door handle trim assembly for your refrigerator. Replaces cracked, broken, or damaged trim pieces around the handle. Essential cosmetic part.

Freezer door cam closure for right-hand side installation. Replace if cam is cracked, broken, or missing to restore proper door alignment and closure.

Right-hand cam closure secures your refrigerator freezer door for a proper latch and tight seal. Replace if cracked, broken, or missing to restore door function.

This cam closure is the left-side closing cam that secures and aligns the freezer door, helping the door latch properly and maintain an even seal to keep the compartment cold. A direct-fit replacement that restores proper door action. What it does:

• Guides and locks the freezer door into the correct closed position
• Helps maintain an even door seal to reduce cold air loss and frost buildup
• Prevents door sagging or misalignment that can keep the door from latching
• Works with the door hinge/latch mechanism to ensure smooth opening and closing

• Disconnect power to the appliance before starting any repair
• Installation may require removing the freezer door or inner door panel; keep fasteners organized
• Handle plastic components carefully to avoid cracking; align cam to hinge before tightening

This cam closure secures the freezer door hinge, helping the door latch properly and maintain a tight seal for consistent cooling. It replaces a worn or broken left-side closure to restore reliable door movement. What it does:

• Acts as the left-side hinge cam that guides and locks the freezer door into position
• Restores proper door alignment and sealing when the closure is worn, cracked, or loose
• Reduces door sag and helps prevent cold air loss and cycling issues
• Works with the freezer hinge assembly to ensure smooth opening and closing

• One left-side cam closure

• Verify left/right orientation before installation; part is specific to the left-side hinge
• Disconnect power to the appliance and remove food from the door area for safe access
• Use basic hand tools; support the door while replacing the cam to avoid damage or injury

Replacement mounting screw for refrigerator panels, brackets, door handles, and trim. Needed when original hardware is missing, stripped, or corroded.

Replacement door connector plate for your refrigerator. Installs between door sections to secure alignment. Replace if cracked, broken, or missing.

Replacement door connector plate for your refrigerator. Mounts between door sections or panels. Order a new plate if yours is cracked or broken.

1/4-10 x 3/4 inch hex washer head screw secures panels, brackets, and components in your refrigerator. Replace when missing, stripped, or broken.

Molded storage basket that organizes frozen foods in the lower freezer compartment. Replace if cracked, broken, or missing to restore proper storage.

This right-side refrigerator door foam assembly restores the insulating core inside the door to help maintain proper cooling and reduce frost and condensation. Fits where the inner door panel uses a molded foam core. What it does:

• Replaces the door's insulating foam core to help reduce cold air loss through the door
• Helps minimize frost buildup and interior condensation around the door area
• Restores proper door fit and thermal performance when foam has deteriorated or separated
• Supports long-term refrigeration efficiency by maintaining the cabinet temperature barrier

• Disconnect power to the appliance before beginning any door work
• Typically installed from inside the door after removing the inner door panel and any trim
• Handle carefully to avoid tearing the foam; align inside the door cavity before reassembly
• If hardware or adhesive is required, reuse existing parts or source OEM-recommended materials

Replace your refrigerator door gasket to restore the airtight seal and prevent cold air loss. Install when gasket is cracked or loose. Confirm fit.

The French Door Gasket is an OEM part for GE refrigerators. This gasket seals the gap between the French doors of the refrigerator, maintaining an airtight seal to prevent warm air from entering and cool air from escaping. It ensures the refrigerator operates efficiently by keeping the internal temperature consistent.

You should replace this French door gasket if it becomes worn out or damaged. Causes of a bad gasket include regular wear and tear, damage from cleaning, or the gasket becoming brittle over time. A compromised gasket can lead to increased energy consumption and food spoilage.

Symptoms of a bad French door gasket include:

• Warm air entering the refrigerator
• Frost buildup around the doors
• Higher than usual energy bills
• The refrigerator door not sealing properly

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Replacement door handle trim assembly for your refrigerator. Installs on the exterior door to restore appearance and grip. Needed when cracked or worn.

Door stop component that prevents your refrigerator door from swinging too far open. Replace this part if broken, cracked, or missing to restore proper door control.

Replacement door stop that limits and stabilizes refrigerator door movement. Needed when the original stop is cracked, broken, or missing to restore proper door alignment and prevent hinge wear.

Plastic retaining clip that secures drawer divider modules in place. Replaces broken, cracked, or missing snuggers to restore proper fit and separation.

This thimble door is the molded trim piece that surrounds the refrigerator/freezer door opening, restoring proper fit and finish. It replaces damaged or worn trim to reduce drafts and improve door alignment and appearance. What it does

• Covers and protects the door opening edge, providing a finished appearance
• Helps maintain a consistent seal by supporting proper door alignment
• Reduces air leaks and drafts at the door opening when installed correctly
• Replaces cracked, warped, or missing trim that can catch or rub during door use

• One thimble door trim piece as shown

• Disconnect power to the appliance before beginning any repair
• Typically secures with clips or screws; inspect existing fasteners and retainers for reuse
• Handle trim gently to avoid cracking; align carefully to ensure a proper fit

Door hinge thimble for refrigerator freezer doors. Installs on door hinge pivot points. Replace if cracked, worn, or missing to restore proper alignment.

Left-hand door closure cam for refrigerators. Installs on the door hinge assembly to control door closure. Replace if cracked, broken, or worn.

Clear flip-up cover for the door-mounted dairy compartment. Replaces cracked, broken, or missing dairy doors to restore a clean look and keep items secure.

Wire beverage rack installs on refrigerator door to organize cans and bottles. Replace if broken, bent, or missing to restore door storage space.

A shelf unit that holds food items in the fresh food compartment of your refrigerator. Located in the main refrigerator section, typically adjustable in height. Replace when the shelf is cracked, warped, or the support mechanisms are broken.

The door shelf bin is a removable storage compartment that attaches to the inside of your refrigerator door, providing easy-access space for condiments, beverages, and small food items. It clips into molded tracks on the door liner and can typically be repositioned at different heights. Replace this part if the bin is cracked, broken, or no longer stays locked in position on the door.

Hex head screw for securing refrigerator components and panels. Replace if screw is stripped, corroded, or missing during repairs or reassembly.

This is a silicon controlled rectifier (SCR) used in appliance control circuits to regulate power to heaters or motors, helping the appliance deliver consistent operation and heat when needed. What it does:

• Acts as a switch in the control circuit to regulate current flow to heating elements or motors
• Can prevent or allow power to the load based on control signals from the appliance module
• Common symptom indicators: intermittent or no heat, unit won't reach operating temperature, or inconsistent operation of the controlled component
• Used where precise control of AC power is required for safe, efficient performance

• One silicon controlled rectifier (SCR) as described

• Disconnect power to the appliance before servicing to avoid shock or injury
• Handle the part carefully; avoid bending terminals and observe anti-static precautions
• Verify wiring and terminal orientation matches the original before reconnecting

Replace your refrigerator's freezer handle end cap if it's cracked, broken, or missing. This cosmetic cap installs on the handle edge for a finished look.

Size: 10-32 GXTT FLP.595 S

This articulation mullion is the flip-out center rail on a French-door refrigerator. It swings into place as the door closes to seal the gap between doors, helping maintain proper temperatures and limit moisture around the center joint.

• Provides the pivoting center rail that engages the opposite door to complete the seal
• Common signs of failure: cracked or loose mullion, won't flip or latch, doors not closing smoothly, or moisture/condensation near the center
• Helps restore proper door sealing and reduce air leaks between doors
• Mounts on the door edge in the same location as the original flipper

• Disconnect power to the refrigerator before servicing
• Remove door bins if needed for access
• Remove mounting screws, lift off the old mullion, position the new mullion, and secure with the original hardware
• Open and close the door to ensure the mullion extends, retracts, and seals correctly

Door bumper for French door refrigerators. Cushions and stops door travel. Replace if cracked, missing, or worn to prevent door damage.

Small cushioning bumper for French-door refrigerators. Prevents door rattling and protects against wear. Replace if cracked, missing, or worn out.

Refrigerator handle trim assembly that installs on the door to provide a finished appearance. Replace if cracked, chipped, discolored, or missing.

Decorative trim piece that covers the top edge of your refrigerator's fresh food door. Replace if cracked, broken, discolored, or missing.

Replaces damaged or worn decorative trim on the front side edge of your refrigerator door. Restores a finished look and protects the door edge.

Replaces the decorative side trim on your refrigerator's fresh food or freezer door. Needed when the original trim is cracked, broken, or missing.

This is a replacement door side trim that restores the finished edge and appearance of the freezer/refrigerator front. It helps cover and protect the door jamb while keeping the cabinet looking complete. What it does

• Replaces damaged or cracked side trim on the front of a refrigerator/freezer door
• Restores a clean, finished appearance and hides the door edge
• Helps protect the door jamb from dings and moisture at the edge
• Works with the existing hinge and door assembly to maintain proper door fit

• One door side trim piece

• Remove power to the appliance before starting repairs and work with the door supported
• Trim typically secures with clips or screws—retain existing fasteners or replace with OEM hardware
• Handle carefully to avoid scratching the finish; align trim before fully fastening

Trim piece that finishes the side edge of your refrigerator door. Replace if cracked, chipped, discolored, or missing for a clean appearance.

Freezer door side trim assembly for your refrigerator. Replaces cracked, broken, or missing trim pieces along the side of the freezer door.

Exterior trim piece for refrigerator. Installs along outer edges or panels. Replace if cracked, broken, discolored, or missing to restore appearance.